Hi,
First, sorry for my english.
Problem:
I see the list of essid, so I can't connect on it !
I go here before :
http://forum.slitaz.org/topic/slitaz-40-stable-broadcom-4306-unable-to-setup-wifi
http://wireless.kernel.org/en/users/Drivers/b43
http://vanilla.slitaz.org/index.php?p=/discussion/2046/solved-wireless-not-working-broadcom-bcm-4309-on-dell-d400/p1
http://forum.slitaz.org/topic/wn825g-brodcom-wont-work
and I obtain :
Stopping all interfaces
Killing all daemons
Shutting down wifi card
ifconfig: SIOCSIFFLAGS: Operation not possible due to RF-kill
Configuring wlan0...
Starting udhcpc client on: wlan0...
udhcpc (v1.18.4) started
Sending discover...
Sending discover...
Sending discover...
No lease, forking to background
all the time and I don't know why....
Network.conf :
# /etc/network.conf: SliTaz system wide networking configuration.
# Config file used by: /etc/init.d/network.sh
#
# Set default interface.
INTERFACE="wlan0"
# Dynamic IP address.
# Enable/disable DHCP client at boot time.
DHCP="yes"
# Static IP address.
# Enable/disable static IP at boot time.
STATIC="no"
# Set IP address and netmask for a static IP.
IP="192.168.0.6"
NETMASK="255.255.255.0"
# Set route gateway for a static IP.
GATEWAY="192.168.0.1"
# Set DNS server for a static IP.
DNS_SERVER="192.168.0.1"
# Wifi connection.
# Enable/disable wireless connection at boot time.
WIFI="yes"
# Wifi interface (iwconfig) and ESSID.
WIFI_INTERFACE="wlan0"
WIFI_ESSID="BELL422"
WIFI_MODE="managed"
WIFI_KEY="05130597548583869023374683" (exemple)
WIFI_KEY_TYPE="on"
WPA_DRIVER=""
WIFI_CHANNEL=""
WIFI_IWCONFIG_ARGS=""
Thanks for your help. Prime