Bonjour,
je viens d'installer SliTaz 4.0 sur le disque dur de mon PC (il n'y a aucun autre système). Je n'arrive pas à mettre la wifi, ni à me connecter par câble.
Après avoir cherché des infos : j'ai installé le module ipw2200 qui manquait, téléchargé depuis
wget http://people.slitaz.org/~mojo/stuff/ipw2200-firmware-3.1.tazpkg.
j'ai suivi la procédure de dépannage (http://doc.slitaz.org/fr:guides:wifi-easy#demarrer-le-wifi), voici les résultats mais je n'y comprends rien à vrai dire.
Pouvez-vous m'aider ? Un grand merci ! (Je suis vraiment débutante et je peux comprendre vite mais il faut m'expliquer longtemps et surtout, précisément sans vouloir abuser de votre temps)
root@slitaz:/home/tux# lspci grep -i network
Usage: lspci [<switches>]
Basic display modes:
-mm Produce machine-readable output (single -m for an obsolete format)
-t Show bus tree
Display options:
-v Be verbose (-vv for very verbose)
-k Show kernel drivers handling each device
-x Show hex-dump of the standard part of the config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-b Bus-centric view (addresses and IRQ's as seen by the bus)
-D Always show domain numbers
Resolving of device ID's to names:
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-q Query the PCI ID database for unknown ID's via DNS
-qq As above, but re-query locally cached entries
-Q Query the PCI ID database for all ID's via DNS
Selection of devices:
-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots
-d [<vendor>]:[<device>] Show only devices with specified ID's
Other options:
-i <file> Use specified ID database instead of network
-p <file> Look up kernel modules in a given file instead of default modules.pcimap
-M Enable `bus mapping' mode (dangerous; root only)
PCI access options:
-A <method> Use the specified PCI access method (see `-A help' for a list)
-O <par>=<val> Set PCI access parameter (see `-O help' for a list)
-G Enable PCI access debugging
-H <mode> Use direct hardware access (<mode> = 1 or 2)
-F <file> Read PCI configuration dump from a given file
root@slitaz:/home/tux# modprobe your_module
modprobe: module your_module not found in modules.dep
root@slitaz:/home/tux# dmesg tail
nyansky <maxk@qualcomm.com>
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 6, io base 0x00001800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 6 (level, low) -> IRQ 6
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 6, io base 0x00001820
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 6 (level, low) -> IRQ 6
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 6, io base 0x00001840
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
hub 2-0:1.0: over-current change on port 1
hub 2-0:1.0: over-current change on port 2
hub 1-0:1.0: over-current change on port 1
hub 1-0:1.0: over-current change on port 2
usb 4-2: new low speed USB device using uhci_hcd and address 2
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000/0x0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input3
generic-usb 0003:046D:C05B.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2/input0
EXT4-fs (hda1): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext2 filesystem) readonly on device 3:1.
Freeing unused kernel memory: 408k freed
EXT4-fs (hda1): re-mounted. Opts: barrier=1,data=writeback
EXT4-fs (hda1): re-mounted. Opts: barrier=1,data=writeback
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 855GM Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Intel ICH 0000:00:1f.5: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 50259 usecs (2423 samples)
intel8x0: clocking to 48000
Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
MC'97 0 converters and GPIO not ready (0x1)
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: power state changed by ACPI to D0
radeon 0000:01:00.0: power state changed by ACPI to D0
radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6
[drm] initializing kernel modesetting (RV350 0x1002:0x4E50).
[drm] register mmio base: 0xD0100000
[drm] register mmio size: 65536
agpgart-intel 0000:00:00.0: AGP 2.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode
radeon 0000:01:00.0: putting AGP V2 device into 1x mode
radeon 0000:01:00.0: GTT: 256M 0xE0000000 - 0xEFFFFFFF
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:00.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (64M used)
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 256358 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 64M of VRAM memory ready
[drm] radeon: 256M of GTT memory ready.
[drm] radeon: 1 quad pipes, 1 Z pipes initialized.
