SliTaz Forum

Rolling 22-02-2012

(3 posts) (2 voices)

• Started 12 years ago by Trixar_za
• Latest reply from Trixar_za
• This topic is not a support question

Tags:

No tags yet.

1. 

   Trixar_za
   

   offline

   Key Master

   I tried the 4-in-1 iso earlier and here's my experience with it:

   The Default Live mode and Core mode both brought up the following error:
   

   Out of memory: kill process 670 (getty) score 1 or sacrifice child
   Killed process 670 (getty) total-vm:2304KB, anon-rss:56KB, file-rss:448KB

   The process number and KB values are different each time, but the rest of error is always the same.

   Core-Basic: Works up to where you select the keyboard mapping and language at the dialogs. After you click OK, it puts the screen in standby mode and doesn't go any further (same problem as with the last rolling). However running core-basic kmap=us lang=en_US at the command line makes it work fine.

   Just-X and Base: Boots all the way in without any issues.

   Posted 12 years ago #
2. 

   pankso
   

   offline

   Key Master

   Thanks for the feedback, guess you will have same problem with 4.0-RC1 but I hope not :-)

   Posted 12 years ago #
3. 

   Trixar_za
   

   offline

   Key Master

   Probably :P

   Has the Tazpanel file editing bug been fixed? I remember in the previous Rolling it used to add %20 at the end of the conf files you edited using it. This made the affected application throw a command unknown error most of the time.

   There was also the "Only Root Has Internet Access" bug. Where if you used a 3G Modem or Dial Up connection, the normal user wouldn't have access to connection and all applications (like claws-mail and firefox) would throw errors like you weren't connected. When you run the same application as root (using su or sudo) it would work without problems. Note this is without restarting the said connection at all. This is probably a permission issue somewhere.

   I will have a look at it later today and see if they're still there.

   Posted 12 years ago #

RSS feed for this topic

Reply

You must log in to post.