resolved
xaropebr
offlineMember
atualizaram o mesa no slitaz 5 para "mesa-9.1.3.tazpkg" dai pesquisei no /cooking e nao achei o pacote
sis para minha vga "SIS M650 32mb" por causa disso nao tenho nem OpenGL e nem direct 3D...
se alguem tiver ou fazer um posta o link ai por favor.
obs: no Slitaz 4 tem o pacote "mesa-dri-sis-7.10.2.tazpkg" para o "mesa-7.10.2.tazpkg".
kultex
offlineKey Master
as far as I understand, Sis cards are no more supported by Mesa - http://www.mesa3d.org/systems.html
the support of those old grafic drivers went to fbdev - https://github.com/torvalds/linux/tree/master/drivers/video/fbdev/sis
fbdev is included in cooking - so it should run the fbdev driver automatic
kultex
offlineKey Master
fbdev should be working out of the box - you can check it by controling the file var/log/Xorg.0.log
if you are not hapy with fbdev, you can try to use the xorg sis driver with DRISWRAST GL renderer
you have to start the RC3 in consolemode by adding screen=text
http://doc.slitaz.org/en:handbook:livecd
then tazx and choose the sis video driver
maybe a look into this doc may help
http://doc.slitaz.org/en:guides:xorg-xvesa
I have one old computer with SIS but very little RAM - I think 256 MB and when I tested fbdev worked better - but this may is different, when you have more ram
xaropebr
offlineMember
in terminal
# tazx
xorg
V
sis
in terminal showme this
========================================
Installing pkg: xorg-server
Installing pkg: xorg-xf86-video-sis
X.Org X Server 1.12.4
Release Date: 2012-08-27
X Protocol Version 11, Revision 0
Build Operating System: SliTaz GNU/Linux
Current Operating System: Linux slitaz 3.2.71-slitaz #4 SMP Sat Oct 10 17:40:08 CEST 2015 i686
Kernel command line: root=/dev/sda3 quiet
Build Date: 19 September 2015 01:55:40AM
Current version of pixman: 0.32.6
Before reporting problems, check http://www.slitaz.org/
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.2.log", Time: Wed Dec 16 12:17:53 2015
List of video drivers:
sis
fbdev
vesa
(++) Using config file: "/root/xorg.conf.new"
(==) Using config directory: "/etc/X11/xorg.conf.d"
Backtrace:
0: Xorg (xorg_backtrace+0x46) [0x81712df]
1: Xorg (0x8048000+0x12c161) [0x8174161]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xffffe410]
Segmentation fault at address (nil)
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
Please consult the The X.Org Foundation support
at http://www.slitaz.org/
for help.
Please also check the log file at "/var/log/Xorg.2.log" for additional information.
Server terminated with error (1). Closing log file.
Aborted
Creating: /etc/X11/xorg.conf.d/40-Keyboard.conf[ Failed ]
root@slitaz:/home/tux#
(process:4355): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
==============================================
e agora ?
xaropebr
offlineMember
I give up, not can not turn on OpenGL on slitaz I tried on
slitaz 4
slitaz 5
slitaz weekly
I used the command
# tazx
but from an error and not active. I get back to puppy tahr 6.0.2 nopae that already comes with mesa and opengl drive is actived for my sis m650 32mb :(
my pc specs
AMD Duron 1200+ (1,2GHz)
512 DDR1 (400MHz)
SIS 65x/M650/740 PCI AGP 32MB (315 Series) [accept overclock max 64MB but need more RAM]
HD 160GB Sata > on IDE (using adapter)
Part 1 (NTFS) With XP
Part 2 (Linux-Swap)
Part 3 (Ext3) With Slitaz 5 rc3 (I had to use the grub4dos of the Puppy Linux 6 for him to recognize the slitaz and xp, why the bootloader of slitaz not recognize my xp not know why ...)
when someone solve it for me I go back to slitaz :/
kultex
offlineKey Master
thx az_ua - I did not check this
can you install it by hand
boot the iso in consol mode
wget http://cook.slitaz.org/undigest/cooker.cgi?download=mesa-dri-sis-7.10.2.tazpkg
wget http://cook.slitaz.org/undigest/cooker.cgi?download=xorg-xf86-video-sis-0.10.4.tazpkg
get root
tazpkg install xorg-xf86-video-sis-0.10.4.tazpkg
tazpkg install mesa-dri-sis-7.10.2.tazpkg
this should install also all depencies
and then
startx
xaropebr
offlineMember
Don't work show error message no screens found
i tried sis drive and fbdev return same erro...
