Hi there,
Please, don't upgrade your Kernel-related packages from 3.2.53 to 3.2.71!
Or you'll finished with broken system after next reboot: no Wi-Fi, no display, maybe something more, only big letters in the black console...
I think, some packages should be recompiled with the new Kernel.
EDIT: Problem solved. I forgot to change "vmlinuz-3.2.53-slitaz" to "vmlinuz-3.2.71-slitaz" in my custom menu.lst
Contents of the boot.log:
(note: /lib/modules/3.2.53-slitaz/kernel/ ... ... No such file or directory; why 3.2.53 while Kernel is 3.2.71?)
Processing: /etc/init.d/rcS...
Mounting proc filesystem on /proc [ Done ]
Mounting devtmpfs filesystem on: /dev [ Done ]
Starting udev daemon...
Udevadm requesting events from the Kernel...
Udevadm waiting for the event queue to finish...
Checking filesystem: /dev/sda7
android: clean, 91357/198400 files, 584403/793419 blocks
Checking filesystem: /dev/sda6
slitaz: clean, 388510/456960 files, 1689668/1826816 blocks (check in 4 mounts)
Checking filesystem: /dev/sda5
/dev/sda5: clean, 44038/65664 files, 228291/262656 blocks
Remounting rootfs read/write...
Mounting filesystems in fstab...
Searching for early boot options... [ Done ]
Cleaning up the system... [ Done ]
Mounting usbfs filesystem on: /proc/bus/usb [ Done ]
Starting system log daemon: syslogd... [ Done ]
Starting kernel log daemon: klogd... [ Done ]
Loading Kernel modules...
Loading module: sdhci_pcimodprobe: ERROR: ctx=0x8065008 path=/lib/modules/3.2.53-slitaz/kernel/drivers/mmc/host/sdhci.ko.xz error=No such file or directory
modprobe: ERROR: ctx=0x8065008 path=/lib/modules/3.2.53-slitaz/kernel/drivers/mmc/host/sdhci.ko.xz error=No such file or directory
modprobe: ERROR: could not insert 'sdhci_pci': Unknown symbol in module, or unknown parameter (see dmesg)
[ Failed ]
Loading module: jmb38x_msmodprobe: ERROR: ctx=0x8065008 path=/lib/modules/3.2.53-slitaz/kernel/drivers/memstick/core/memstick.ko.xz error=No such file or directory
modprobe: ERROR: ctx=0x8065008 path=/lib/modules/3.2.53-slitaz/kernel/drivers/memstick/core/memstick.ko.xz error=No such file or directory
modprobe: ERROR: could not insert 'jmb38x_ms': Unknown symbol in module, or unknown parameter (see dmesg)
[ Failed ]
Loading module: i915modprobe: ERROR: ctx=0x8065008 path=/lib/modules/3.2.53-slitaz/kernel/drivers/char/agp/intel-agp.ko.xz error=No such file or directory
modprobe: ERROR: ctx=0x8065008 path=/lib/modules/3.2.53-slitaz/kernel/drivers/char/agp/intel-agp.ko.xz error=No such file or directory
modprobe: ERROR: could not insert 'i915': Unknown symbol in module, or unknown parameter (see dmesg)
[ Failed ]
Loading module: snd_hda_intelmodprobe: ERROR: ctx=0x8065008 path=/lib/modules/3.2.53-slitaz/kernel/sound/pci/hda/snd-hda-codec.ko.xz error=No such file or directory
modprobe: ERROR: ctx=0x8065008 path=/lib/modules/3.2.53-slitaz/kernel/sound/pci/hda/snd-hda-codec.ko.xz error=No such file or directory
modprobe: ERROR: could not insert 'snd_hda_intel': Unknown symbol in module, or unknown parameter (see dmesg)
[ Failed ]
Loading module: ath5kmodprobe: ERROR: ctx=0x8065008 path=/lib/modules/3.2.53-slitaz/kernel/drivers/net/wireless/ath/ath.ko.xz error=No such file or directory
modprobe: ERROR: ctx=0x8065008 path=/lib/modules/3.2.53-slitaz/kernel/drivers/net/wireless/ath/ath.ko.xz error=No such file or directory
modprobe: ERROR: could not insert 'ath5k': Unknown symbol in module, or unknown parameter (see dmesg)
[ Failed ]
Loading module: agpgart_intelmodprobe: FATAL: Module agpgart_intel not found.
[ Failed ]
Loading module: intel_agpmodprobe: ERROR: ctx=0x8065008 path=/lib/modules/3.2.53-slitaz/kernel/drivers/char/agp/intel-gtt.ko.xz error=No such file or directory
modprobe: ERROR: ctx=0x8065008 path=/lib/modules/3.2.53-slitaz/kernel/drivers/char/agp/intel-gtt.ko.xz error=No such file or directory
modprobe: ERROR: could not insert 'intel_agp': Unknown symbol in module, or unknown parameter (see dmesg)
[ Failed ]
Loading module: r8169 [ Done ]
Triggering udev events: --action=add [ Done ]
Processing: /etc/init.d/bootopts.sh
Checking for SliTaz cmdline options...
