SliTaz Forum

installation EeePC701

(23 posts) (3 voices)

• Started 12 years ago by familypm
• Latest reply from familypm
• This topic is not a support question

Tags:

No tags yet.

1. 

   familypm
   

   offline

   Member

   Bonjour,

   J'ai installé Slitaz 3.0 sur mon EeePC 701 (avec aussi le plug-in EeePC : http://hg.slitaz.org/wok/raw-file/tip/slitaz-eeepc/stuff/eeepc.html). Il fonctionne parfaitement, avec deux problèmes : la webcam n'est pas reconnue, ce qui n'est pas vraiment un problème, mais aussi mon modem USRobotics 5637 n'est pas non plus reconnu. J'ai téléchargé et exécuté le firmware proposé chez USRobotics (http://www.usr.com/support/5637/5637-files/1.2.19USRFlash.zip) :

   The attached zip file contains the following files:

   modem_ei.hex > 1.2.19 modem firmware
   ocmfldr.hex > Firmware loader
   mdmflash > Compiled executable for 2.6.x kernels only.

   Run the mdmflash file from a terminal prompt to update the modem firmware
   Example: user@domain:~$ ./mdmflash

   sans résultat.

   Comme j'utilise ce modem en déplacement lorsque je n'ai pas l'accès au WiFi, j'ai réinstallé Xandros sur mon EeePC (qui lui reconnait automatiquement mon modem) et j'ai installé Slitaz sur une carte SDHC (sdb). Pas de problème pour l'installation, mais impossible de démarrer (kernel panic).

   J'ai alors décidé de l'installer en Live-USB sur cette même carte SDHC, que j'ai placée pour l'installation dans un lecteur de carte USB. Pas de problème, ni pour l'installation, ni pour le démarrage, même une fois la carte placée dans le lecteur de carte du EeePC. La seule contrainte, appuyer sur la touche Escape au démarrage pour choisir la carte.

   Cette solution est presque parfaite, quoique un peu moins rapide au démarrage qu'une installation sur le disque (sda), la configuration reste enregistrée ainsi que tous les logiciels installés. Toutefois, même après ce que j'ai précisé au début de ce message et aussi l'installation, probablement inutile, du package non free "get-softmodem-driver"), il persiste toujours le problème de reconnaissance de mon modem, qui me turlupine.

   Si quelqu'un peut me donner la solution, je dormirais mieux la nuit ;-) Merci d'avance.

   Posted 12 years ago #
2. 

   Anonymous
   

   offline

   Unregistered

   Bonjour,

   un truc très basique, as-tu lancé le fichier sous l'utilisateur Root? (mdp root sous une slitaz fraichement installée)

   Posted 12 years ago #
3. 

   familypm
   

   offline

   Member

   Bonsoir,

   J'ai effectivement exécuté la commande en ayant soin d'écrire su au début.

   Posted 12 years ago #
4. 

   domcox
   

   offline

   Administrator

   Bonsoir,

   Le firmware a lui tout seul ne fera pas fonctionner le modem.

   Je ne connais pas ce modem, mais apparemment vu la doc, il semblerait que ce soit un modem USB. Il est apparemment pris en charge par le kernel avec le module cdc-acm.

   Essaie en chargeant ce module, il fait partie du paquet de base linux (dans /lib/modules/2.6.37-slitaz/kernel/drivers/usb/class/cdc-acm.ko.gz)
   # modprobe cdc-acm

   Puis voir si le modem fonctionne.

   Posted 12 years ago #
5. 

   familypm
   

   offline

   Member

   Bonjour,

   Il y a du mieux, un voyant du modem s'allume et il est bien reconnu dans les "Informations système - USB Devices" comme Modem USB. Sa marque et son modèle sont bien précisés.

   En revanche, dans la configuration du réseau, il ne figure pas dans le matériel utilisable.
   Peut-être faut-il installer un package pour la prise en charge d'une connexion PPP ? Il y a déjà les trois packages PPP d'installés.