radeon 0000:01:00.0: WB disabled
[drm] Loading R300 Microcode
[drm] radeon: ring at 0x00000000E0001000
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Panel ID String: QDS
[drm] Panel Size 1280x800
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] LVDS
[drm] Encoders:
[drm] LCD1: INTERNAL_LVDS
[drm] Connector 2:
[drm] S-video
[drm] Encoders:
[drm] TV1: INTERNAL_DAC2
[drm] radeon: power management initialized
[drm] fb mappable at 0xD8040000
[drm] vram apper at 0xD8000000
[drm] size 4096000
[drm] fb depth is 24
[drm] pitch is 5120
Console: switching to colour frame buffer device 160x50
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.7.0 20080528 for 0000:01:00.0 on minor 0
b44 0000:02:02.0: PCI INT A -> Link[LNKD] -> GSI 6 (level, low) -> IRQ 6
ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x04, vendor 0x4243)
ssb: Core 1 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
ssb: Core 2 found: PCI (cc 0x804, rev 0x02, vendor 0x4243)
ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
b44: b44.c:v2.0
b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:c0:9f:5b:ac:6f
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
cfg80211: Calling CRDA to update world regulatory domain
libipw: 802.11 data/management/control stack, git-1.1.13
libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200 0000:02:04.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
ipw2200: Unable to load firmware: -2
ipw2200: failed to register network device
ipw2200 0000:02:04.0: PCI INT A disabled
ipw2200: probe of 0000:02:04.0 failed with error -5
yenta_cardbus 0000:02:06.0: CardBus bridge found [1025:0064]
yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
yenta_cardbus 0000:02:06.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:06.0: TI: mfunc 0x01a21b22, devctl 0x64
yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x08b8, PCI irq 10
yenta_cardbus 0000:02:06.0: Socket status: 30000006
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: excluding 0x4000-0x40ff 0x4400-0x44ff
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xd05fffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0200000-0xd05fffff: excluding 0xd0200000-0xd023ffff
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x25ffffff pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x25ffffff: excluding 0x20000000-0x25ffffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1c0-0x1cf 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input7
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
b44 ssb0:0: eth0: Flow control is off for TX and off for RX
mtrr: no MTRR for d8000000,4000000 found
usb 1-4: new high speed USB device using ehci_hcd and address 3
scsi0 : usb-storage 1-4:1.0
scsi 0:0:0:0: Direct-Access Sony Storage Media 1.00 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
usb 1-4: USB disconnect, address 3
usb 4-2: USB disconnect, address 2
usb 1-3: new high speed USB device using ehci_hcd and address 4
scsi1 : usb-storage 1-3:1.0
scsi 1:0:0:0: Direct-Access Sony Storage Media 1.00 PQ: 0 ANSI: 2
sd 1:0:0:0: [sda] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI removable disk
usb 4-2: new low speed USB device using uhci_hcd and address 3
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input8
generic-usb 0003:046D:C05B.0002: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2/input0
b44 ssb0:0: eth0: powering down PHY
b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
b44 ssb0:0: eth0: Flow control is off for TX and off for RX
b44 ssb0:0: eth0: powering down PHY
b44 ssb0:0: eth0: powering down PHY
b44 ssb0:0: eth0: powering down PHY
b44 ssb0:0: eth0: powering down PHY
b44 ssb0:0: eth0: powering down PHY
b44 ssb0:0: eth0: powering down PHY
usb 4-2: USB disconnect, address 3
usb 4-2: new low speed USB device using uhci_hcd and address 4
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input9
generic-usb 0003:046D:C05B.0003: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2/input0
usb 1-3: USB disconnect, address 4
usb 4-2: USB disconnect, address 4
usb 1-3: new high speed USB device using ehci_hcd and address 7
scsi2 : usb-storage 1-3:1.0
scsi 2:0:0:0: Direct-Access Sony Storage Media 1.00 PQ: 0 ANSI: 2
sd 2:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
usb 4-2: new low speed USB device using uhci_hcd and address 5
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input10
generic-usb 0003:046D:C05B.0004: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2/input0
usb 1-3: USB disconnect, address 7
usb 4-2: USB disconnect, address 5
usb 1-3: new high speed USB device using ehci_hcd and address 9
scsi3 : usb-storage 1-3:1.0
scsi 3:0:0:0: Direct-Access Sony Storage Media 1.00 PQ: 0 ANSI: 2
sd 3:0:0:0: [sdc] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sdc] Assuming drive cache: write through
