[ 12.877] X.Org X Server 1.9.0 Release Date: 2010-08-20 [ 12.878] X Protocol Version 11, Revision 0 [ 12.878] Build Operating System: Linux 2.6.24-28-server i686 Ubuntu [ 12.878] Current Operating System: Linux pc1 2.6.35-28-generic #50-Ubuntu SMP Fri Mar 18 19:00:26 UTC 2011 i686 [ 12.878] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-28-generic root=UUID=e4a5e83e-666a-4364-af10-0bc2be1fa132 ro quiet splash [ 12.878] Build Date: 09 January 2011 12:14:58PM [ 12.878] xorg-server 2:1.9.0-0ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) [ 12.878] Current version of pixman: 0.18.4 [ 12.878] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 12.878] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 12.878] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 15 12:00:50 2011 [ 12.878] (==) Using config file: "/etc/X11/xorg.conf" [ 12.878] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 12.878] (==) ServerLayout "aticonfig Layout" [ 12.878] (**) |-->Screen "aticonfig-Screen[0]-0" (0) [ 12.878] (**) | |-->Monitor "" [ 12.879] (**) | |-->Device "aticonfig-Device[0]-0" [ 12.879] (==) No monitor specified for screen "aticonfig-Screen[0]-0". Using a default monitor configuration. [ 12.879] (**) |-->Screen "aticonfig-Screen[0]-1" (1) [ 12.879] (**) | |-->Monitor "" [ 12.879] (**) | |-->Device "aticonfig-Device[0]-1" [ 12.879] (==) No monitor specified for screen "aticonfig-Screen[0]-1". Using a default monitor configuration. [ 12.879] (**) |-->Screen "amdcccle-Screen[1]-0" (2) [ 12.879] (**) | |-->Monitor "" [ 12.879] (**) | |-->Device "amdcccle-Device[1]-0" [ 12.879] (==) No monitor specified for screen "amdcccle-Screen[1]-0". Using a default monitor configuration. [ 12.879] (**) Option "Xinerama" "on" [ 12.879] (==) Automatically adding devices [ 12.879] (==) Automatically enabling devices [ 12.879] (**) Xinerama: enabled [ 12.879] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 12.879] Entry deleted from font path. [ 12.879] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 12.879] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 12.879] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 12.879] (II) Loader magic: 0x81f9b00 [ 12.879] (II) Module ABI versions: [ 12.879] X.Org ANSI C Emulation: 0.4 [ 12.879] X.Org Video Driver: 8.0 [ 12.879] X.Org XInput driver : 11.0 [ 12.879] X.Org Server Extension : 4.0 [ 12.880] (--) PCI: (0:1:5:0) 1002:9610:1002:0000 rev 0, Mem @ 0xc0000000/268435456, 0xfdaf0000/65536, 0xfd900000/1048576, I/O @ 0x0000ee00/256 [ 12.880] (--) PCI:*(0:2:0:0) 1002:95c5:174b:e670 rev 0, Mem @ 0xd0000000/268435456, 0xfdfe0000/65536, I/O @ 0x0000de00/256, BIOS @ 0x????????/131072 [ 12.881] (II) Open ACPI successful (/var/run/acpid.socket) [ 12.881] (II) "extmod" will be loaded by default. [ 12.881] (II) "dbe" will be loaded by default. [ 12.881] (II) "glx" will be loaded by default. [ 12.881] (II) "record" will be loaded by default. [ 12.881] (II) "dri" will be loaded by default. [ 12.881] (II) "dri2" will be loaded by default. [ 12.881] (II) LoadModule: "extmod" [ 12.881] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 12.881] (II) Module extmod: vendor="X.Org Foundation" [ 12.881] compiled for 1.9.0, module version = 1.0.0 [ 12.881] Module class: X.Org Server Extension [ 12.881] ABI class: X.Org Server Extension, version 4.0 [ 12.881] (II) Loading extension MIT-SCREEN-SAVER [ 12.881] (II) Loading extension XFree86-VidModeExtension [ 12.881] (II) Loading extension XFree86-DGA [ 12.881] (II) Loading extension DPMS [ 12.881] (II) Loading extension XVideo [ 12.881] (II) Loading extension XVideo-MotionCompensation [ 12.881] (II) Loading extension X-Resource [ 12.881] (II) LoadModule: "dbe" [ 12.882] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 12.882] (II) Module dbe: vendor="X.Org Foundation" [ 12.882] compiled for 1.9.0, module version = 1.0.0 [ 12.882] Module class: X.Org Server Extension [ 12.882] ABI class: X.Org Server Extension, version 4.0 [ 12.882] (II) Loading extension DOUBLE-BUFFER [ 12.882] (II) LoadModule: "glx" [ 12.882] (II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so [ 12.882] (II) Module glx: vendor="FireGL - ATI Technologies Inc." [ 12.882] compiled for 7.6.0, module version = 1.0.0 [ 12.882] (II) Loading extension GLX [ 12.882] (II) LoadModule: "record" [ 12.883] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 12.883] (II) Module record: vendor="X.Org Foundation" [ 12.883] compiled for 1.9.0, module version = 1.13.0 [ 12.883] Module class: X.Org Server Extension [ 12.883] ABI class: X.Org Server Extension, version 4.0 [ 12.883] (II) Loading extension RECORD [ 12.883] (II) LoadModule: "dri" [ 12.883] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 12.883] (II) Module dri: vendor="X.Org Foundation" [ 12.883] compiled for 1.9.0, module version = 1.0.0 [ 12.883] ABI class: X.Org Server Extension, version 4.0 [ 12.883] (II) Loading extension XFree86-DRI [ 12.883] (II) LoadModule: "dri2" [ 12.883] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 12.883] (II) Module dri2: vendor="X.Org Foundation" [ 12.883] compiled for 1.9.0, module version = 1.2.0 [ 12.883] ABI class: X.Org Server Extension, version 4.0 [ 12.883] (II) Loading extension DRI2 [ 12.883] (II) LoadModule: "fglrx" [ 12.883] (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so [ 12.901] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 12.901] compiled for 1.4.99.906, module version = 8.78.30 [ 12.901] Module class: X.Org Video Driver [ 12.901] (II) Loading sub module "fglrxdrm" [ 12.901] (II) LoadModule: "fglrxdrm" [ 12.902] (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so [ 12.902] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 