   Posted 12 years ago #
6. 

   domcox
   

   offline

   Administrator

   Il devrait exister un nouveau device: /dev/ttyACM0
   Pour le debugging, voir http://lxr.linux.no/#linux+v2.6.38/Documentation/usb/acm.txt

   PPP devrait le prendre en charge, wvdial est pas mal non plus.
   Pour un HOWTOs de wvdial http://library.kiwix.org:4207/A/wvdial.html

   Posted 12 years ago #
7. 

   familypm
   

   offline

   Member

   Bonsoir,

   Il n'y a pas de nouveau device /dev/ttyACM0

   J'avais trouvé aussi ceci :
   "Pour les modems USB, créer un lien avec ln -s /dev/usb/ttyACM0 /dev/modem, puis modprobe acm"
   sur cette page : http://guides-info.org/linux/linux_survie/04_peripheriques_linux.php#win_modem

   J'ai ensuite installé le package wvdial, mais il n'y a pas de fichier /etc/wvdial.conf

   Le voyant d'alimentation du modem (PWR) n'est pas allumé.

   C'est assez surprenant, car ce modem est compatible avec Linux à partir du noyeau 2.4.20 : http://www.usr.com/support/5637/5637-fr-ug/index.html
   Je n'ai d'ailleurs aucun problème sous Xandros avec ce modem sur ce même EeePC.

   Posted 12 years ago #
8. 

   domcox
   

   offline

   Administrator

   Qu'est ce qu'il y a dans /proc/bus/usb/devices? est-ce que cela correspond à http://lxr.linux.no/#linux+v2.6.38/Documentation/usb/acm.txt ?

   Ces 3 lignes sont importantes, si Cls=ff(vend.), pas de chance, le périphérique est doté d'une interface spécifique:
   
D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm


   Quel est le contenu de /var/log/messages? Est-ce qu'il ressemble à ceci?
   
usb.c: USB new device connect, assigned device number 2
usb.c: kmalloc IF c7691fa0, numif 1
usb.c: kmalloc IF c7b5f3e0, numif 2
usb.c: skipped 4 class/vendor specific interface descriptors
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
usb.c: USB device number 2 default language ID 0x409
Manufacturer: 3Com Inc.
Product: 3Com U.S. Robotics Pro ISDN TA
SerialNumber: UFT53A49BVT7
acm.c: probing config 1
acm.c: probing config 2
ttyACM0: USB ACM device
acm.c: acm_control_msg: rq: 0x22 val: 0x0 len: 0x0 result: 0
acm.c: acm_control_msg: rq: 0x20 val: 0x0 len: 0x7 result: 7
usb.c: acm driver claimed interface c7b5f3e0
usb.c: acm driver claimed interface c7b5f3f8
usb.c: acm driver claimed interface c7691fa0


   Posted 12 years ago #
9. 

   familypm
   

   offline

   Member

   Bonjour,

   Dans /proc/bus/usb/devices il y a ce paragraphe :

   T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
   D: Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
   P: Vendor=0baf ProdID=0303 Rev= 2.00
   S: Manufacturer=U.S.Robotics
   S: Product=USB Modem
   S: SerialNumber=0000002
   C:* #Ifs= 2 Cfg#= 2 Atr=80 MxPwr=360mA
   I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=(none)
   E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=64ms
   I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
   E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
   E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

   et /var/log/messages contient ceci :

