Hi shann, hi gibor,
today, I tried the mentioned routines above. But unfortunately there is no success at all.
The rtl8723bs cannot be loaded. I don't know why. After installing the linux-staging, which you provided above and after trying modprobe it says:
root@slitaz:/home/tux# modprobe r8723bs
modprobe: FATAL: Module r8723bs not found in directory /lib/modules/5.10.238-slitaz64
root@slitaz:/home/tux# modprobe rt8723bs
modprobe: FATAL: Module rt8723bs not found in directory /lib/modules/5.10.238-slitaz64
root@slitaz:/home/tux# modprobe rtl8723bs
modprobe: FATAL: Module rtl8723bs not found in directory /lib/modules/5.10.238-slitaz64
I tried several names and I couldn't find the module in the library.
The system doesn't recognize my internal emmc flash-card neither the mmc micro-sd card slot.
About the "freezes". It's not really freezing, It's more like a kind of falling asleep. When I work on the desktop by typing on the keypad and/or move the mouse, it doesn't falling asleep. Just when there is a short break, between the actions. As I said, it reacts immediately again when I press any key at the keypad. At this moment it doesn't recognizes the touchpad.
the dmesg commands show:
root@slitaz:/home/tux# dmesg > dmesg_run
root@slitaz:/home/tux# dmesg -c
ACPI: XSDT 0x000000007CDCF188 0000CC (v01 INSYDE INSYDE 00000003 01000013)
ACPI: FACP 0x000000007CDF0000 00010C (v05 INSYDE INSYDE 00000003 ACPI 00040000)
ACPI: DSDT 0x000000007CDDC000 00EF44 (v02 INSYDE INSYDE 00000003 ACPI 00040000)
ACPI: UEFI 0x000000007CDF5000 000236 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
ACPI: MSDM 0x000000007CDF4000 000055 (v03 INSYDE INSYDE 00000001 ACPI 00040000)
ACPI: UEFI 0x000000007CDF3000 000042 (v01 INSYDE INSYDE 00000000 ACPI 00040000)
ACPI: OEM0 0x000000007CDF2000 000084 (v05 INSYDE INSYDE 00000003 ACPI 00040000)
ACPI: DBG2 0x000000007CDF1000 000072 (v00 INSYDE INSYDE 00000003 ACPI 00040000)
ACPI: HPET 0x000000007CDEF000 000038 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
ACPI: LPIT 0x000000007CDEE000 000104 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
ACPI: APIC 0x000000007CDED000 00006C (v03 INSYDE INSYDE 00000003 ACPI 00040000)
ACPI: MCFG 0x000000007CDEC000 00003C (v01 INSYDE INSYDE 00000003 ACPI 00040000)
ACPI: SLIC 0x000000007CDEB000 000176 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
ACPI: SSDT 0x000000007CDD9000 0024BD (v01 INSYDE DptfTab 00000003 ACPI 00040000)
ACPI: SSDT 0x000000007CDD8000 0005DA (v01 INSYDE CpuDptf 00000003 ACPI 00040000)
ACPI: SSDT 0x000000007CDD7000 000058 (v01 INSYDE LowPwrM 00000003 ACPI 00040000)
ACPI: SSDT 0x000000007CDD6000 0000FF (v01 INSYDE SoCDptf 00000003 ACPI 00040000)
ACPI: SSDT 0x000000007CDD5000 000763 (v01 INSYDE CpuPm 00003000 ACPI 00040000)
ACPI: SSDT 0x000000007CDD4000 000290 (v01 INSYDE Cpu0Tst 00003000 ACPI 00040000)
ACPI: SSDT 0x000000007CDD3000 00017A (v01 INSYDE ApTst 00003000 ACPI 00040000)
ACPI: FPDT 0x000000007CDD1000 000044 (v01 INSYDE INSYDE 00000002 ACPI 00040000)
ACPI: CSRT 0x000000007CDD0000 00014C (v00 INSYDE INSYDE 00000005 ACPI 00040000)
ACPI: BGRT 0x000000007CDD2000 000038 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
ACPI: Reserving FACP table memory at [mem 0x7cdf0000-0x7cdf010b]
ACPI: Reserving DSDT table memory at [mem 0x7cddc000-0x7cdeaf43]
ACPI: Reserving UEFI table memory at [mem 0x7cdf5000-0x7cdf5235]
ACPI: Reserving MSDM table memory at [mem 0x7cdf4000-0x7cdf4054]
ACPI: Reserving UEFI table memory at [mem 0x7cdf3000-0x7cdf3041]
ACPI: Reserving OEM0 table memory at [mem 0x7cdf2000-0x7cdf2083]
ACPI: Reserving DBG2 table memory at [mem 0x7cdf1000-0x7cdf1071]
ACPI: Reserving HPET table memory at [mem 0x7cdef000-0x7cdef037]
ACPI: Reserving LPIT table memory at [mem 0x7cdee000-0x7cdee103]
ACPI: Reserving APIC table memory at [mem 0x7cded000-0x7cded06b]
ACPI: Reserving MCFG table memory at [mem 0x7cdec000-0x7cdec03b]
ACPI: Reserving SLIC table memory at [mem 0x7cdeb000-0x7cdeb175]