12.902] compiled for 1.8.99.905, module version = 8.78.30 [ 12.902] (II) ATI Proprietary Linux Driver Version Identifier:8.78.30 [ 12.902] (II) ATI Proprietary Linux Driver Release Identifier: 8.78.3 [ 12.902] (II) ATI Proprietary Linux Driver Build Date: Sep 20 2010 21:30:49 [ 12.902] (++) using VT number 7 [ 12.903] (WW) Falling back to old probe method for fglrx [ 12.913] (II) Loading PCS database from /etc/ati/amdpcsdb [ 12.914] (--) Chipset Supported AMD Graphics Processor (0x9610) found [ 12.914] (--) Chipset Supported AMD Graphics Processor (0x95C5) found [ 12.914] (--) Chipset Supported AMD Graphics Processor (0x95C5) found [ 12.914] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found [ 12.914] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found [ 12.914] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found [ 12.914] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found [ 12.914] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found [ 12.914] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found [ 12.914] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found [ 12.914] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found [ 12.914] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found [ 12.914] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found [ 12.914] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found [ 12.914] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found [ 12.914] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found [ 12.914] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found [ 12.914] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 12.914] (II) AMD Video driver is signed [ 12.914] (II) fglrx(0): pEnt->device->identifier=0x92edbf8 [ 12.915] (II) fglrx(1): pEnt->device->identifier=0x92ed618 [ 12.915] (II) fglrx(2): pEnt->device->identifier=0x92ed618 [ 12.915] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === begin [ 12.915] (II) Loading sub module "vgahw" [ 12.915] (II) LoadModule: "vgahw" [ 12.933] (II) Loading /usr/lib/xorg/modules/libvgahw.so [ 12.934] (II) Module vgahw: vendor="X.Org Foundation" [ 12.934] compiled for 1.9.0, module version = 0.1.0 [ 12.934] ABI class: X.Org Video Driver, version 8.0 [ 12.934] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 [ 12.934] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 12.934] (==) fglrx(0): Default visual is TrueColor [ 12.934] (==) fglrx(0): RGB weight 888 [ 12.934] (II) fglrx(0): Using 8 bits per RGB [ 12.934] (==) fglrx(0): Buffer Tiling is ON [ 12.934] (II) Loading sub module "fglrxdrm" [ 12.934] (II) LoadModule: "fglrxdrm" [ 12.934] (II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so [ 12.936] ukiDynamicMajor: found major device number 250 [ 12.936] ukiDynamicMajor: found major device number 250 [ 12.936] ukiOpenByBusid: Searching for BusID PCI:2:0:0 [ 12.936] ukiOpenDevice: node name is /dev/ati/card0 [ 12.936] ukiOpenDevice: open result is 14, (OK) [ 12.936] ukiOpenByBusid: ukiOpenMinor returns 14 [ 12.936] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0 [ 12.936] ukiOpenDevice: node name is /dev/ati/card1 [ 12.936] ukiOpenDevice: open result is 14, (OK) [ 12.936] ukiOpenByBusid: ukiOpenMinor returns 14 [ 12.936] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 [ 12.936] (==) fglrx(0): NoAccel = NO [ 12.936] (==) fglrx(0): ATI 2D Acceleration Architecture enabled [ 12.936] (--) fglrx(0): Chipset: "ATI Radeon HD 3450" (Chipset = 0x95c5) [ 12.936] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe670) [ 12.936] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI [ 12.936] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 [ 12.936] (--) fglrx(0): MMIO registers at 0xfdfe0000 [ 12.936] (--) fglrx(0): I/O port at 0x0000de00 [ 12.936] (==) fglrx(0): ROM-BIOS at 0x000c0000 [ 12.938] (II) fglrx(0): AC Adapter is used [ 12.943] (II) fglrx(0): Primary V_BIOS segment is: 0xc000 [ 13.063] (II) Loading sub module "vbe" [ 13.063] (II) LoadModule: "vbe" [ 13.063] (II) Loading /usr/lib/xorg/modules/libvbe.so [ 13.063] (II) Module vbe: vendor="X.Org Foundation" [ 13.064] compiled for 1.9.0, module version = 1.1.0 [ 13.064] ABI class: X.Org Video Driver, version 8.0 [ 13.064] (II) fglrx(0): VESA BIOS detected [ 13.064] (II) fglrx(0): VESA VBE Version 3.0 [ 13.064] (II) fglrx(0): VESA VBE Total Mem: 16384 kB [ 13.064] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS [ 13.064] (II) fglrx(0): VESA VBE OEM Software Rev: 10.80 [ 13.064] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. [ 13.064] (II) fglrx(0): VESA VBE OEM Product: [ 13.064] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 [ 13.097] (II) fglrx(0): ATI Video BIOS revision 9 or later detected [ 13.097] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR2 [ 13.097] (II) fglrx(0): PCIE card detected [ 13.097] (--) fglrx(0): Using per-process page tables (PPPT) as GART. [ 13.097] (WW) fglrx(0): board is an unknown third party board, chipset is supported [ 13.099] (II) fglrx(0): Using adapter: 2:0.0. [ 13.125] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x20000000) [ 13.163] (II) fglrx(0): Interrupt handler installed at IRQ 45. [ 13.163] (II) fglrx(0): RandR 1.2 support is enabled! [ 13.163] (II) fglrx(0): RandR 1.2 rotation support is enabled! [ 13.163] (==) fglrx(0): Center Mode is disabled [ 13.163] (II) Loading sub module "fb" [ 13.163] (II) LoadModule: "fb" [ 13.163] (II) Loading /usr/lib/xorg/modules/libfb.so [ 13.164] (II) Module fb: vendor="X.Org Foundation" [ 13.164] compiled for 1.9.0, module version = 1.0.0 [ 13.164] ABI class: X.Org ANSI C Emulation, version 0.4 [ 13.164] (==) fglrx(0): Active stereo disabled [ 