SliTaz Forum

network problem

(16 posts) (3 voices)

• Started 12 years ago by mido
• Latest reply from gdesilva
• This topic is not resolved

Tags:

No tags yet.

1. 

   mido
   

   offline

   Member

   i used slitaz live cds [ core-firefox-loram]. There is an internet connction[eth0]but midori and firefox can't access the internet and i have the error message [ hostname not resolved]. eth0 says it's receiving packets .
   I am in a dchp network

   Posted 12 years ago #
2. 

   mojo
   

   offline

   Key Master

   Open terminal:
   IF
   ping 8.8.8.8
   Works
   ping http://www.slitaz.org
   Fails

   Then the DNS servers which are assigned by your ISP's udhcpd server are not working.
   Your computer contacts the DNS server to get the i.p. address for a web site name query.

   The nslookup tool can be used to test the existing DNS server configuration or override by appending the i.p. address of an alternate DNS server.
   nslookup http://www.slitaz.org
   or to try google DNS
   nslookup http://www.slitaz.org 8.8.8.8

   On my machine google DNS replys with correct i.p. address for http://www.slitaz.org:
   root@slitaz:/home/tux# nslookup http://www.slitaz.org
   Server: 8.8.8.8 <= First DNS listed in /etc/resolv.conf
   Address 1: 8.8.8.8 google-public-dns-a.google.com

   Name: http://www.slitaz.org <= lookup address name query
   Address 1: 94.23.61.29 pangolin.pimentvert.com <= i.p. address with web server domain name

   The following edit will use google DNS servers instead of the DNS servers assigned by your i.s.p.

   su, password: root
   # leafpad /usr/share/udhcpc/default.script
   Add what's in bold:

   #!/bin/sh

   # udhcpc script edited by Tim Riker
   dns="8.8.8.8 8.8.4.4"

   [ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1
   ...

   leafpad=>File/Save/File/Quit
   Restart networking:
   # /etc/init.d/network.sh restart

   Rerun ping test

   Posted 12 years ago #
3. 

   mido
   

   offline

   Member

   Thanks for your help but it doesn't ping at all despite that eth0 says that it receives packets . i did what you said and it didn't work and it gave me that
   #tux@slitaz:~$ /etc/init.d/network.sh restart
   Stopping all interfaces
   ifconfig: SIOCSIFFLAGS: Permission denied
   ifconfig: SIOCGIFFLAGS: No such device
   Killing all daemons
   killall: can't kill pid 2064: Operation not permitted
   wlan0 No such device

   ifconfig: SIOCSIFFLAGS: Permission denied
   Starting udhcpc client on: eth0...
   udhcpc: socket: Operation not permitted
   sed: can't create temp file '/etc/lxpanel/default/panels/panelEO5yFk': Permission denied
   tux@slitaz:~$

   Posted 12 years ago #
4. 

   mojo
   

   offline

   Key Master

   @mido

   #tux@slitaz:~$ /etc/init.d/network.sh restart

   You have to be root user to stop|start|restart network.sh
   Commands preceded with # indicates you must be root
   tux@slitaz:~$ <=regular user
   su <=type
   Hit the Enter key
   Password: <= system requests root password
   root <=type or your root password if you changed it
   Hit the Enter key
   root@slitaz:/home/tux# <=now your root user

   If you still can't ping 8.8.8.8 open terminal,post output from commands:
   ls /sys/class/net
ifconfig
cat /etc/network.conf
lspci -nn | grep -i eth
uname -a

   Posted 12 years ago #
5. 