ACPI: Reserving SSDT table memory at [mem 0x7cdd9000-0x7cddb4bc]
ACPI: Reserving SSDT table memory at [mem 0x7cdd8000-0x7cdd85d9]
ACPI: Reserving SSDT table memory at [mem 0x7cdd7000-0x7cdd7057]
ACPI: Reserving SSDT table memory at [mem 0x7cdd6000-0x7cdd60fe]
ACPI: Reserving SSDT table memory at [mem 0x7cdd5000-0x7cdd5762]
ACPI: Reserving SSDT table memory at [mem 0x7cdd4000-0x7cdd428f]
ACPI: Reserving SSDT table memory at [mem 0x7cdd3000-0x7cdd3179]
ACPI: Reserving FPDT table memory at [mem 0x7cdd1000-0x7cdd1043]
ACPI: Reserving CSRT table memory at [mem 0x7cdd0000-0x7cdd014b]
ACPI: Reserving BGRT table memory at [mem 0x7cdd2000-0x7cdd2037]
ACPI: Local APIC address 0xfee00000
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x000000007cdfffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000008efff]
node 0: [mem 0x0000000000090000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x0000000024a7ffff]
node 0: [mem 0x0000000024b00000-0x000000007bad3fff]
node 0: [mem 0x000000007bcf4000-0x000000007bcf4fff]
node 0: [mem 0x000000007bcf6000-0x000000007bcf7fff]
node 0: [mem 0x000000007bcf9000-0x000000007c7fffff]
node 0: [mem 0x000000007cc00000-0x000000007ccc2fff]
node 0: [mem 0x000000007cdf7000-0x000000007cdfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007cdfffff]
On node 0 totalpages: 508870
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 7928 pages used for memmap
DMA32 zone: 504874 pages, LIFO batch:63
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 98 pages in unavailable ranges
On node 0, zone DMA32: 512 pages in unavailable ranges
On node 0, zone DMA32: 128 pages in unavailable ranges
On node 0, zone DMA32: 544 pages in unavailable ranges
On node 0, zone DMA32: 1 pages in unavailable ranges
On node 0, zone DMA32: 1 pages in unavailable ranges
On node 0, zone DMA32: 1024 pages in unavailable ranges
On node 0, zone DMA32: 308 pages in unavailable ranges
On node 0, zone DMA32: 12800 pages in unavailable ranges
x86/hpet: Will disable the HPET for this platform because it's not reliable
Reserving Intel graphics memory at [mem 0x7d000000-0x7effffff]
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: hibernation: Registered nosave memory: [mem 0x24a80000-0x24afffff]
PM: hibernation: Registered nosave memory: [mem 0x7bad4000-0x7bcf3fff]
PM: hibernation: Registered nosave memory: [mem 0x7bcf5000-0x7bcf5fff]
PM: hibernation: Registered nosave memory: [mem 0x7bcf8000-0x7bcf8fff]
PM: hibernation: Registered nosave memory: [mem 0x7c800000-0x7cbfffff]
PM: hibernation: Registered nosave memory: [mem 0x7ccc3000-0x7cdf6fff]
[mem 0x7f000000-0xe00f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
efi: Setup done, disabling due to 32/64-bit mismatch
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 48 pages/cpu s156696 r8192 d31720 u524288
pcpu-alloc: s156696 r8192 d31720 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 500856
Kernel command line: BOOT_IMAGE=/EFI/boot/vmlinuz rw root=/dev/null video=-32 autologin rdinit=/vtoy/vtoy
printk: log_buf_len individual max cpu contribution: 4096 bytes
printk: log_buf_len total cpu_extra contributions: 12288 bytes
printk: log_buf_len min size: 16384 bytes
printk: log_buf_len: 32768 bytes
printk: early log buf free: 4728(28%)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 1879352K/2035480K available (12289K kernel code, 693K rwdata, 2944K rodata, 1096K init, 2200K bss, 155872K reserved, 0K cma-reserved)
Kernel/User page tables isolation: enabled
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 8448, nr_irqs: 1024, preallocated irqs: 0
random: crng init done
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200925
APIC: Switch to symmetric I/O mode setup
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x13381e82524, max_idle_ns: 440795248224 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 2666.66 BogoMIPS (lpj=1333333)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Kernel not compiled with retpoline; no mitigation available!