13.164] (II) Loading sub module "ddc" [ 13.164] (II) LoadModule: "ddc" [ 13.164] (II) Module "ddc" already built-in [ 15.167] (II) fglrx(0): Finished Initialize PPLIB! [ 15.171] (II) fglrx(0): Output DFP1 has no monitor section [ 15.171] (II) fglrx(0): Output DFP2 has no monitor section [ 15.171] (II) fglrx(0): Output CRT1 using monitor section 0-CRT1 [ 15.171] (**) fglrx(0): Option "PreferredMode" "1680x1050" [ 15.171] (**) fglrx(0): Option "Position" "0 0" [ 15.171] (**) fglrx(0): Option "Disable" "false" [ 15.171] (**) fglrx(0): Option "Rotate" "normal" [ 15.171] (**) fglrx(0): Option "TargetRefresh" "60" [ 15.171] (II) fglrx(0): Output CRT2 has no monitor section [ 15.171] (II) fglrx(0): Output TV has no monitor section [ 15.172] (II) fglrx(0): Output CV has no monitor section [ 15.172] (II) Loading sub module "ddc" [ 15.172] (II) LoadModule: "ddc" [ 15.172] (II) Module "ddc" already built-in [ 15.172] (II) fglrx(0): Connected Display0: CRT1 [ 15.172] (II) fglrx(0): Display0 EDID data --------------------------- [ 15.172] (II) fglrx(0): Manufacturer: HWP Model: 26a8 Serial#: 16843009 [ 15.172] (II) fglrx(0): Year: 2007 Week: 20 [ 15.172] (II) fglrx(0): EDID Version: 1.3 [ 15.172] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 15.172] (II) fglrx(0): Sync: Separate [ 15.172] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30 [ 15.172] (II) fglrx(0): Gamma: 2.20 [ 15.172] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 15.172] (II) fglrx(0): Default color space is primary color space [ 15.172] (II) fglrx(0): First detailed timing is preferred mode [ 15.172] (II) fglrx(0): redX: 0.646 redY: 0.339 greenX: 0.290 greenY: 0.603 [ 15.172] (II) fglrx(0): blueX: 0.145 blueY: 0.065 whiteX: 0.313 whiteY: 0.329 [ 15.172] (II) fglrx(0): Supported established timings: [ 15.172] (II) fglrx(0): 720x400@70Hz [ 15.172] (II) fglrx(0): 640x480@60Hz [ 15.172] (II) fglrx(0): 640x480@75Hz [ 15.172] (II) fglrx(0): 800x600@60Hz [ 15.172] (II) fglrx(0): 800x600@75Hz [ 15.172] (II) fglrx(0): 832x624@75Hz [ 15.172] (II) fglrx(0): 1024x768@60Hz [ 15.172] (II) fglrx(0): 1024x768@75Hz [ 15.172] (II) fglrx(0): 1280x1024@75Hz [ 15.172] (II) fglrx(0): 1152x864@75Hz [ 15.172] (II) fglrx(0): Manufacturer's mask: 10 [ 15.172] (II) fglrx(0): Supported standard timings: [ 15.172] (II) fglrx(0): #0: hsize: 1152 vsize 720 refresh: 60 vid: 113 [ 15.172] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 15.172] (II) fglrx(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 15.172] (II) fglrx(0): #3: hsize: 1600 vsize 1000 refresh: 60 vid: 169 [ 15.172] (II) fglrx(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 15.172] (II) fglrx(0): Supported detailed timing: [ 15.172] (II) fglrx(0): clock: 146.2 MHz Image Size: 473 x 296 mm [ 15.172] (II) fglrx(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0 [ 15.172] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0 [ 15.172] (II) fglrx(0): Ranges: V min: 48 V max: 76 Hz, H min: 24 H max: 82 kHz, PixClock max 165 MHz [ 15.172] (II) fglrx(0): Monitor name: HP w2207 [ 15.172] (II) fglrx(0): Serial No: CZD72001JW [ 15.172] (II) fglrx(0): EDID (in hex): [ 15.172] (II) fglrx(0): 00ffffffffffff0022f0a82601010101 [ 15.173] (II) fglrx(0): 14110103682f1e78eeb535a5564a9a25 [ 15.173] (II) fglrx(0): 105054a56b90710081409500a900b300 [ 15.173] (II) fglrx(0): 01010101010121399030621a274068b0 [ 15.173] (II) fglrx(0): 3600d9281100001c000000fd00304c18 [ 15.173] (II) fglrx(0): 5210000a202020202020000000fc0048 [ 15.173] (II) fglrx(0): 502077323230370a20202020000000ff [ 15.173] (II) fglrx(0): 00435a4437323030314a570a202000f8 [ 15.173] (II) fglrx(0): End of Display0 EDID data -------------------- [ 15.173] (II) fglrx(0): Connected Display1: CRT2 [ 15.173] (II) fglrx(0): Display1 EDID data --------------------------- [ 15.173] (II) fglrx(0): Manufacturer: HWP Model: 26a8 Serial#: 16843009 [ 15.173] (II) fglrx(0): Year: 2007 Week: 28 [ 15.173] (II) fglrx(0): EDID Version: 1.3 [ 15.173] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 15.173] (II) fglrx(0): Sync: Separate [ 15.173] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30 [ 15.173] (II) fglrx(0): Gamma: 2.20 [ 15.173] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 15.173] (II) fglrx(0): Default color space is primary color space [ 15.173] (II) fglrx(0): First detailed timing is preferred mode [ 15.173] (II) fglrx(0): redX: 0.646 redY: 0.339 greenX: 0.290 greenY: 0.603 [ 15.173] (II) fglrx(0): blueX: 0.145 blueY: 0.065 whiteX: 0.313 whiteY: 0.329 [ 15.173] (II) fglrx(0): Supported established timings: [ 15.173] (II) fglrx(0): 720x400@70Hz [ 15.173] (II) fglrx(0): 640x480@60Hz [ 15.173] (II) fglrx(0): 640x480@75Hz [ 15.173] (II) fglrx(0): 800x600@60Hz [ 15.173] (II) fglrx(0): 800x600@75Hz [ 15.173] (II) fglrx(0): 832x624@75Hz [ 15.173] (II) fglrx(0): 1024x768@60Hz [ 15.173] (II) fglrx(0): 1024x768@75Hz [ 15.173] (II) fglrx(0): 1280x1024@75Hz [ 15.173] (II) fglrx(0): 1152x864@75Hz [ 15.173] (II) fglrx(0): Manufacturer's mask: 10 [ 15.173] (II) fglrx(0): Supported standard timings: [ 15.173] (II) fglrx(0): #0: hsize: 1152 vsize 720 refresh: 60 vid: 113 [ 15.173] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 15.173] (II) fglrx(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 15.173] (II) fglrx(0): #3: hsize: 1600 vsize 1000 refresh: 60 vid: 169 [ 15.173] (II) fglrx(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 15.173] (II) fglrx(0): Supported detailed timing: [ 15.173] (II) fglrx(0): clock: 146.2 MHz Image Size: 473 x 296 mm [ 15.173] (II) fglrx(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0 [ 15.173] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0 [ 15.173] (II) fglrx(0): Ranges: V min: 48 