SliTaz Forum

1. 

   fsshl
   

   offline

   Member

   after I connect LAN(ethernet) to my cable modem on my linux pc slitaz 5.0, 3.2.71,of Dell Vostro 1500,
   lspci -nnk | grep Netwrok -A2
   0c:00.0 Network controller [0280]: Broadco Corporation BC4311 802.11b/g WLAN [14e4:4311] (rev 01)
   Subsytem: Dell Wireless 1390 WLAN Mini-Card [1028:0007]
   Kernel driver in use: b43-pci-bridge

   ifconfig
   lo Link encap:Local Loopback
   xxxxxxxxxxxxxxxxxxxxxxxxxx

   -----------------------------------------------------------------------------------------------------------------------------------
   so it can not connect or can not browz web, please help(I don't believe my cable modem or LAN line have problem)(this machine 's wi fil, wlan work
   under window vista)
   should I need driver or somewhere misconfigure?

   Posted 7 years ago #
2. 

   fredyfred
   

   offline

   Member

   if I understand you correctly it sounds like you have wifi as an option. I know how to get the wifi on my machine to work..so will explain this:

   In the top panel on the right side theres an icon that looks like two plugs…the 'network connection' icon.
   Click on that for a pop up menu 'connection properties', click on the 'configure' button at the bottom.

   This will ask for the root password 'root' and takes you into the Slitaz panel into the 'Network'.
   (Double) click on 'wlan'.
   If your wifi device is working a list of available networks should appear. (Click 'Scan' if there are none.)

   (if your network is hidden it will appear as '(hidden)'.
   Click on your network…security will change to the right setting ('WPA/WPA2 PSK' - on my PC.)
   Enter your network name and password…and click 'configure.

   Wait a little until the configuration file details are updated.
   Click on the 'network connection' icon in the top panel again…and change the setting to 'wlan0' to see the icon plug indicators working.

   Posted 7 years ago #
3. 

   mojo
   

   offline

   Key Master

   Wifi:
   The rolling iso only includes wireless firmware for ralink and realtek wireless adapters.
   The user must identify their adapter and install the matching firmware.
   b43 driver requires installing http://people.slitaz.org/~mojo/stuff/b43-firmware-4.150.10.5.tazpkg
   After installing firmware the module must be reloaded and /var/log/messages checked to verify the module loaded the firmware without errors.

   Ethernet (Wired Local Area Network):
   Post complete output from lspci -nn

   Posted 7 years ago #
4. 

   fsshl
   

   offline

   Member

   I follow suggestion to download and install that firmware, then after scan, it do show out my wi fi internet name
   "MySpectrumWiFida-2G"
   then I enter password (under seurity WPA/WPA2 PSK), click configure, it look the configuration file is updated, but when I click again top right panel
   s
   connection properties: wlan0
   Status: Disconnected
   ------------
   so it certainly mean not connected, please help again

   --------------------------------------------------------------------------
   regular LAN wire
   after -nn command, it should on my system

   03:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX 14e4:170c] (rev 02)

   plz help on this too

   Posted 7 years ago #
5. 

   fredyfred
   

   offline

   Member

   so it listed your network name...which indicates the wifi is working...as its finding networks...however the lack on connection to your network may indicate a log in failure.

   Id try re-entering the password again...just to make sure there wasn't a typo error.

   Posted 7 years ago #
6. 

   fsshl
   

   offline

   Member

   I tried many times as you suggested, logout then login (or reboot), but still not wor
   at initial boot log, it did showed tried to connect to my wlan wifi supplier, but failed as

   Connecting to MySpetrumWiFida-2G ...
   [Failed] ....... Failed to connet to non-global ctrl_ifname:(null) error No such file or directory

   -----------------

   please help again

   Posted 6 years ago #
7. 

   Timmi
   

   offline

   Member

   I'm no expert, but make sure you select the correct type of encryption and if WPA the correct type of wpa. Also could be an issue with the driver itself, or your firmware. Make sure you have the latest firmware update, just to make sure there are no past lingering bugs or issues in the version you have now.

   Posted 6 years ago #

RSS feed for this topic

Reply

You must log in to post.