Spectre V2 : Vulnerable
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
MMIO Stale Data: Unknown: No mitigations
x86/fpu: x87 FPU will use FXSAVE
Freeing SMP alternatives memory: 20K
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
smpboot: CPU0: Intel(R) Atom(TM) CPU Z3735F @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x8)
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 0000007fffffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
rcu: Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (10666.66 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x7cd47000-0x7cdb6fff] (458752 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
raid6: sse2x4 gen() 3087 MB/s
raid6: sse2x4 xor() 1167 MB/s
raid6: sse2x2 gen() 2903 MB/s
raid6: sse2x2 xor() 1681 MB/s
raid6: sse2x1 gen() 2194 MB/s
raid6: sse2x1 xor() 1138 MB/s
raid6: using algorithm sse2x4 gen() 3087 MB/s
raid6: .... xor() 1167 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88800141F000 000501 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8880014F5800 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888001501400 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88800140A840 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] not reserved in ACPI motherboard resources
PCI: not using MMCONFIG
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [PLPE] (on)
ACPI: Power Resource [CLK0] (on)
ACPI: Power Resource [P28P] (off)
ACPI: Power Resource [P18P] (off)
ACPI: Power Resource [CLK0] (on)
ACPI: Power Resource [CLK1] (on)
ACPI: Power Resource [P28X] (off)
ACPI: Power Resource [P18X] (off)
ACPI: Power Resource [P28T] (off)
ACPI: Power Resource [P18T] (off)
ACPI: Power Resource [P1XT] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff window]
pci_bus 0000:00: root bus resource [mem 0x7d000001-0x7f000000 window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
pci 0000:00:02.0: reg 0x20: [io 0x1000-0x1007]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
iommu: Default domain type: Translated
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x24a80000-0x27ffffff]
e820: reserve RAM buffer [mem 0x7bad4000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bcf5000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bcf8000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7c800000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7ccc3000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7ce00000-0x7fffffff]
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0500-0x05fe] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 3 devices
NET: Registered protocol family 2
IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000fffff window]
pci_bus 0000:00: resource 9 [mem 0x90c00000-0x90ffffff window]
pci_bus 0000:00: resource 10 [mem 0x7d000001-0x7f000000 window]
pci_bus 0000:00: resource 11 [mem 0x80000000-0x908ffffe window]
pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed40fff window]
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 96416K
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x13381e82524, max_idle_ns: 440795248224 ns
clocksource: Switched to clocksource tsc
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=19 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
fuse: init (API version 7.32)
SGI XFS with ACLs, security attributes, quota, no debug enabled
xor: measuring software checksum speed
prefetch64-sse : 5000 MB/sec
generic_sse : 4480 MB/sec
xor: using function: prefetch64-sse (5000 MB/sec)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler mq-deadline registered
io scheduler kyber registered
efifb: probing for efifb
efifb: framebuffer at 0x80000000, using 4032k, total 4032k
efifb: mode is 1280x800x32, linelength=5120, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x50
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x33000020
intel_idle: v0.5.1 model 0x37
intel_idle: Local APIC timer is reliable in all C-states
ACPI: AC: found native INT33F4 PMIC, not loading
[Firmware Bug]: No valid trip found
battery: ACPI: Battery: found native INT33F4 PMIC, not loading
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
00:02: ttyS0 at I/O 0x3f8 (irq = 113, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
brd: module loaded
loop: module loaded
mtip32xx Version 1.3.1
Error creating debugfs parent
tun: Universal TUN/TAP device driver, 1.6
igbvf: Intel(R) Gigabit Virtual Function Network Driver
igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
tlan: ThunderLAN driver v1.17
tlan: 0 devices installed, PCI: 0 EISA: 0
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
rtc_cmos 00:00: registered as rtc0
rtc_cmos 00:00: setting system clock to 2025-06-26T18:46:02 UTC (1750963562)
rtc_cmos 00:00: no alarms, y3k, 242 bytes nvram
i2c /dev entries driver
intel_pstate: Intel P-state driver initializing
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