V max: 76 Hz, H min: 24 H max: 82 kHz, PixClock max 165 MHz [ 15.173] (II) fglrx(0): Monitor name: HP w2207 [ 15.173] (II) fglrx(0): Serial No: CZD72801HK [ 15.173] (II) fglrx(0): EDID (in hex): [ 15.173] (II) fglrx(0): 00ffffffffffff0022f0a82601010101 [ 15.173] (II) fglrx(0): 1c110103682f1e78eeb535a5564a9a25 [ 15.173] (II) fglrx(0): 105054a56b90710081409500a900b300 [ 15.173] (II) fglrx(0): 01010101010121399030621a274068b0 [ 15.173] (II) fglrx(0): 3600d9281100001c000000fd00304c18 [ 15.173] (II) fglrx(0): 5210000a202020202020000000fc0048 [ 15.173] (II) fglrx(0): 502077323230370a20202020000000ff [ 15.173] (II) fglrx(0): 00435a443732383031484b0a202000f6 [ 15.173] (II) fglrx(0): End of Display1 EDID data -------------------- [ 15.475] (II) fglrx(0): Output DFP1 disconnected [ 15.475] (II) fglrx(0): Output DFP2 disconnected [ 15.475] (II) fglrx(0): Output CRT1 connected [ 15.475] (II) fglrx(0): Output CRT2 disconnected [ 15.475] (II) fglrx(0): Output TV disconnected [ 15.475] (II) fglrx(0): Output CV disconnected [ 15.475] (II) fglrx(0): Using user preference for initial modes [ 15.475] (II) fglrx(0): Output CRT1 using initial mode 1680x1050 [ 15.475] (II) fglrx(0): DPI set to (96, 96) [ 15.476] (II) fglrx(0): Adapter ATI Radeon HD 3450 has 2 configurable heads and 2 displays connected. [ 15.476] (==) fglrx(0): PseudoColor visuals disabled [ 15.476] (II) Loading sub module "ramdac" [ 15.476] (II) LoadModule: "ramdac" [ 15.476] (II) Module "ramdac" already built-in [ 15.476] (==) fglrx(0): NoDRI = NO [ 15.476] (==) fglrx(0): Capabilities: 0x00000000 [ 15.476] (==) fglrx(0): CapabilitiesEx: 0x00000000 [ 15.476] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" [ 15.476] (==) fglrx(0): UseFastTLS=0 [ 15.476] (==) fglrx(0): BlockSignalsOnLock=1 [ 15.476] (II) fglrx(1): === [xdl_x760_atiddxPreInit] === begin [ 15.476] (II) Loading sub module "vgahw" [ 15.476] (II) LoadModule: "vgahw" [ 15.477] (II) Reloading /usr/lib/xorg/modules/libvgahw.so [ 15.477] (**) fglrx(1): Depth 24, (--) framebuffer bpp 32 [ 15.477] (II) fglrx(1): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 15.477] (==) fglrx(1): Default visual is TrueColor [ 15.477] (==) fglrx(1): RGB weight 888 [ 15.477] (II) fglrx(1): Using 8 bits per RGB [ 15.477] (==) fglrx(1): Buffer Tiling is ON (copy from primary) [ 15.477] (==) fglrx(1): NoAccel = NO (copy from primary screen) [ 15.477] (==) fglrx(1): ATI 2D Acceleration Architecture enabled [ 15.477] (II) Loading sub module "fb" [ 15.477] (II) LoadModule: "fb" [ 15.477] (II) Reloading /usr/lib/xorg/modules/libfb.so [ 15.477] (II) Loading sub module "ddc" [ 15.477] (II) LoadModule: "ddc" [ 15.477] (II) Module "ddc" already built-in [ 15.477] (II) fglrx(1): Output DFP1 has no monitor section [ 15.477] (II) fglrx(1): Output DFP2 has no monitor section [ 15.477] (II) fglrx(1): Output CRT1 has no monitor section [ 15.477] (II) fglrx(1): Output CRT2 using monitor section 0-CRT2 [ 15.477] (**) fglrx(1): Option "PreferredMode" "1680x1050" [ 15.477] (**) fglrx(1): Option "Position" "0 0" [ 15.477] (**) fglrx(1): Option "Disable" "false" [ 15.477] (**) fglrx(1): Option "Rotate" "normal" [ 15.477] (**) fglrx(1): Option "TargetRefresh" "60" [ 15.477] (II) fglrx(1): Output TV has no monitor section [ 15.478] (II) fglrx(1): Output CV has no monitor section [ 15.478] (II) fglrx(1): Output DFP1 disconnected [ 15.478] (II) fglrx(1): Output DFP2 disconnected [ 15.478] (II) fglrx(1): Output CRT1 disconnected [ 15.478] (II) fglrx(1): Output CRT2 connected [ 15.478] (II) fglrx(1): Output TV disconnected [ 15.478] (II) fglrx(1): Output CV disconnected [ 15.478] (II) fglrx(1): Using user preference for initial modes [ 15.478] (II) fglrx(1): Output CRT2 using initial mode 1680x1050 [ 15.478] (II) fglrx(1): DPI set to (96, 96) [ 15.478] (WW) fglrx(0): Unable to register ADL handler for 0x00110000 [ 15.478] (WW) fglrx(0): Unable to register ADL handler for 0x00120000 [ 15.478] (WW) fglrx(0): Unable to register ADL handler for 0x00130000 [ 15.478] (WW) fglrx(0): Unable to register ADL handler for 0x00150000 [ 15.478] (II) fglrx(1): Adapter ATI Radeon HD 3450 has 2 configurable heads and 2 displays connected. [ 15.478] (==) fglrx(1): PseudoColor visuals disabled [ 15.478] (==) fglrx(1): bNoDRI = NO (copy from primary screen) [ 15.478] (==) fglrx(1): UseFastTLS=0 [ 15.478] (==) fglrx(1): BlockSignalsOnLock=1 [ 15.478] (II) fglrx(2): === [xdl_x760_atiddxPreInit] === begin [ 15.478] (**) fglrx(2): Depth 24, (--) framebuffer bpp 32 [ 15.478] (II) fglrx(2): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 15.478] (==) fglrx(2): Default visual is TrueColor [ 15.478] (==) fglrx(2): RGB weight 888 [ 15.478] (II) fglrx(2): Using 8 bits per RGB [ 15.478] (==) fglrx(2): Buffer Tiling is ON [ 15.478] (II) Loading sub module "fglrxdrm" [ 15.478] (II) LoadModule: "fglrxdrm" [ 15.478] (II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so [ 15.480] ukiDynamicMajor: found major device number 250 [ 15.481] ukiDynamicMajor: found major device number 250 [ 15.481] ukiOpenByBusid: Searching for BusID PCI:1:5:0 [ 15.481] ukiOpenDevice: node name is /dev/ati/card0 [ 15.481] ukiOpenDevice: open result is 20, (OK) [ 15.481] ukiOpenByBusid: ukiOpenMinor returns 20 [ 15.481] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0 [ 15.481] (==) fglrx(2): NoAccel = NO [ 15.481] (==) fglrx(2): ATI 2D Acceleration Architecture enabled [ 15.481] (--) fglrx(2): Chipset: "ATI Radeon HD 3200 Graphics" (Chipset = 0x9610) [ 15.481] (--) fglrx(2): (PciSubVendor = 0x1002, PciSubDevice = 0x0000) [ 15.481] (==) fglrx(2): board vendor info: original ATI graphics adapter [ 15.481] (--) fglrx(2): Linear framebuffer (phys) at 0xc0000000 [ 