Setting system locale to: ru_UA.UTF-8 [ Done ]
Setting system keymap to: ru... [ Done ]
Setting console font to: ter-v14n... [ Done ]
Processing: /etc/init.d/system.sh
Setting system locale: ru_UA.UTF-8 [ Готово ]
Loading console keymap: ruroute: fscanf
ifconfig: Iface: error fetching interface information: Device not found
[ Готово ]
Activating swap memory... [ Готово ]
Веб-сервер TazPanel запускается на порту 82… [ Готово ]
WARNING: Unable to configure sound card
Processing: /etc/init.d/network.sh
Loading network settings from /etc/network.conf
Setting hostname to: slitaz [ Done ]
Configuring loopback... [ Done ]
ifconfig: SIOCGIFFLAGS: No such device
wlan1 is not a Wi-Fi interface, changing it.
Configuring Wi-Fi interface ...lo no wireless extensions.
tunl0 no wireless extensions.
eth1 no wireless extensions.
dummy0 no wireless extensions.
[ Done ]
Change network settings in /etc/wpa/wpa.conf
Starting wpa_supplicant for WPA/WPA2-PSK...
wpa_supplicant: option requires an argument -- 'i'
wpa_supplicant v2.1
Copyright (c) 2003-2014, Jouni Malinen <j@w1.fi> and contributors
This software may be distributed under the terms of the BSD license.
See README for more details.
This product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit (http://www.openssl.org/)
usage:
wpa_supplicant [-BddhKLqqtuvW] [-P<pid file>] [-g<global ctrl>] \
[-G<group>] \
-i<ifname> -c<config file> [-C<ctrl>] [-D<driver>] [-p<driver_param>] \
[-b<br_ifname>] [-e<entropy file>] \
[-o<override driver>] [-O<override ctrl>] \
[-N -i<ifname> -c<conf> [-C<ctrl>] [-D<driver>] \
[-p<driver_param>] [-b<br_ifname>] [-I<config file>] ...]
drivers:
nl80211 = Linux nl80211/cfg80211
wext = Linux wireless extensions (generic)
wired = Wired Ethernet driver
options:
-b = optional bridge interface name
-B = run daemon in the background
-c = Configuration file
-C = ctrl_interface parameter (only used if -c is not)
-i = interface name
-I = additional configuration file
-d = increase debugging verbosity (-dd even more)
-D = driver name (can be multiple drivers: nl80211,wext)
-e = entropy file
-g = global ctrl_interface
-G = global ctrl_interface group
-K = include keys (passwords, etc.) in debug output
-t = include timestamp in debug messages
-h = show this help text
-L = show license (BSD)
-o = override driver parameter for new interfaces
-O = override ctrl_interface parameter for new interfaces
-p = driver parameters
-P = PID file
-q = decrease debugging verbosity (-qq even less)
-u = enable DBus control interface
-v = show version
-W = wait for a control interface monitor before starting
-N = start describing new interface
example:
wpa_supplicant -Dnl80211 -iwlan0 -c/etc/wpa_supplicant.conf
Starting udhcpc client on: ...
udhcpc: SIOCGIFINDEX: No such device
Connecting to Neo...
.....Failed to connect to non-global ctrl_ifname: (null) error: No such file or directory
Failed
Processing: /etc/init.d/local.sh
modprobe: ERROR: ctx=0x8065008 path=/lib/modules/3.2.53-slitaz/kernel/drivers/cpufreq/mperf.ko.xz error=No such file or directory
modprobe: ERROR: ctx=0x8065008 path=/lib/modules/3.2.53-slitaz/kernel/drivers/cpufreq/mperf.ko.xz error=No such file or directory
modprobe: ERROR: could not insert 'acpi_cpufreq': Unknown symbol in module, or unknown parameter (see dmesg)
Error setting new values. Common errors:
- Do you have proper administration rights? (super-user?)
- Is the governor you requested available and modprobed?
- Trying to set an invalid policy?
- Trying to set a specific frequency, but userspace governor is not available,
for example because of hardware which cannot be set to a specific frequency
or because the userspace governor isn't loaded?
Starting X environment...
Starting message bus daemon: DBUS... [ Done ]
Starting all daemons...
Setting up kernel security rules... [ Done ]
WARNING: IPtables rules are disabled
Starting httpd deamon: httpd... [ Done ]
Starting SSH server: Dropbear... [ Done ]
Starting manserver deamon: manserver... [ Done ]
Welcome to your box
__________________________________________________________
I booted Live CD and repacked existing linux-* packages (3.2.53), then installed them to my current SliTaz. Now I have access to Wi-Fi and display.
