F2FS-fs (mmcblk0p3): Can't find a valid F2FS filesystem in first superblock
F2FS-fs (mmcblk0p3): Can't find a valid F2FS filesystem in second superblock
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown block (179,3)
F2FS-fs (mmcblk0p3): Can't find a valid F2FS filesystem in first superblock
F2FS-fs (mmcblk0p3): Can't find a valid F2FS filesystem in second superblock
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown block (179,3)
Followed this [ http://hreikin.wordpress.com/tag/raspberry-pi/#jp-carousel-810 ] & got it working on an old (256MB RAM) RPi
No, those instructions do not work.
Pi simply repeats:
can't open /dev/tty1: Permission denied
can't open /dev/tty2: Permission denied
Wonder if the type of SD-Card used is the cause of the problem. Class 10 cards used to encounter booting problems on some rPi :(
Using a SliTaz 4.0 box, I tried it on two cards & ( used it with adapter)on rPi without encountering any problem.
I tried with two SD cards, a Class 10 and a Class 6.
I followed Mic's instructions exactly.
Same result with each card: can't open dev tty.
I've got the same problem. I tried: two different cards both rpi-base and rpi-desktop images - no luck.
Did any one solved this problem ?
Hi Peterek
There was a bug in the install.sh script: http://hg.slitaz.org/slitaz-arm/rev/9a53e64a39fb
Here's a copy of the updated file: http://hg.slitaz.org/slitaz-arm/file/9a53e64a39fb/rpi/release/install.sh
Change the install part to look like this:
# Install
echo -n "Installing: boot files..."
cp -f boot/* ${boot}; status
echo -n "Installing: rootfs files..."
cp -a rootfs/* ${root};
chown -R root:root ${root}; status
And you should boot OK.
Thank you Paul for quick response! It works!
You must log in to post.