15.481] (--) fglrx(2): MMIO registers at 0xfdaf0000 [ 15.481] (--) fglrx(2): I/O port at 0x0000ee00 [ 15.481] (==) fglrx(2): ROM-BIOS at 0x000c0000 [ 15.482] (II) fglrx(0): AC Adapter is used [ 15.484] (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled [ 15.498] (II) fglrx(0): ATI Video BIOS revision 9 or later detected [ 15.498] (--) fglrx(2): Video RAM: 262144 kByte, Type: DDR2 [ 15.498] (II) fglrx(2): PCIE card detected [ 15.498] (--) fglrx(2): Using per-process page tables (PPPT) as GART. [ 15.498] (II) fglrx(2): board/chipset is supported by this driver (original ATI board) [ 15.499] (II) fglrx(0): Using adapter: 1:5.0. [ 15.506] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000) [ 15.523] (II) fglrx(0): Interrupt handler installed at IRQ 18. [ 15.523] (II) fglrx(2): RandR 1.2 support is enabled! [ 15.523] (II) fglrx(2): RandR 1.2 rotation support is enabled! [ 15.523] (==) fglrx(2): Center Mode is disabled [ 15.523] (II) Loading sub module "fb" [ 15.523] (II) LoadModule: "fb" [ 15.523] (II) Reloading /usr/lib/xorg/modules/libfb.so [ 15.523] (==) fglrx(2): Active stereo disabled [ 15.523] (II) Loading sub module "ddc" [ 15.523] (II) LoadModule: "ddc" [ 15.523] (II) Module "ddc" already built-in [ 15.923] (WW) fglrx(0): Unable to register ADL handler for 0x00C00000 [ 15.923] (II) fglrx(0): Finished Initialize PPLIB! [ 15.927] (II) fglrx(2): Output DFP1 has no monitor section [ 15.927] (II) fglrx(2): Output CRT1 using monitor section 1-CRT1 [ 15.927] (**) fglrx(2): Option "PreferredMode" "1680x1050" [ 15.927] (**) fglrx(2): Option "Position" "0 0" [ 15.927] (**) fglrx(2): Option "Disable" "false" [ 15.927] (**) fglrx(2): Option "Rotate" "normal" [ 15.927] (**) fglrx(2): Option "TargetRefresh" "60" [ 15.928] (II) Loading sub module "ddc" [ 15.928] (II) LoadModule: "ddc" [ 15.928] (II) Module "ddc" already built-in [ 15.928] (II) fglrx(2): Connected Display0: CRT1 [ 15.928] (II) fglrx(2): Display0 EDID data --------------------------- [ 15.928] (II) fglrx(2): Manufacturer: GSM Model: 567b Serial#: 340573 [ 15.928] (II) fglrx(2): Year: 2009 Week: 3 [ 15.928] (II) fglrx(2): EDID Version: 1.3 [ 15.928] (II) fglrx(2): Analog Display Input, Input Voltage Level: 0.700/0.300 V [ 15.928] (II) fglrx(2): Sync: Separate [ 15.928] (II) fglrx(2): Max Image Size [cm]: horiz.: 47 vert.: 30 [ 15.928] (II) fglrx(2): Gamma: 2.20 [ 15.928] (II) fglrx(2): No DPMS capabilities specified; RGB/Color Display [ 15.928] (II) fglrx(2): First detailed timing is preferred mode [ 15.928] (II) fglrx(2): redX: 0.635 redY: 0.342 greenX: 0.292 greenY: 0.611 [ 15.928] (II) fglrx(2): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329 [ 15.928] (II) fglrx(2): Supported established timings: [ 15.928] (II) fglrx(2): 720x400@70Hz [ 15.928] (II) fglrx(2): 640x480@60Hz [ 15.928] (II) fglrx(2): 640x480@75Hz [ 15.928] (II) fglrx(2): 800x600@60Hz [ 15.928] (II) fglrx(2): 800x600@75Hz [ 15.928] (II) fglrx(2): 832x624@75Hz [ 15.928] (II) fglrx(2): 1024x768@60Hz [ 15.928] (II) fglrx(2): 1024x768@70Hz [ 15.928] (II) fglrx(2): 1024x768@75Hz [ 15.928] (II) fglrx(2): Manufacturer's mask: 0 [ 15.928] (II) fglrx(2): Supported standard timings: [ 15.928] (II) fglrx(2): #0: hsize: 640 vsize 480 refresh: 60 vid: 16433 [ 15.928] (II) fglrx(2): #1: hsize: 800 vsize 600 refresh: 60 vid: 16453 [ 15.928] (II) fglrx(2): #2: hsize: 1024 vsize 768 refresh: 60 vid: 16481 [ 15.928] (II) fglrx(2): #3: hsize: 1400 vsize 1050 refresh: 60 vid: 16528 [ 15.928] (II) fglrx(2): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 15.928] (II) fglrx(2): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 15.928] (II) fglrx(2): Supported detailed timing: [ 15.928] (II) fglrx(2): clock: 147.0 MHz Image Size: 473 x 296 mm [ 15.928] (II) fglrx(2): h_active: 1680 h_sync: 1784 h_sync_end 1968 h_blank_end 2256 h_border: 0 [ 15.928] (II) fglrx(2): v_active: 1050 v_sync: 1051 v_sync_end 1057 v_blanking: 1087 v_border: 0 [ 15.928] (II) fglrx(2): Supported detailed timing: [ 15.928] (II) fglrx(2): clock: 84.6 MHz Image Size: 473 x 296 mm [ 15.928] (II) fglrx(2): h_active: 1360 h_sync: 1424 h_sync_end 1568 h_blank_end 1776 h_border: 0 [ 15.928] (II) fglrx(2): v_active: 768 v_sync: 769 v_sync_end 774 v_blanking: 795 v_border: 0 [ 15.928] (II) fglrx(2): Ranges: V min: 58 V max: 75 Hz, H min: 31 H max: 84 kHz, PixClock max 185 MHz [ 15.928] (II) fglrx(2): Monitor name: LG TV [ 15.928] (II) fglrx(2): EDID (in hex): [ 15.928] (II) fglrx(2): 00ffffffffffff001e6d7b565d320500 [ 15.928] (II) fglrx(2): 03130103082f1e780aaec5a2574a9c25 [ 15.928] (II) fglrx(2): 125054a56e003140454061409040b300 [ 15.928] (II) fglrx(2): 8180010101016c399040621a254068b8 [ 15.928] (II) fglrx(2): 1600d9281100001c0e2150a051001b30 [ 15.928] (II) fglrx(2): 40901500d9281100001c000000fd003a [ 15.928] (II) fglrx(2): 4b1f5412000a202020202020000000fc [ 15.928] (II) fglrx(2): 004c472054560a20202020202020002a [ 15.928] (II) fglrx(2): End of Display0 EDID data -------------------- [ 15.958] (II) fglrx(2): Output DFP1 disconnected [ 15.958] (II) fglrx(2): Output CRT1 connected [ 15.958] (II) fglrx(2): Using user preference for initial modes [ 15.958] (II) fglrx(2): Output CRT1 using initial mode 1680x1050 [ 15.958] (II) fglrx(2): DPI set to (96, 96) [ 15.958] (WW) fglrx(0): Unable to register ADL handler for 0x00110000 [ 15.958] (WW) fglrx(0): Unable to register ADL handler for 0x00120000 [ 15.958] (WW) fglrx(0): Unable to register ADL handler for 0x00130000 [ 15.958] (WW) fglrx(0): Unable to register ADL handler for 0x00150000 [ 15.958] (II) fglrx(2): Adapter ATI Radeon HD 3200 Graphics has 2 configurable heads and 1 displays connected. [ 15.958] (==) fglrx(2): PseudoColor visuals disabled [ 15.958] (II) Loading