   mido
   

   offline

   Member

   i got these outputs
   ls /sys/class/net
   dummy0 eth0 lo

   ifconfig eth0 Link encap:Ethernet HWaddr 00:15:F2:BA:57:0F
   inet addr:192.168.77.246 Bcast:192.168.255.255 Mask:255.255.0.0
   UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
   RX packets:341 errors:0 dropped:0 overruns:0 frame:0
   TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
   collisions:0 txqueuelen:1000
   RX bytes:88154 (86.0 KiB) TX bytes:1552 (1.5 KiB)
   Interrupt:19 Base address:0xd000

   lo Link encap:Local Loopback
   inet addr:127.0.0.1 Mask:255.0.0.0
   UP LOOPBACK RUNNING MTU:16436 Metric:1
   RX packets:248 errors:0 dropped:0 overruns:0 frame:0
   TX packets:248 errors:0 dropped:0 overruns:0 carrier:0
   collisions:0 txqueuelen:0
   RX bytes:47546 (46.4 KiB) TX bytes:47546 (46.4 KiB)

   cat /etc/network.conf
   # /etc/network.conf: SliTaz system wide networking configuration.
   # Config file used by: /etc/init.d/network.sh
   #

   # Set default interface.
   INTERFACE="eth0"

   # Dynamic IP address.
   # Enable/disable DHCP client at boot time.
   DHCP="yes"

   # Static IP address.
   # Enable/disable static IP at boot time.
   STATIC="no"

   # Set IP address and netmask for a static IP.
   IP="192.168.0.6"
   NETMASK="255.255.255.0"

   # Set route gateway for a static IP.
   GATEWAY="192.168.0.1"

   # Set DNS server for a static IP.
   DNS_SERVER="192.168.0.1"

   # Wifi connection.
   # Enable/disable wireless connection at boot time.
   WIFI="no"

   # Wifi interface (iwconfig) and ESSID.
   WIFI_INTERFACE="wlan0"
   WIFI_ESSID="any"
   WIFI_MODE="managed"
   WIFI_KEY=""
   WIFI_KEY_TYPE="none"
   WPA_DRIVER=""
   WIFI_CHANNEL=""
   WIFI_IWCONFIG_ARGS=""

   lspci -nn | grep -i eth

   00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 90)
   root@slitaz:/home/tux#

   uname -a
   Linux slitaz 2.6.37-slitaz #2 SMP Wed Mar 7 10:36:39 CET 2012 i686 GNU/Linux
   root@slitaz:/home/tux#

   i'd like to say that i have only one adapter ethernet

   Posted 12 years ago #
6. 

   mojo
   

   offline

   Key Master

   The i.p. address assigned to eth0 inet addr:192.168.77.246 is not used on the internet,it is for Local Area Network only.
   Is this computer directly connected to a cable/dsl modem or is there a router between it and the modem?
   If your connected to a router that assigned the i.p. address can you ping the router ?
   Post output from this command:
   route

   Posted 12 years ago #
7. 

   mido
   

   offline

   Member

   there is a router . i managed to ping the router but the problem still exists "hostname not resolved"

   Kernel IP routing table
   Destination Gateway Genmask Flags Metric Ref Use Iface
   127.0.0.1 * 255.255.255.255 UH 0 0 0 lo
   192.168.0.0 * 255.255.0.0 U 0 0 0 eth0

   root@slitaz:/home/tux# ping 192.168.77.1

   PING 192.168.77.1 (192.168.77.1): 56 data bytes
   64 bytes from 192.168.77.1: seq=0 ttl=64 time=0.521 ms
   64 bytes from 192.168.77.1: seq=1 ttl=64 time=0.456 ms
   64 bytes from 192.168.77.1: seq=2 ttl=64 time=0.475 ms
   64 bytes from 192.168.77.1: seq=3 ttl=64 time=0.865 ms
   64 bytes from 192.168.77.1: seq=4 ttl=64 time=0.564 ms
   64 bytes from 192.168.77.1: seq=5 ttl=64 time=1.317 ms
   64 bytes from 192.168.77.1: seq=6 ttl=64 time=0.445 ms
   64 bytes from 192.168.77.1: seq=7 ttl=64 time=2.364 ms
   64 bytes from 192.168.77.1: seq=8 ttl=64 time=0.580 ms
   64 bytes from 192.168.77.1: seq=9 ttl=64 time=0.520 ms
   64 bytes from 192.168.77.1: seq=10 ttl=64 time=2.214 ms
   64 bytes from 192.168.77.1: seq=11 ttl=64 time=0.472 ms
   64 bytes from 192.168.77.1: seq=12 ttl=64 time=0.491 ms

