Hi, I have this bluetooth that works funny. It sends files to android devices but does not receive them (connection failed).
Using other devices (old cell phones) it works both ways.
It is not an internal software problem in slitaz, because if I apply a bluetooth usb stick, everything works fine.
The notebook is a Toshiba Satellite Pro A300, and the integrated peripheral from the label below shows QDS-BRCM1032
tux@slitaz:~$ lspci -nnk | grep -iA3 net; lsusb; hciconfig -a; rfkill list all;
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
hci0: Type: BR/EDR Bus: USB
BD Address: 00:03:7A:98:DA:10 ACL MTU: 1021:6 SCO MTU: 64:1
DOWN
RX bytes:467 acl:0 sco:0 events:18 errors:0
TX bytes:317 acl:0 sco:0 commands:18 errors:0
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x79 0x83
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
https://industrycanada.co/4324A-BRCM1032
https://github.com/winterheart/broadcom-bt-firmware
Is there a firmware somewhere for you to upload it?
I couldn't find it anywhere...
Thanks in advance!