usbcore: registered new interface driver vub300
usbcore: registered new interface driver ushc
sdhci-pltfm: SDHCI platform and OF driver helper
hid: raw HID events driver (C) Jiri Kosina
ipip: IPv4 and MPLS over IPv4 tunneling driver
gre: GRE over IPv4 demultiplexor driver
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 33
Key type rxrpc registered
Key type rxrpc_s registered
Key type dns_resolver registered
microcode: sig=0x30678, pf=0x2, revision=0x82a
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (54159012118, 1979845)->(54166436239, -5444276)
registered taskstats version 1
Loading compiled-in X.509 certificates
Btrfs loaded, crc32c=crc32c-generic
i2c_designware 80860F41:04: I2C bus managed by PUNIT
clk: Disabling unused clocks
Freeing unused kernel image (initmem) memory: 1096K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 1152K
Run /vtoy/vtoy as init process
with arguments:
/vtoy/vtoy
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/EFI/boot/vmlinuz
usb 1-1: new high-speed USB device number 2 using xhci_hcd
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 1-1:1.0
usb 1-2: new low-speed USB device number 3 using xhci_hcd
scsi 0:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 120176640 512-byte logical blocks: (61.5 GB/57.3 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: detected capacity change from 0 to 61530439680
sda: detected capacity change from 0 to 61530439680
sda: sda1 sda2
sda: detected capacity change from 0 to 61530439680
sd 0:0:0:0: [sda] Attached SCSI removable disk
udevd[1387]: starting version 182
i2c_hid i2c-FTSC1000:00: supply vdd not found, using dummy regulator
i2c_hid i2c-FTSC1000:00: supply vddl not found, using dummy regulator
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0603:0002.0001/input/input2
hid-generic 0003:0603:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-2/input0
input: SINO WEALTH USB Composite Device Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:0603:0002.0002/input/input3
input: SINO WEALTH USB Composite Device System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:0603:0002.0002/input/input4
input: SINO WEALTH USB Composite Device Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:0603:0002.0002/input/input5
hid-generic 0003:0603:0002.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-2/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: FTSC1000:00 2808:1015 as /devices/platform/80860F41:03/i2c-3/i2c-FTSC1000:00/0018:2808:1015.0003/input/input6
input: FTSC1000:00 2808:1015 UNKNOWN as /devices/platform/80860F41:03/i2c-3/i2c-FTSC1000:00/0018:2808:1015.0003/input/input8
hid-multitouch 0018:2808:1015.0003: input,hidraw2: I2C HID v1.00 Device [FTSC1000:00 2808:1015] on i2c-FTSC1000:00
intel_sst_acpi 80860F28:00: Detected Baytrail-CR platform
intel_sst_acpi 80860F28:00: LPE base: 0x90a00000 size:0x200000
intel_sst_acpi 80860F28:00: IRAM base: 0x90ac0000
intel_sst_acpi 80860F28:00: DRAM base: 0x90b00000
intel_sst_acpi 80860F28:00: SHIM base: 0x90b40000
intel_sst_acpi 80860F28:00: Mailbox base: 0x90b44000
intel_sst_acpi 80860F28:00: DDR base: 0x20000000
Linux agpgart interface v0.103
intel_sst_acpi 80860F28:00: Got drv data max stream 25
intel_sst_acpi 80860F28:00: Direct firmware load for intel/fw_sst_0f28.bin failed with error -2
intel_sst_acpi 80860F28:00: request fw failed
ACPI: bus type drm_connector registered
checking generic (80000000 3f0000) vs hw (90000000 400000)
checking generic (80000000 3f0000) vs hw (80000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
i915 0000:00:02.0: [drm] *ERROR* Failed to get the SoC PWM chip
[drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:21: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
i915 0000:00:02.0: [drm] HDaudio controller not detected, using LPE audio instead
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
NET: Registered protocol family 10
Segment Routing with IPv6
zram: Added device: zram0
zram: Added device: zram1
zram: Added device: zram2
zram: Added device: zram3
zram0: detected capacity change from 0 to 253485056
zram1: detected capacity change from 0 to 253485056
zram2: detected capacity change from 0 to 253485056
zram3: detected capacity change from 0 to 253485056
Adding 247540k swap on /dev/zram0. Priority:100 extents:1 across:247540k SSFS
Adding 247540k swap on /dev/zram1. Priority:100 extents:1 across:247540k SSFS
Adding 247540k swap on /dev/zram2. Priority:100 extents:1 across:247540k SSFS
Adding 247540k swap on /dev/zram3. Priority:100 extents:1 across:247540k SSFS
I thank yoo guys for your nice, fast and friendly support, but I don't want to hold you up any longer. I will install an ubuntu version, such as mint, lubuntu or bodhi, which are running out of the box on this convertible. I don't want to spend much more time in this project.
Maybe I'll try sthg like K3nn3th did, to get SliTaz running.
Thank's again for your replys. Keep up the good work ;-)