   Posted 12 years ago #
8. 

   mojo
   

   offline

   Key Master

   Your output of route has no default gateway which should be the router i.p. (192.168.77.1)
   The gateway is the LAN i.p. of the computer or router that provides access to the internet or another network.
   My slitaz(192.168.1.2) is connected to a wifi router(192.168.1.1) which connects to the cable modem(internet).

   Output of route:
   tux@slitaz:~$ route
   Kernel IP routing table
   Destination Gateway Genmask Flags Metric Ref Use Iface
   default 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0
   127.0.0.1 * 255.255.255.255 UH 0 0 0 lo
   192.168.1.0 * 255.255.255.0 U 0 0 0 wlan0

   The router's dhcpd is supposed to configure the clients gateway,DNS,mask,broadcast in addition to assigning the i.p. address.
   I would power off/on the router to reboot it, then restart network.sh

   Posted 12 years ago #
9. 

   gdesilva
   

   offline

   Member

   Also, worth checking the dhcp server settings in your router....for example if you are using a more advanced router you are expected to provide all values, like the default gateway, for the dhcp server process running on the router. Perhaps it will be useful to give more details of your network and make and model of the router you are using.

   Posted 12 years ago #
10. 

    mido
    

    offline

    Member

    thanks for your help but the problem still exists.i can access the internet in windows but not in siltaz.In siltaz I can ping the dhcp server 192.168.77.1 but i can't ping the default gateway 3.3.3.3 and i can't ping any other site.The machine identifies dns servers .
    siltaz network begins with wlan which is idle and i change it to eth0 and it receives packets but doesn't access the internet

    Posted 12 years ago #
11. 

    mojo
    

    offline

    Key Master

    Figure out the network configuration of windows which connects to the internet and you will figure out how to connect slitaz.

    Posted 12 years ago #
12. 

    mido
    

    offline

    Member

    ok the error message is Error - http://scn.slitaz.org/

    The page 'http://scn.slitaz.org/' couldn't be loaded.

    Cannot resolve hostname (scn.slitaz.org)
    and these are the outputs of internect connection in slitaz and i don't know what the problem is.

    Interface Name Status IP Address Scan ports
    eth0 Ethernet connected 192.168.77.246
    lo Loopback connected 127.0.0.1
    Hosts

    127.0.0.1 localhost slitaz tazpanel
    Edit hosts
    Hostname

    Output of ifconfig

    eth0 Link encap:Ethernet HWaddr 00:15:F2:BA:57:0F
    inet addr:192.168.77.246 Bcast:192.168.255.255 Mask:255.255.0.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:16 errors:0 dropped:0 overruns:0 frame:0
    TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:2453 (2.3 KiB) TX bytes:1552 (1.5 KiB)
    Interrupt:19 Base address:0xd000

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:372 errors:0 dropped:0 overruns:0 frame:0
    TX packets:372 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:84592 (82.6 KiB) TX bytes:84592 (82.6 KiB)
    Routing table

    Kernel IP routing table
    Destination Gateway Genmask Flags Metric Ref Use Iface
    127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 lo
    192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
    Domain name resolution

    nameserver 4.2.2.5
    nameserver 4.2.2.6
    ARP table

    ? (192.168.77.1) at 00:0c:42:e6:a6:6f [ether] on eth0
    IP Connections

    Active Internet connections (servers and established)
    Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
    tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1799/httpd
    tcp 0 0 0.0.0.0:6000 0.0.0.0:* LISTEN 1787/Xorg
    tcp 0 0 0.0.0.0:82 0.0.0.0:* LISTEN 1384/httpd
    tcp 0 0 127.0.0.1:82 127.0.0.1:39513 TIME_WAIT -
    tcp 0 0 127.0.0.1:82 127.0.0.1:39516 ESTABLISHED 2318/httpd
    tcp 0 0 127.0.0.1:82 127.0.0.1:39440 TIME_WAIT -
    tcp 0 0 127.0.0.1:82 127.0.0.1:39515 TIME_WAIT -
    tcp 0 0 127.0.0.1:39516 127.0.0.1:82 ESTABLISHED 1898/tazweb
    tcp 0 0 127.0.0.1:82 127.0.0.1:39514 TIME_WAIT -