   Apr 27 07:20:03 (none) user.info kernel: ACPI: Thermal Zone [TZ00] (55 C)
   Apr 27 07:20:03 (none) user.info kernel: isapnp: Scanning for PnP cards...
   Apr 27 07:20:03 (none) user.info kernel: isapnp: No Plug & Play device found
   Apr 27 07:20:03 (none) user.info kernel: ACPI: Battery Slot [BAT0] (battery absent)
   Apr 27 07:20:03 (none) user.info kernel: Non-volatile memory driver v1.3
   Apr 27 07:20:03 (none) user.notice kernel: intel_rng: FWH not detected
   Apr 27 07:20:03 (none) user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
   Apr 27 07:20:03 (none) user.info kernel: brd: module loaded
   Apr 27 07:20:03 (none) user.info kernel: loop: module loaded
   Apr 27 07:20:03 (none) user.info kernel: Uniform Multi-Platform E-IDE driver
   Apr 27 07:20:03 (none) user.info kernel: ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
   Apr 27 07:20:03 (none) user.info kernel: ide-gd driver 1.18
   Apr 27 07:20:03 (none) user.info kernel: ide-cd driver 5.00
   Apr 27 07:20:03 (none) user.warn kernel: Driver 'sd' needs updating - please use bus_type methods
   Apr 27 07:20:03 (none) user.warn kernel: Driver 'sr' needs updating - please use bus_type methods
   Apr 27 07:20:03 (none) user.debug kernel: ahci 0000:00:1f.2: version 3.0
   Apr 27 07:20:03 (none) user.info kernel: ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
   Apr 27 07:20:03 (none) user.info kernel: ahci 0000:00:1f.2: PCI INT B disabled
   Apr 27 07:20:03 (none) user.warn kernel: ahci: probe of 0000:00:1f.2 failed with error -22
   Apr 27 07:20:03 (none) user.debug kernel: ata_piix 0000:00:1f.2: version 2.13
   Apr 27 07:20:03 (none) user.info kernel: ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
   Apr 27 07:20:03 (none) user.info kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
   Apr 27 07:20:03 (none) user.debug kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
   Apr 27 07:20:03 (none) user.info kernel: scsi0 : ata_piix
   Apr 27 07:20:03 (none) user.info kernel: scsi1 : ata_piix
   Apr 27 07:20:03 (none) user.info kernel: ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
   Apr 27 07:20:03 (none) user.info kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
   Apr 27 07:20:03 (none) user.info kernel: e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
   Apr 27 07:20:03 (none) user.info kernel: e1000e: Copyright (c) 1999-2008 Intel Corporation.
   Apr 27 07:20:03 (none) user.info kernel: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
   Apr 27 07:20:03 (none) user.info kernel: e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
   Apr 27 07:20:03 (none) user.info kernel: e100: Copyright(c) 1999-2006 Intel Corporation
   Apr 27 07:20:03 (none) user.info kernel: ThunderLAN driver v1.15a
   Apr 27 07:20:03 (none) user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
   Apr 27 07:20:03 (none) user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
   Apr 27 07:20:03 (none) user.info kernel: PPP generic driver version 2.4.2
   Apr 27 07:20:03 (none) user.info kernel: PPP Deflate Compression module registered
   Apr 27 07:20:03 (none) user.info kernel: PPP BSD Compression module registered
   Apr 27 07:20:03 (none) user.info kernel: PPP MPPE Compression module registered
   Apr 27 07:20:03 (none) user.info kernel: NET: Registered protocol family 24
   Apr 27 07:20:03 (none) user.info kernel: tun: Universal TUN/TAP device driver, 1.6
   Apr 27 07:20:03 (none) user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
   Apr 27 07:20:03 (none) user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
   Apr 27 07:20:03 (none) user.info kernel: winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
   Apr 27 07:20:03 (none) user.info kernel: http://www.scyld.com/network/drivers.html
   Apr 27 07:20:03 (none) user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
   Apr 27 07:20:03 (none) user.info kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
   Apr 27 07:20:03 (none) user.debug kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
   Apr 27 07:20:03 (none) user.info kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
   Apr 27 07:20:03 (none) user.info kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
   Apr 27 07:20:03 (none) user.info kernel: ehci_hcd 0000:00:1d.7: debug port 1
   Apr 27 07:20:03 (none) user.debug kernel: ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
   Apr 27 07:20:03 (none) user.info kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
   Apr 27 07:20:03 (none) user.info kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
   Apr 27 07:20:03 (none) user.info kernel: usb usb1: configuration #1 chosen from 1 choice
   Apr 27 07:20:03 (none) user.info kernel: hub 1-0:1.0: USB hub found
   Apr 27 07:20:03 (none) user.info kernel: hub 1-0:1.0: 8 ports detected
   Apr 27 07:20:03 (none) user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
   Apr 27 07:20:03 (none) user.info kernel: uhci_hcd: USB Universal Host Controller Interface driver
   Apr 27 07:20:03 (none) user.info kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
   Apr 27 07:20:03 (none) user.debug kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
   Apr 27 07:20:03 (none) user.info kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
   Apr 27 07:20:03 (none) user.info kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
