SliTaz Forum

EeePC R011PX - Webcam non fonctionnel

(12 posts) (3 voices)

• Started 7 years ago by Fallen
• Latest reply from andreid
• This topic is resolved

Tags:

No tags yet.

1. 

   Fallen
   

   offline

   Member

   Bonjour,
   Webcam non fonctionnel mais vue depuis un lsusb !

   Bus 001 Device 002: ID 13d3:5702 IMC Networks UVC VGA Webcam

   comment la configurer pour slitaz 5 SVP ?

   merci

   Posted 7 years ago #
2. 

   andreid
   

   offline

   Member

   Déjà bien qui est ...
   Webcam ne fonctionne pas où?
   Programme? Skype? Оu autre chose?
   Votre ordinateur? Si l'ordinateur portable - juste essayer d'activer Fn+F6 ou Fn+F10

   Posted 7 years ago #
3. 

   Fallen
   

   offline

   Member

   c'est vrai, un peu succin comme explication, je reprends donc,
   le PC est un ultra portable, un EeePC R011PX de chez Asus
   l'OS est sliTaz 5 roling
   Linux kernel: 3.2.71-slitaz

   la cam ne fonctionne pas avec VLC 2.2.3 (seul appli installée pour l'instant)
   capture device
   capture mode : video camera
   video device name :
   audio device name : hw:0,0 (seul choix possible)
   video standard : all

   msg :
   Your input can't be opened:
   VLC is unable to open the MRL 'v4l2://'. Check the log for details.

   lsusb
   Bus Device ID Name
   001 002 13d3:5702 IMC Networks UVC VGA Webcam
   001 001 1d6b:0002 Linux Foundation 2.0 root hub
   005 001 1d6b:0001 Linux Foundation 1.1 root hub
   004 001 1d6b:0001 Linux Foundation 1.1 root hub
   003 001 1d6b:0001 Linux Foundation 1.1 root hub
   002 001 1d6b:0001 Linux Foundation 1.1 root hub

   lspci
   Slot Device Name
   00:00.0 Host bridge Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge
   00:02.0 VGA compatible controller Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
   00:02.1 Display controller Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
   00:1b.0 Audio device Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
   00:1c.0 PCI bridge Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
   00:1c.1 PCI bridge Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02)
   00:1c.3 PCI bridge Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02)
   00:1d.0 USB controller Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
   00:1d.1 USB controller Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
   00:1d.2 USB controller Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
   00:1d.3 USB controller Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
   00:1d.7 USB controller Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
   00:1e.0 PCI bridge Intel Corporation 82801 Mobile PCI Bridge (rev e2)
   00:1f.0 ISA bridge Intel Corporation NM10 Family LPC Controller (rev 02)
   00:1f.2 SATA controller Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] (rev 02)
   01:00.0 Ethernet controller Qualcomm Atheros AR8152 v2.0 Fast Ethernet (rev c1)
   02:00.0 Network controller Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

   Detected PCI devices Kernel modules
   * Builtin module : ahci
   > Module in use : ath9k
   > Module in use : atl1c
   * Builtin module : ehci_hcd
   > Module in use : i915
   > Module in use : intel_agp
   * Builtin module : pcieport
   > Module in use : snd_hda_intel
   * Builtin module : uhci_hcd

   Detected USB devices Kernel modules
   USB2.0 UVC VGA WebCam USB Camera (none)
   EHCI Host Controller hub
   UHCI Host Controller hub
   UHCI Host Controller hub
   UHCI Host Controller hub
   UHCI Host Controller hub

   merci pour votre support

   Posted 7 years ago #
4. 

   andreid
   

   offline

   Member

   1.Installer guvcview
   Le programme se connecte à la caméra?

   2.Essayer Fn+F6 ou Fn+F10 ou Fn+Esc

   Posted 7 years ago #
5. 

   Fallen
   

   offline

   Member

   merci pour votre reponse rapide, malheureusement l’appui sur les touches de fonction ne change rien et Guvcview me renvoi cette erreur !

   Guvcview error:
   Unable to open device
   please make sur the camera is connected and that the correct drivers is installed

   Posted 7 years ago #
6. 

   andreid
   

   offline

   Member

   Très souvent, l'appareil fonctionne dans un seul programme, et ne fonctionne pas dans l'autre ...
   Jusqu'à présent, essayer de tourner la caméra dans les différents programmes...

   Posted 7 years ago #
7. 

   mojo
   

   offline

   Key Master

   tazpkg -gi linux-media

   Posted 7 years ago #
8. 

   andreid
   

   offline

   Member

   Еxactement

   Posted 7 years ago #
9. 

   Fallen
   

   offline

   Member

   tux@liliput:~$ su -c "tazpkg -gi linux-media"
   Password:
   linux-media-3.2.71.t 100% |*******************************| 2341k 0:00:00 ETA

   Installation of package "linux-media"
   ================================================================================
   The Linux kernel media modules.
   --------------------------------------------------------------------------------
   Copying package... [ Done ]
   Extracting package... [ Done ]
   Remember modified packages... [ Done ]
   Installing package... [ Done ]
   Removing all tmp files... [ Done ]
   Execute post-install commands... [ Done ]
   Update system databases... [ Done ]
   ================================================================================
   Package "linux-media" (3.2.71) is installed.

   tux@liliput:~$

   malgre cela, Guvcview ne fonctionne tjrs pas !

   Posted 7 years ago #
10. 

    andreid
    

    offline

    Member

    Recommencer (reboot)
    Fn+?

    Posted 7 years ago #
11. 

    Fallen
    

    offline

    Member

    super ! la cam fonctionne aprés le reboot aussi bien sous VLC que sous Guvcview :)

    merci a vous, je ferme le sujet

    Posted 7 years ago #
12. 

    andreid
    

    offline

    Member

    Échec et mat )))

    Posted 7 years ago #

RSS feed for this topic

Reply

You must log in to post.