    Posted 12 years ago #
13. 

    mojo
    

    offline

    Key Master

    i can access the internet in windows but not in siltaz

    If a windows computer running on the same network connects to the internet you should be able to copy the windows network configuration to slitaz so it connects to internet from the same network.
    Windows: paste the output from ipconfig /all into your Reply
    start/run
    type cmd in run box
    click ok button opens windows terminal
    In terminal type:
    ipconfig /all
    Hit the Enter key
    Place the mouse cursor in the terminal window,left click mouse button
    Right click mouse choose Select All from menu
    Left click with mouse cursor in Slitaz forum Reply/Post: box
    Right click mouse choose Paste

    Posted 12 years ago #
14. 

    mido
    

    offline

    Member

    This what i got

    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.

    C:\Documents and Settings\abo>ipconfig /all

    Windows IP Configuration

    Host Name . . . . . . . . . . . . : abdo
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Unknown
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No

    Ethernet adapter Local Area Connection 2:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : SiS 900-Based PCI Fast Ethernet Adap
    ter
    Physical Address. . . . . . . . . : 00-15-F2-BA-57-0F
    Dhcp Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    IP Address. . . . . . . . . . . . : 192.168.77.246
    Subnet Mask . . . . . . . . . . . : 255.255.255.255
    Default Gateway . . . . . . . . . : 3.3.3.3
    DHCP Server . . . . . . . . . . . : 192.168.77.1
    DNS Servers . . . . . . . . . . . : 4.2.2.5
    4.2.2.6
    Lease Obtained. . . . . . . . . . : Thursday, February 07, 2013 8:07:52
    PM
    Lease Expires . . . . . . . . . . : Thursday, February 07, 2013 9:07:52
    PM

    C:\Documents and Settings\abo>

    Posted 12 years ago #
15. 

    mojo
    

    offline

    Key Master

    Configure a static connection using the windows configuration.
    Boot into slitaz,open terminal,su,password: root
    # leafpad /etc/network.conf
    Configure network.conf like this:

    # /etc/network.conf: SliTaz system wide networking configuration.
    # Config file used by: /etc/init.d/network.sh
    #

    # Set default interface.
    INTERFACE="eth0"

    # Dynamic IP address.
    # Enable/disable DHCP client at boot time.
    DHCP="no"

    # Static IP address.
    # Enable/disable static IP at boot time.
    STATIC="yes"

    # Set IP address and netmask for a static IP.
    IP="192.168.77.246"
    NETMASK="255.255.255.255"

    # Set route gateway for a static IP.
    GATEWAY="3.3.3.3"

    # Set DNS server for a static IP.
    DNS_SERVER="4.2.2.5 4.2.2.6"

    # Wifi connection.
    # Enable/disable wireless connection at boot time.
    WIFI="no"

    # Wifi interface (iwconfig) and ESSID.
    WIFI_INTERFACE=""
    WIFI_ESSID=""
    WIFI_AP=""
    WIFI_MODE="managed"
    WIFI_KEY=""
    WIFI_KEY_TYPE="any"
    WPA_DRIVER=""
    WIFI_CHANNEL=""
    WIFI_IWCONFIG_ARGS=""

    leafpad=> File/Save/File/Quit
    Restart networking:
    # /etc/init.d/network.sh stop
# /etc/init.d/network.sh start

    Posted 12 years ago #

RSS feed for this topic

Reply »

You must log in to post.