sub module "ramdac" [ 15.958] (II) LoadModule: "ramdac" [ 15.959] (II) Module "ramdac" already built-in [ 15.959] (==) fglrx(2): NoDRI = NO [ 15.959] (==) fglrx(2): Capabilities: 0x00000000 [ 15.959] (==) fglrx(2): CapabilitiesEx: 0x00000000 [ 15.959] (==) fglrx(2): OpenGL ClientDriverName: "fglrx_dri.so" [ 15.959] (==) fglrx(2): UseFastTLS=0 [ 15.959] (==) fglrx(2): BlockSignalsOnLock=1 [ 15.959] (--) Depth 24 pixmap format is 32 bpp [ 15.959] (II) Loading extension ATIFGLRXDRI [ 15.959] (II) fglrx(0): doing swlDriScreenInit [ 15.959] (II) fglrx(0): swlDriScreenInit for fglrx driver [ 15.959] ukiDynamicMajor: found major device number 250 [ 15.959] ukiDynamicMajor: found major device number 250 [ 15.959] ukiDynamicMajor: found major device number 250 [ 15.959] ukiOpenByBusid: Searching for BusID PCI:2:0:0 [ 15.959] ukiOpenDevice: node name is /dev/ati/card0 [ 15.959] ukiOpenDevice: open result is 21, (OK) [ 15.959] ukiOpenByBusid: ukiOpenMinor returns 21 [ 15.959] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0 [ 15.959] ukiOpenDevice: node name is /dev/ati/card1 [ 15.959] ukiOpenDevice: open result is 21, (OK) [ 15.959] ukiOpenByBusid: ukiOpenMinor returns 21 [ 15.959] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 [ 15.959] (II) fglrx(0): [uki] DRM interface version 1.0 [ 15.959] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0" [ 15.959] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 [ 15.959] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb77bb000 [ 15.959] (II) fglrx(0): [uki] framebuffer handle = 0x3000 [ 15.959] (II) fglrx(0): [uki] added 1 reserved context for kernel [ 15.959] (II) fglrx(0): swlDriScreenInit done [ 15.959] (II) fglrx(0): Kernel Module Version Information: [ 15.959] (II) fglrx(0): Name: fglrx [ 15.959] (II) fglrx(0): Version: 8.78.30 [ 15.959] (II) fglrx(0): Date: Sep 20 2010 [ 15.959] (II) fglrx(0): Desc: ATI FireGL DRM kernel module [ 15.959] (II) fglrx(0): Kernel Module version matches driver. [ 15.959] (II) fglrx(0): Kernel Module Build Time Information: [ 15.959] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.35-28-generic [ 15.960] (II) fglrx(0): Build-Kernel MODVERSIONS: yes [ 15.960] (II) fglrx(0): Build-Kernel __SMP__: yes [ 15.960] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 [ 15.960] (II) fglrx(0): [uki] register handle = 0x00004000 [ 15.973] (II) fglrx(0): Display width adjusted to to 1792 due to alignment constraints [ 15.973] (II) fglrx(0): DRI initialization successfull [ 15.973] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x010a0000 [ 15.973] (II) fglrx(0): FBMM initialized for area (0,0)-(1792,2432) [ 15.973] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1792,1792) (front color buffer - assumption) [ 15.973] (II) fglrx(0): Largest offscreen area available: 1792 x 640 [ 15.973] (==) fglrx(0): Backing store disabled [ 15.973] (II) Loading extension FGLRXEXTENSION [ 15.973] (==) fglrx(0): DPMS enabled [ 15.974] (II) fglrx(0): Initialized in-driver Xinerama extension [ 15.974] (**) fglrx(0): Textured Video is enabled. [ 15.974] (II) LoadModule: "glesx" [ 15.974] (II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so [ 15.975] (II) Module glesx: vendor="X.Org Foundation" [ 15.975] compiled for 1.8.99.905, module version = 1.0.0 [ 15.975] (II) Loading extension GLESX [ 15.975] (II) fglrx(0): GLESX enableFlags = 528 [ 15.975] (II) fglrx(0): GLESX is enabled [ 15.975] (II) fglrx(0): Acceleration enabled [ 15.975] (II) LoadModule: "amdxmm" [ 15.975] (II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so [ 15.976] (II) Module amdxmm: vendor="X.Org Foundation" [ 15.976] compiled for 1.8.99.905, module version = 1.0.0 [ 15.976] (II) Loading extension AMDXVOPL [ 15.976] (II) fglrx(0): Composite extension is not loaded [ 15.976] (II) fglrx(0): X context handle = 0x1 [ 15.976] (II) fglrx(0): [DRI] installation complete [ 15.976] (==) fglrx(0): Silken mouse enabled [ 15.976] (==) fglrx(0): Using HW cursor of display infrastructure! [ 15.976] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. [ 15.976] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero! [ 15.976] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed. [ 15.981] (II) fglrx(0): User Preference Output CRT1 using refresh rate 60.0 Hz. [ 16.380] (--) RandR disabled [ 16.380] (II) fglrx(1): doing swlDriScreenInit [ 16.380] (II) fglrx(1): swlDriScreenInit for fglrx driver [ 16.381] ukiDynamicMajor: found major device number 250 [ 16.381] ukiDynamicMajor: found major device number 250 [ 16.381] ukiDynamicMajor: found major device number 250 [ 16.381] ukiOpenByBusid: Searching for BusID PCI:2:0:0 [ 16.381] ukiOpenDevice: node name is /dev/ati/card0 [ 16.381] ukiOpenDevice: open result is 22, (OK) [ 16.381] ukiOpenByBusid: ukiOpenMinor returns 22 [ 16.381] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0 [ 16.381] ukiOpenDevice: node name is /dev/ati/card1 [ 16.381] ukiOpenDevice: open result is 22, (OK) [ 16.381] ukiOpenByBusid: ukiOpenMinor returns 22 [ 16.381] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 [ 16.381] (II) fglrx(1): [uki] DRM interface version 1.0 [ 16.381] (II) fglrx(1): [uki] created "fglrx" driver at busid "PCI:2:0:0" [ 16.381] (II) fglrx(1): [uki] added 8192 byte SAREA at 0x2000 [ 16.381] (II) fglrx(1): [uki] mapped SAREA 0x2000 to 0xb5de5000 [ 16.381] (II) fglrx(1): [uki] framebuffer handle = 0x3000 [ 16.381] (II) fglrx(1): [uki] added 1 reserved context for kernel [ 16.381] (II) fglrx(1): swlDriScreenInit done [ 16.383] (II) fglrx(1): Display width adjusted to to 1792 due to alignment constraints [ 16.383] (II) fglrx(1): DRI initialization successfull [ 16.383] (II) fglrx(1): FBADPhys: 0xc10bb000 FBMappedSize: 