At this point I have 18 lines in /etc/slim.conf with the words autologin at the end. One of your scripts is adding it.
My hardware is from the 90’s but it has 500mb flash chip on 44 pin ata module. This is my hdd. I cant install Slitaz in decompressed traditional method.
So I use tazusb-geniso2usb to write iso to internal hdd. In this I use syslinux and make isolinux.cfg and extlinux.conf the same and make static lines for my particular boot needs including a home directory on internal hdd and some modprobes. I would like to do the modprobes after x starts as the devices associate differently /drivers/misc/atlas_btns.ko.gz will grab /dev/input/eventx after x starts but gets /devices/virtual/xxxx if done before. It makes all the difference. How would I modprobe after x starts on slitaz?
Also I have been through all tutorials available on the forum on autostart. If it is installed as live how do I get it to work? I have made xsessions and owned them and all else in tux directory to tux:tux and writefs after each change but after 5 days I can not get it to work based on any provided instructions?