   Apr 27 07:20:03 (none) user.info kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
   Apr 27 07:20:03 (none) user.info kernel: usb usb2: configuration #1 chosen from 1 choice
   Apr 27 07:20:03 (none) user.info kernel: hub 2-0:1.0: USB hub found
   Apr 27 07:20:03 (none) user.info kernel: hub 2-0:1.0: 2 ports detected
   Apr 27 07:20:03 (none) user.info kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
   Apr 27 07:20:03 (none) user.debug kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
   Apr 27 07:20:03 (none) user.info kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
   Apr 27 07:20:03 (none) user.info kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
   Apr 27 07:20:03 (none) user.info kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
   Apr 27 07:20:03 (none) user.info kernel: usb usb3: configuration #1 chosen from 1 choice
   Apr 27 07:20:03 (none) user.info kernel: hub 3-0:1.0: USB hub found
   Apr 27 07:20:03 (none) user.info kernel: hub 3-0:1.0: 2 ports detected
   Apr 27 07:20:03 (none) user.info kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
   Apr 27 07:20:03 (none) user.debug kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
   Apr 27 07:20:03 (none) user.info kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
   Apr 27 07:20:03 (none) user.info kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
   Apr 27 07:20:03 (none) user.info kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
   Apr 27 07:20:03 (none) user.info kernel: usb usb4: configuration #1 chosen from 1 choice
   Apr 27 07:20:03 (none) user.info kernel: hub 4-0:1.0: USB hub found
   Apr 27 07:20:03 (none) user.info kernel: hub 4-0:1.0: 2 ports detected
   Apr 27 07:20:03 (none) user.info kernel: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
   Apr 27 07:20:03 (none) user.debug kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
   Apr 27 07:20:03 (none) user.info kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
   Apr 27 07:20:03 (none) user.info kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
   Apr 27 07:20:03 (none) user.info kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
   Apr 27 07:20:03 (none) user.info kernel: usb usb5: configuration #1 chosen from 1 choice
   Apr 27 07:20:03 (none) user.info kernel: hub 5-0:1.0: USB hub found
   Apr 27 07:20:03 (none) user.info kernel: hub 5-0:1.0: 2 ports detected
   Apr 27 07:20:03 (none) user.info kernel: Initializing USB Mass Storage driver...
   Apr 27 07:20:03 (none) user.info kernel: usbcore: registered new interface driver usb-storage
   Apr 27 07:20:03 (none) user.info kernel: USB Mass Storage support registered.
   Apr 27 07:20:03 (none) user.info kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
   Apr 27 07:20:03 (none) user.info kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
   Apr 27 07:20:03 (none) user.info kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
   Apr 27 07:20:03 (none) user.info kernel: mice: PS/2 mouse device common for all mice
   Apr 27 07:20:03 (none) user.info kernel: input: PC Speaker as /devices/platform/pcspkr/input/input0
   Apr 27 07:20:03 (none) user.info kernel: cpuidle: using governor ladder
   Apr 27 07:20:03 (none) user.info kernel: cpuidle: using governor menu
   Apr 27 07:20:03 (none) user.info kernel: usbcore: registered new interface driver hiddev
   Apr 27 07:20:03 (none) user.info kernel: usbcore: registered new interface driver usbhid
   Apr 27 07:20:03 (none) user.info kernel: usbhid: v2.6:USB HID core driver
   Apr 27 07:20:03 (none) user.info kernel: TCP cubic registered
   Apr 27 07:20:03 (none) user.info kernel: NET: Registered protocol family 17
   Apr 27 07:20:03 (none) user.info kernel: NET: Registered protocol family 15
   Apr 27 07:20:03 (none) user.info kernel: RPC: Registered udp transport module.
   Apr 27 07:20:03 (none) user.info kernel: RPC: Registered tcp transport module.
   Apr 27 07:20:03 (none) user.info kernel: Using IPI No-Shortcut mode
   Apr 27 07:20:03 (none) user.info kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
   Apr 27 07:20:03 (none) user.info kernel: ata2.00: CFA: SILICONMOTION SM223AC, , max UDMA/66
   Apr 27 07:20:03 (none) user.info kernel: ata2.00: 7815024 sectors, multi 0: LBA
   Apr 27 07:20:03 (none) user.info kernel: ata2.00: configured for UDMA/66
   Apr 27 07:20:03 (none) user.notice kernel: scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ: 0 ANSI: 5
   Apr 27 07:20:03 (none) user.notice kernel: sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors: (4.00 GB/3.72 GiB)
   Apr 27 07:20:03 (none) user.notice kernel: sd 1:0:0:0: [sda] Write Protect is off
   Apr 27 07:20:03 (none) user.debug kernel: sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
   Apr 27 07:20:03 (none) user.notice kernel: sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
   Apr 27 07:20:03 (none) user.info kernel: sda:<5>sd 1:0:0:0: Attached scsi generic sg0 type 0
   Apr 27 07:20:03 (none) user.warn kernel: sda1 sda2 sda3 sda4
   Apr 27 07:20:03 (none) user.notice kernel: sd 1:0:0:0: [sda] Attached SCSI disk
   Apr 27 07:20:03 (none) user.info kernel: Freeing unused kernel memory: 328k freed
   Apr 27 07:20:03 (none) user.info kernel: usb 1-2: new high speed USB device using ehci_hcd and address 2
