SliTaz Forum

libhdf5_hl.100.so

(3 posts) (2 voices)

• Started 1 month ago by Bruno_66
• Latest reply from Bruno_66
• This topic is resolved

Tags:

• libhdf5_hl.100.so
• libraries
• scilab

1. 

   Bruno_66
   

   offline

   Member

   I’m a vintage (60-year-old) Linux enthusiast, passionate about science and technology. Recently, I found a nice piece of hardware in the trash — a Compaq 2510p (HP branded, 32-bit). Oh my! People must be out of their minds... I rescued it from the rubbish bin, discovered it had 2 GB of RAM, cleaned it up, and successfully installed the rolling 32-bit SliTaz distro.

   I also installed QCAD, Python3, GIMP, and a few others with great satisfaction. However, I ran into a small issue: I installed Scilab, but it seems there’s a mismatch between the current HDF5 version and the one required by the software (libhdf5_hl.100.so). I tried to fix it using tazpkg, but no luck so far.

   Please let me know if anyone has already solved this issue somehow.

   Thank you in advance,
   Bruno (Italy)

   Posted 1 month ago #
2. 

   Ceel
   

   offline

   Administrator

   Hello,

   I guess hdf5 is installed.
   Maybe creating a symlink could help. From a root terminal
   

   cd /usr/lib
   ln -s libhdf5_hl.so libhdf5_hl.100.so

   Posted 1 month ago #
3. 

   Bruno_66
   

   offline

   Member

   Hello Ceel, thank you for your help. It works. I had to do it with libhdf.so.103 too. Now scilab without GUI starts. Thak you again. Bruno

   Posted 1 month ago #

RSS feed for this topic

Reply

You must log in to post.