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1 sdc2
sd 3:0:0:0: [sdc] Assuming drive cache: write through
sd 3:0:0:0: [sdc] Attached SCSI removable disk
usb 4-2: new low speed USB device using uhci_hcd and address 6
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input11
generic-usb 0003:046D:C05B.0005: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2/input0
usb 1-3: USB disconnect, address 9
usb 4-2: USB disconnect, address 6
usb 4-2: new low speed USB device using uhci_hcd and address 7
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input12
generic-usb 0003:046D:C05B.0006: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2/input0
b44 ssb0:0: eth0: powering down PHY
usb 4-2: USB disconnect, address 7
usb 1-3: new high speed USB device using ehci_hcd and address 12
scsi4 : usb-storage 1-3:1.0
scsi 4:0:0:0: Direct-Access Sony Storage Media 1.00 PQ: 0 ANSI: 2
sd 4:0:0:0: [sdd] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdd] Assuming drive cache: write through
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1 sdd2
sd 4:0:0:0: [sdd] Assuming drive cache: write through
sd 4:0:0:0: [sdd] Attached SCSI removable disk
usb 4-2: new low speed USB device using uhci_hcd and address 8
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input13
generic-usb 0003:046D:C05B.0007: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2/input0
root@slitaz:/home/tux# lsmod
Module Size Used by Not tainted
video 9783 0
output 1144 1 video
button 3602 0
pcmcia 24993 0
yenta_socket 16223 0
pcmcia_rsrc 6989 1 yenta_socket
pcmcia_core 8413 3 pcmcia,yenta_socket,pcmcia_rsrc
ipw2200 108387 0
libipw 17987 1 ipw2200
cfg80211 99896 2 ipw2200,libipw
rfkill 10682 1 cfg80211
lib80211 2676 2 ipw2200,libipw
b44 20102 0
ssb 24436 1 b44
radeon 673881 1
ttm 35361 1 radeon
drm_kms_helper 18798 1 radeon
drm 111992 3 radeon,ttm,drm_kms_helper
hwmon 993 1 radeon
i2c_algo_bit 3479 1 radeon
i2c_core 12192 4 radeon,drm_kms_helper,drm,i2c_algo_bit
snd_intel8x0m 8083 0
snd_intel8x0 19786 1
snd_ac97_codec 77963 2 snd_intel8x0m,snd_intel8x0
ac97_bus 718 1 snd_ac97_codec
snd_pcm 43737 3 snd_intel8x0m,snd_intel8x0,snd_ac97_codec
snd_timer 12515 1 snd_pcm
snd 33394 7 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 3357 1 snd
snd_page_alloc 4853 3 snd_intel8x0m,snd_intel8x0,snd_pcm
intel_agp 7908 1
intel_gtt 9214 1 intel_agp
agpgart 18221 4 ttm,drm,intel_agp,intel_gtt
/etc/network.conf: SliTaz system wide networking configuration.
# Config file used by: /etc/init.d/network.sh
#
# Set default interface.
INTERFACE="eth0"
# Dynamic IP address.
# Enable/disable DHCP client at boot time.
DHCP="yes"
# Static IP address.
# Enable/disable static IP at boot time.
STATIC="no"
# Set IP address and netmask for a static IP.
IP="192.168.0.6"
NETMASK="255.255.255.0"
[ Lecture de 38 lignes ]
^G Aide ^O Écrire ^R Lire fich.^Y Page préc.^K Couper ^C Pos. cur.
^X Quitter ^J Justifier ^W Chercher ^V Page suiv.^U Coller ^T Orthograp.
root@slitaz:/home/tux# ifconfig eth1 up
ifconfig: SIOCGIFFLAGS: No such device
root@slitaz:/home/tux# ifconfig -a
dummy0 Link encap:Ethernet HWaddr 4E:3F:B7:6F:AE:B2
BROADCAST NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 00:C0:9F:5B:AC:6F
inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:46 errors:0 dropped:4 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5254 (5.1 KiB) TX bytes:1304 (1.2 KiB)
Interrupt:6
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:3076 errors:0 dropped:0 overruns:0 frame:0
TX packets:3076 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:611634 (597.2 KiB) TX bytes:611634 (597.2 KiB)
root@slitaz:/home/tux# iwconfig
lo no wireless extensions.
dummy0 no wireless extensions.
eth0 no wireless extensions.
root@slitaz:/home/tux# /etc/init.d/network.sh restart
Stopping all interfaces
ifconfig: SIOCGIFFLAGS: No such device
Killing all daemons
killall: udhcpc: no process killed
wlan0 No such device
wlan0 is not a wifi interface, changing it.
Configuring ...lo no wireless extensions.
dummy0 no wireless extensions.
eth0 no wireless extensions.
[ OK ]
iwconfig: unknown command "any"
Starting udhcpc client on: ...
udhcpc: SIOCGIFINDEX: No such device
root@slitaz:/home/tux# ifconfig -a
dummy0 Link encap:Ethernet HWaddr 4E:3F:B7:6F:AE:B2
BROADCAST NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 00:C0:9F:5B:AC:6F
inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:46 errors:0 dropped:4 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5254 (5.1 KiB) TX bytes:1304 (1.2 KiB)
Interrupt:6
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:3076 errors:0 dropped:0 overruns:0 frame:0
TX packets:3076 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:611634 (597.2 KiB) TX bytes:611634 (597.2 KiB)