   Apr 27 07:20:03 (none) user.warn kernel: Clocksource tsc unstable (delta = -133904155 ns)
   Apr 27 07:20:03 (none) user.info kernel: usb 1-2: configuration #2 chosen from 1 choice
   Apr 27 07:20:03 (none) user.info kernel: usb 1-5: new high speed USB device using ehci_hcd and address 4
   Apr 27 07:20:03 (none) user.info kernel: usb 1-5: configuration #1 chosen from 1 choice
   Apr 27 07:20:03 (none) user.info kernel: scsi2 : SCSI emulation for USB Mass Storage devices
   Apr 27 07:20:03 (none) user.debug kernel: usb-storage: device found at 4
   Apr 27 07:20:03 (none) user.debug kernel: usb-storage: waiting for device to settle before scanning
   Apr 27 07:20:03 (none) user.info kernel: Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04753/0x200000
   Apr 27 07:20:03 (none) user.info kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
   Apr 27 07:20:03 (none) user.info kernel: usb 3-2: new low speed USB device using uhci_hcd and address 2
   Apr 27 07:20:03 (none) user.info kernel: usb 3-2: configuration #1 chosen from 1 choice
   Apr 27 07:20:03 (none) user.info kernel: input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3
   Apr 27 07:20:03 (none) user.info kernel: generic-usb 0003:13EE:0003.0001: input: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:1d.1-2/input0
   Apr 27 07:20:03 (none) user.info kernel: udev: starting version 150
   Apr 27 07:20:04 (none) user.info kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
   Apr 27 07:20:04 (none) user.debug kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
   Apr 27 07:20:04 (none) user.info kernel: cfg80211: Using static regulatory domain info
   Apr 27 07:20:04 (none) user.info kernel: cfg80211: Regulatory domain: US
   Apr 27 07:20:04 (none) user.info kernel: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
   Apr 27 07:20:04 (none) user.info kernel: (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
   Apr 27 07:20:04 (none) user.info kernel: (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
   Apr 27 07:20:04 (none) user.info kernel: (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
   Apr 27 07:20:04 (none) user.info kernel: (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
   Apr 27 07:20:04 (none) user.info kernel: (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
   Apr 27 07:20:04 (none) user.info kernel: (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
   Apr 27 07:20:04 (none) user.info kernel: cfg80211: Calling CRDA for country: US
   Apr 27 07:20:04 (none) user.info kernel: ath5k 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
   Apr 27 07:20:04 (none) user.debug kernel: ath5k 0000:01:00.0: setting latency timer to 64
   Apr 27 07:20:04 (none) user.info kernel: ath5k 0000:01:00.0: registered as 'phy0'
   Apr 27 07:20:04 (none) user.debug kernel: phy0: Selected rate control algorithm 'minstrel'
   Apr 27 07:20:04 (none) user.info kernel: ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
   Apr 27 07:20:04 (none) user.info kernel: Atheros(R) L2 Ethernet Driver - version 2.2.3
   Apr 27 07:20:04 (none) user.info kernel: Copyright (c) 2007 Atheros Corporation.
   Apr 27 07:20:04 (none) user.info kernel: atl2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
   Apr 27 07:20:04 (none) user.debug kernel: atl2 0000:03:00.0: setting latency timer to 64
   Apr 27 07:20:07 (none) user.notice kernel: scsi 2:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0
   Apr 27 07:20:07 (none) user.notice kernel: sd 2:0:0:0: Attached scsi generic sg1 type 0
   Apr 27 07:20:07 (none) user.debug kernel: usb-storage: device scan complete
   Apr 27 07:20:07 (none) user.notice kernel: sd 2:0:0:0: [sdb] 15122432 512-byte hardware sectors: (7.74 GB/7.21 GiB)
   Apr 27 07:20:07 (none) user.notice kernel: sd 2:0:0:0: [sdb] Write Protect is off
   Apr 27 07:20:07 (none) user.debug kernel: sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
   Apr 27 07:20:07 (none) user.err kernel: sd 2:0:0:0: [sdb] Assuming drive cache: write through
   Apr 27 07:20:07 (none) user.err kernel: sd 2:0:0:0: [sdb] Assuming drive cache: write through
   Apr 27 07:20:07 (none) user.info kernel: sdb:
   Apr 27 07:20:07 (none) user.info kernel: sdb1
   Apr 27 07:20:07 (none) user.notice kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk
   Apr 27 07:20:12 (none) user.err kernel: EXT3-fs: Unrecognized mount option "uid=1000" or missing value
   Apr 27 07:20:12 (none) user.warn kernel: XFS: unknown mount option [uid].
   Apr 27 07:20:12 (none) user.info kernel: kjournald starting. Commit interval 5 seconds
   Apr 27 07:20:12 (none) user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
   Apr 27 07:20:12 (none) user.info kernel: EXT3 FS on sdb1, internal journal
   Apr 27 07:20:12 (none) user.info kernel: EXT3-fs: recovery complete.
   Apr 27 07:20:12 (none) user.info kernel: EXT3-fs: mounted filesystem with writeback data mode.
   Apr 27 07:20:12 (none) user.info kernel: atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
   Apr 27 07:20:13 (none) user.warn kernel: mtrr: base(0xd0000000) is not aligned on a size(0x7b0000) boundary
   Apr 27 07:26:14 (none) user.debug kernel: mtrr: no MTRR for d0000000,7b0000 found
   Apr 27 07:26:15 (none) user.warn kernel: mtrr: base(0xd0000000) is not aligned on a size(0x7b0000) boundary