0x00d90000 [ 16.383] (II) fglrx(1): FBMM initialized for area (0,0)-(1792,1984) [ 16.383] (II) fglrx(1): FBMM auto alloc for area (0,0)-(1792,1792) (front color buffer - assumption) [ 16.383] (II) fglrx(1): Largest offscreen area available: 1792 x 192 [ 16.383] (==) fglrx(1): Backing store disabled [ 16.383] (==) fglrx(1): DPMS enabled [ 16.383] (**) fglrx(1): Textured Video is enabled. [ 16.383] (II) fglrx(1): GLESX enableFlags = 528 [ 16.383] (II) fglrx(1): GLESX is enabled [ 16.383] (II) fglrx(1): Acceleration enabled [ 16.383] (II) fglrx(1): Composite extension is not loaded [ 16.383] (II) fglrx(1): X context handle = 0x2 [ 16.383] (II) fglrx(1): [DRI] installation complete [ 16.383] (==) fglrx(1): Silken mouse enabled [ 16.383] (==) fglrx(1): Using HW cursor of display infrastructure! [ 16.383] (II) fglrx(1): Disabling in-server RandR and enabling in-driver RandR 1.2. [ 16.383] (II) fglrx(1): Cannot get TV Format. Set all TV geometry value to zero! [ 16.383] (II) fglrx(1): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed. [ 16.388] (II) fglrx(1): User Preference Output CRT2 using refresh rate 60.0 Hz. [ 16.428] (--) RandR disabled [ 16.428] (II) fglrx(2): doing swlDriScreenInit [ 16.428] (II) fglrx(2): swlDriScreenInit for fglrx driver [ 16.428] ukiDynamicMajor: found major device number 250 [ 16.428] ukiDynamicMajor: found major device number 250 [ 16.428] ukiDynamicMajor: found major device number 250 [ 16.428] ukiOpenByBusid: Searching for BusID PCI:1:5:0 [ 16.428] ukiOpenDevice: node name is /dev/ati/card0 [ 16.428] ukiOpenDevice: open result is 23, (OK) [ 16.428] ukiOpenByBusid: ukiOpenMinor returns 23 [ 16.428] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0 [ 16.428] (II) fglrx(2): [uki] DRM interface version 1.0 [ 16.428] (II) fglrx(2): [uki] created "fglrx" driver at busid "PCI:1:5:0" [ 16.428] (II) fglrx(2): [uki] added 8192 byte SAREA at 0x16000 [ 16.428] (II) fglrx(2): [uki] mapped SAREA 0x16000 to 0xb5049000 [ 16.428] (II) fglrx(2): [uki] framebuffer handle = 0x17000 [ 16.428] (II) fglrx(2): [uki] added 1 reserved context for kernel [ 16.428] (II) fglrx(2): swlDriScreenInit done [ 16.428] (II) fglrx(2): Kernel Module Version Information: [ 16.428] (II) fglrx(2): Name: fglrx [ 16.428] (II) fglrx(2): Version: 8.78.30 [ 16.428] (II) fglrx(2): Date: Sep 20 2010 [ 16.428] (II) fglrx(2): Desc: ATI FireGL DRM kernel module [ 16.428] (II) fglrx(2): Kernel Module version matches driver. [ 16.429] (II) fglrx(2): Kernel Module Build Time Information: [ 16.429] (II) fglrx(2): Build-Kernel UTS_RELEASE: 2.6.35-28-generic [ 16.429] (II) fglrx(2): Build-Kernel MODVERSIONS: yes [ 16.429] (II) fglrx(2): Build-Kernel __SMP__: yes [ 16.429] (II) fglrx(2): Build-Kernel PAGE_SIZE: 0x1000 [ 16.429] (II) fglrx(2): [uki] register handle = 0x00018000 [ 16.442] (II) fglrx(2): Display width adjusted to to 1792 due to alignment constraints [ 16.442] (II) fglrx(2): DRI initialization successfull [ 16.442] (II) fglrx(2): FBADPhys: 0xc0000000 FBMappedSize: 0x010a0000 [ 16.442] (II) fglrx(2): FBMM initialized for area (0,0)-(1792,2432) [ 16.442] (II) fglrx(2): FBMM auto alloc for area (0,0)-(1792,1792) (front color buffer - assumption) [ 16.442] (II) fglrx(2): Largest offscreen area available: 1792 x 640 [ 16.442] (==) fglrx(2): Backing store disabled [ 16.442] (==) fglrx(2): DPMS enabled [ 16.442] (**) fglrx(2): Textured Video is enabled. [ 16.442] (II) fglrx(2): GLESX enableFlags = 528 [ 16.442] (II) fglrx(2): GLESX is enabled [ 16.442] (II) fglrx(2): Acceleration enabled [ 16.442] (II) fglrx(2): Composite extension is not loaded [ 16.442] (II) fglrx(2): X context handle = 0x1 [ 16.442] (II) fglrx(2): [DRI] installation complete [ 16.442] (==) fglrx(2): Silken mouse enabled [ 16.442] (==) fglrx(2): Using HW cursor of display infrastructure! [ 16.442] (II) fglrx(2): Disabling in-server RandR and enabling in-driver RandR 1.2. [ 16.445] (II) fglrx(2): User Preference Output CRT1 using refresh rate 60.0 Hz. [ 16.482] (--) RandR disabled [ 16.482] (II) Initializing built-in extension Generic Event Extension [ 16.482] (II) Initializing built-in extension SHAPE [ 16.482] (II) Initializing built-in extension MIT-SHM [ 16.482] (II) Initializing built-in extension XInputExtension [ 16.482] (II) Initializing built-in extension XTEST [ 16.482] (II) Initializing built-in extension BIG-REQUESTS [ 16.482] (II) Initializing built-in extension SYNC [ 16.483] (II) Initializing built-in extension XKEYBOARD [ 16.483] (II) Initializing built-in extension XC-MISC [ 16.483] (II) Initializing built-in extension SECURITY [ 16.483] (II) Initializing built-in extension XINERAMA [ 16.483] (II) Initializing built-in extension XFIXES [ 16.483] (II) Initializing built-in extension RENDER [ 16.483] (II) Initializing built-in extension RANDR [ 16.483] (II) Initializing built-in extension COMPOSITE [ 16.483] (II) Initializing built-in extension DAMAGE [ 16.483] (II) Initializing built-in extension GESTURE [ 16.486] ukiDynamicMajor: found major device number 250 [ 16.486] ukiDynamicMajor: found major device number 250 [ 16.486] ukiOpenByBusid: Searching for BusID PCI:2:0:0 [ 16.486] ukiOpenDevice: node name is /dev/ati/card0 [ 16.486] ukiOpenDevice: open result is 24, (OK) [ 16.486] ukiOpenByBusid: ukiOpenMinor returns 24 [ 16.486] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0 [ 16.486] ukiOpenDevice: node name is /dev/ati/card1 [ 16.486] ukiOpenDevice: open result is 24, (OK) [ 16.486] ukiOpenByBusid: ukiOpenMinor returns 24 [ 16.486] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 [ 16.544] ukiDynamicMajor: found major device number 250 [ 16.544] ukiDynamicMajor: found major device number 250 [ 