====================================
#tazx
Installing pkg: xorg-server
Installing pkg: xorg-xf86-video-sis
X.Org X Server 1.12.4
Release Date: 2012-08-27
X Protocol Version 11, Revision 0
Build Operating System: SliTaz GNU/Linux
Current Operating System: Linux slitaz 3.2.71-slitaz #4 SMP Sat Oct 10 17:40:08 CEST 2015 i686
Kernel command line: root=/dev/sda3 quiet
Build Date: 19 September 2015 01:55:40AM
Current version of pixman: 0.32.6
Before reporting problems, check http://www.slitaz.org/
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.2.log", Time: Wed Dec 16 19:14:29 2015
List of video drivers:
sis
fbdev
vesa
(++) Using config file: "/root/xorg.conf.new"
(==) Using config directory: "/etc/X11/xorg.conf.d"
Backtrace:
0: Xorg (xorg_backtrace+0x46) [0x81712df]
1: Xorg (0x8048000+0x12c161) [0x8174161]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xffffe410]
Segmentation fault at address (nil)
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
Please consult the The X.Org Foundation support
at http://www.slitaz.org/
for help.
Please also check the log file at "/var/log/Xorg.2.log" for additional information.
Server terminated with error (1). Closing log file.
Aborted
Creating: /etc/X11/xorg.conf.d/40-Keyboard.conf[ Failed ]
root@slitaz:/home/tux#
(process:5720): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
=================================================
xaropebr
offlineMember
eu instalei os pacotes
do Slitaz 4.0
mesa-7.10.2
libglu-mesa-7.10.2
glew-1.5.8
mesa-demos-8.0.1
mesa-dri-7.10.2
mesa-dri-sis-7.10.2
e do cooking
xorg-rgb-1.0.4
xorg-7.4
depois no terminal
#tazx
primeira opção
escolhi o video-sis
deu o mesmo erro so que agora no hardinfo esta escrito "Software Rasterizer"
e no #glxinfo consta Direct Rendering: Yes
eu testei com o #glxgears apareceu as engrenagens normal....
so que o xorg nao esta instalado direito vou tentar converter o xorg do puppy tahr por que
ele reconhece no hardinfo o opengl como "galium 0.4 on softpipe"....
directrendering.jpg (114.5 KB, 1,431 downloads) 8 years old
kultex
offlineKey Master
congratulations
but it would be great, if you could test the new undigest packages, if mesa-dri-sis-7.10.2.tazpkg somehow works? - just try to install both packages on top of your working RC3
xaropebr
offlineMember
Ordem de instalacao dos pacotes:
mesa-7.10.2
libglu-mesa-7.10.2
glew-1.5.8
mesa-demos-8.0.1
mesa-dri-7.10.2
mesa-dri-sis-7.10.2
xorg-rgb-1.0.4
xorg-7.4
xorg-xf86-video-sis-0.10.7 <--it works
glibc-extra-samba-2.14.1
glibc-locale-2.14.1
glibc-dev-2.14.1
glibc-2.14.1
-------------------------------------------------------
Como ativar o drive:
Abra o PCManFM (como Root) e crie esse arquivo /root/xorg.conf.new
agora no Sakura Terminal:
# rm /etc/X11/xorg.conf.d/40-Keyboard.conf
# tazx
xorg (install or reconfigure Xorg)
sis driver
Installing pkg: xorg-server
Installing pkg: xorg-xf86-video-sis
/usr/bin/tazx: line 35: Xorg: not found
Creating: /etc/X11/xorg.conf.d/40-Keyboard.conf[ Done ]
root@slitaz:/home/tux#
(process:15476): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
------------------------------------------------------------------------------------------------------------
in hardinfo:
Resolution > 1280x1024
OpenGL Render > Software Rasterizer
X11 Vendor > (null)
------------------------------------------------------------------------------------------------------------
mesmo com xorg-7.4 instalado ta dando o erro Xorg: not found
alguem sabe como resolver ?
eu estou usando Slitaz Weekly 5 rc4 32bits
xaropebr
offlineMember
aeeeeeeeeee consegui ativar o 3d da sis trash :)
instalei quase tdos drivers msa e xorg do repo cooking -
sis_trash_3d_work.jpg (19 KB, 1,258 downloads) 8 years old You must log in to post.