   Posted 12 years ago #
10. 

    familypm
    

    offline

    Member

    Re-bonjour,

    Je reprends tranquillement de mon travail, il me semble assez clair qu'il s'agit d'un problème de drivers du modem non installés, il faudrait que je trouve comment les installer.

    Posted 12 years ago #
11. 

    familypm
    

    offline

    Member

    J'ai trouvé ceci sur le site de US Robotics :

    "Noyau Linux 2.4.20 ou ultérieur

    Vous avez besoin d'un pilote de modem USB (CDC ACM) compilé dans un noyau Linux 2.4.20 ou supérieur, ou d'un module téléchargeable pour votre noyau. L'installation du modem sous ces noyaux est entièrement automatique, à condition que le module Plug and Play de votre noyau soit activé (état par défaut). Il n'est pas nécessaire d'installer les pilotes présents sur le CD-ROM d'installation USRobotics."

    Comment vérifier que le module Plug and Play du noyau est activé ?

    Je chercherai en rentrant chez moi ce soir.

    Posted 12 years ago #
12. 

    domcox
    

    offline

    Administrator

    Il manque peut-être tout simplement le device node.

    Je ferais bien comme cela (sous root) :
    

    # modprobe cdc-acm<br />
    # mknod /dev/usb/ttyACM0 c 166 0

    Que donne la commande lsusb?
    # lsusb
    Est-ce qu'une ligne semblable à celle suivante est présente?
    

    Bus 001 Device 003: ID 0baf:0303 U.S. Robotics

    Posted 12 years ago #
13. 

    familypm
    

    offline

    Member

    Bonsoir,

    J'ai exécuté

    root@slitaz:~## modprobe cdc-acm

    puis

    root@slitaz:~## mknod /dev/usb/ttyACM0 c 166 0

    Le résultat :

    mknod : /dev/usb/ttyACM0: le fichier existe déjà.

    J'ai vérifié, il a été effectivement créé à l'heure de la commande.

    J'ai ensuite exécuté :

    root@slitaz:~# lsusb

    Le résultat :

    -sh: lsusb: not found

    Posted 12 years ago #
14. 

    familypm
    

    offline

    Member

    J'ai vérifié le fichier /proc/bus/usb/devices le driver cdc_acm est maintenant bien installé :

    T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
    D: Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
    P: Vendor=0baf ProdID=0303 Rev= 2.00
    S: Manufacturer=U.S.Robotics
    S: Product=USB Modem
    S: SerialNumber=0000002
    C:* #Ifs= 2 Cfg#= 2 Atr=80 MxPwr=360mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=cdc_acm
    E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=64ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
    E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

    Posted 12 years ago #
15. 

    familypm
    

    offline

    Member

    Je viens de tester, pas de connexion avec le modem US Robotics.
    Il est tard, je me lève tôt, je vais me coucher.
    Merci pour ton aide, à demain.

    Posted 12 years ago #

RSS feed for this topic

Reply »

You must log in to post.