16.544] ukiOpenByBusid: Searching for BusID PCI:1:5:0 [ 16.544] ukiOpenDevice: node name is /dev/ati/card0 [ 16.544] ukiOpenDevice: open result is 26, (OK) [ 16.544] ukiOpenByBusid: ukiOpenMinor returns 26 [ 16.544] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0 [ 16.606] (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so [ 16.606] (II) GLX: Initialized DRI GL provider for screen 0 [ 16.607] ukiDynamicMajor: found major device number 250 [ 16.607] ukiDynamicMajor: found major device number 250 [ 16.607] ukiOpenByBusid: Searching for BusID PCI:2:0:0 [ 16.607] ukiOpenDevice: node name is /dev/ati/card0 [ 16.607] ukiOpenDevice: open result is 27, (OK) [ 16.607] ukiOpenByBusid: ukiOpenMinor returns 27 [ 16.607] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0 [ 16.607] ukiOpenDevice: node name is /dev/ati/card1 [ 16.607] ukiOpenDevice: open result is 27, (OK) [ 16.607] ukiOpenByBusid: ukiOpenMinor returns 27 [ 16.607] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 [ 16.607] (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so [ 16.607] (II) GLX: Initialized DRI GL provider for screen 1 [ 16.607] ukiDynamicMajor: found major device number 250 [ 16.607] ukiDynamicMajor: found major device number 250 [ 16.607] ukiOpenByBusid: Searching for BusID PCI:1:5:0 [ 16.607] ukiOpenDevice: node name is /dev/ati/card0 [ 16.607] ukiOpenDevice: open result is 28, (OK) [ 16.607] ukiOpenByBusid: ukiOpenMinor returns 28 [ 16.607] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0 [ 16.607] (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so [ 16.607] (II) GLX: Initialized DRI GL provider for screen 2 [ 16.632] (II) fglrx(0): Enable the clock gating! [ 16.633] (II) fglrx(2): Enable the clock gating! [ 16.653] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 16.661] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 16.661] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 16.661] (II) LoadModule: "evdev" [ 16.662] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 16.662] (II) Module evdev: vendor="X.Org Foundation" [ 16.662] compiled for 1.9.0, module version = 2.3.2 [ 16.662] Module class: X.Org XInput Driver [ 16.662] ABI class: X.Org XInput driver, version 11.0 [ 16.662] (**) Power Button: always reports core events [ 16.662] (**) Power Button: Device: "/dev/input/event1" [ 16.672] (II) Power Button: Found keys [ 16.672] (II) Power Button: Configuring as keyboard [ 16.672] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 16.672] (**) Option "xkb_rules" "evdev" [ 16.672] (**) Option "xkb_model" "evdev" [ 16.672] (**) Option "xkb_layout" "gb" [ 16.674] (II) XKB: reuse xkmfile /var/lib/xkb/server-C1F82522E3F958F13C2D6D2C62551E135092F235.xkm [ 16.676] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 16.676] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 16.676] (**) Power Button: always reports core events [ 16.676] (**) Power Button: Device: "/dev/input/event0" [ 16.688] (II) Power Button: Found keys [ 16.688] (II) Power Button: Configuring as keyboard [ 16.688] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 16.688] (**) Option "xkb_rules" "evdev" [ 16.688] (**) Option "xkb_model" "evdev" [ 16.688] (**) Option "xkb_layout" "gb" [ 16.691] (II) config/udev: Adding input device GASIA PS2toUSB Adapter (/dev/input/event2) [ 16.691] (**) GASIA PS2toUSB Adapter: Applying InputClass "evdev keyboard catchall" [ 16.691] (**) GASIA PS2toUSB Adapter: always reports core events [ 16.691] (**) GASIA PS2toUSB Adapter: Device: "/dev/input/event2" [ 16.704] (II) GASIA PS2toUSB Adapter: Found keys [ 16.704] (II) GASIA PS2toUSB Adapter: Configuring as keyboard [ 16.704] (II) XINPUT: Adding extended input device "GASIA PS2toUSB Adapter" (type: KEYBOARD) [ 16.704] (**) Option "xkb_rules" "evdev" [ 16.704] (**) Option "xkb_model" "evdev" [ 16.704] (**) Option "xkb_layout" "gb" [ 16.705] (II) config/udev: Adding input device GASIA PS2toUSB Adapter (/dev/input/event3) [ 16.705] (**) GASIA PS2toUSB Adapter: Applying InputClass "evdev pointer catchall" [ 16.705] (**) GASIA PS2toUSB Adapter: Applying InputClass "evdev keyboard catchall" [ 16.705] (**) GASIA PS2toUSB Adapter: always reports core events [ 16.705] (**) GASIA PS2toUSB Adapter: Device: "/dev/input/event3" [ 16.720] (II) GASIA PS2toUSB Adapter: Found 9 mouse buttons [ 16.720] (II) GASIA PS2toUSB Adapter: Found scroll wheel(s) [ 16.720] (II) GASIA PS2toUSB Adapter: Found relative axes [ 16.720] (II) GASIA PS2toUSB Adapter: Found x and y relative axes [ 16.720] (II) GASIA PS2toUSB Adapter: Found absolute axes [ 16.720] (II) evdev-grail: failed to open grail, no gesture support [ 16.720] (II) GASIA PS2toUSB Adapter: Found keys [ 16.720] (II) GASIA PS2toUSB Adapter: Configuring as mouse [ 16.720] (II) GASIA PS2toUSB Adapter: Configuring as keyboard [ 16.720] (**) GASIA PS2toUSB Adapter: YAxisMapping: buttons 4 and 5 [ 16.720] (**) GASIA PS2toUSB Adapter: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 16.720] (II) XINPUT: Adding extended input device "GASIA PS2toUSB Adapter" (type: KEYBOARD) [ 16.720] (**) Option "xkb_rules" "evdev" [ 16.720] (**) Option "xkb_model" "evdev" [ 16.720] (**) Option "xkb_layout" "gb" [ 16.721] (II) GASIA PS2toUSB Adapter: initialized for relative axes. [ 16.721] (WW) GASIA PS2toUSB Adapter: ignoring absolute axes. [ 16.721] (II) config/udev: Adding input device GASIA PS2toUSB Adapter (/dev/input/mouse0) [ 16.721] (II) No input driver/identifier specified (ignoring) [ 16.782] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments [ 16.782] (II) fglrx(1): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments [ 16.782] (II) fglrx(2): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments