UEFI only Laptop - Trouble booting

SliTaz Forum » English Support » Live and installation

UEFI only Laptop - Trouble booting

(146 posts) (7 voices)

Started 8 months ago by maybl8
Latest reply from maybl8
This topic is not resolved

Tags:

No tags yet.

« Previous 1…345…10 Next »

Ceel

offline
Administrator
@ shann,

What about using rEFInd instead of Grub2?
I did it in the past for Next64; here is the console ISO.
Attachments
next64refind-console.md5.txt (0.1 KB, 64 downloads) 7 months old
Posted 7 months ago #
maybl8

offline
Member

I was able to boot with the current-core64.iso
I got grub screen and it booted into slitaz.

I burned it to a flash drive and it worked.

My laptop is a hi res screen so font was very small.
I changed it to 1920x1080 so I could read it.

I had to do this all with keyboard because I had no touchpad.
Do you include touchpad drivers?

Also when I changed the resolution and saved it, it didn't save it.
When I rebooted I didn't have 1920x1080. It was 3840x2160.

But this is progress.
I am guessing file system installed is read only.

Posted 7 months ago #
maybl8

offline
Member

I can't see how to edit my post here so here is some more questions.
It appears as if slitaz runs in memory. That would be why it didn't save any changes to my flash drive. Is there a way to save the changes?

Also I am in USA. My keyboard for US isn't quite correct.
Example the letter 'a' comes out as 'q'.
Thanks
Dan

Posted 7 months ago #
shann

offline
Administrator

Hi Dan,

Yes, filesystem is read-only, it's same as cdrom, and load as ram.

I test on my pro laptop that only uefi (HP G7 Elitebook)
Infact touchpad not work :(.

We have already xorg-xf86-input-synaptics on core64, i check with Ubuntu 20.04 LTS running.
I see with xinput synaptics Touchpad, but driver used seem hid-multitouch, don't present in kernel config (not set), check to add this and test.

Concerning keyboard, that strange normally it's work.

Posted 7 months ago #

maybl8

offline

Member

My system is HP Spectre x360 Convertible 15

Maybe I selected the wrong keyboard on startup.
I just used the defaults.

I will be happy to test anything if you want me to.

My timezone is America/New_York

One more thing How do I get wifi to work?

Complete Computer Specs:

[demo@Manjaro ~]$ inxi -Faaz
System:
  Kernel: 6.8.2-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc avail: acpi_pm
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.8-x86_64
    root=UUID=45ca132d-4a37-4dc3-afa0-be2e80d6a4a2 rw quiet
    udev.log_priority=3
  Desktop: KDE Plasma v: 6.0.3 tk: Qt v: N/A info: frameworks v: 6.0.0
    wm: kwin_x11 tools: xscreensaver,xscreensaver-systemd vt: 2 dm: SDDM
    Distro: Manjaro base: Arch Linux
Machine:
  Type: Convertible System: HP product: HP Spectre x360 Convertible 15-df1xxx
    v: N/A serial: <superuser required> Chassis: type: 31
    serial: <superuser required>
  Mobo: HP model: 863F v: 54.24 serial: <superuser required>
    part-nu: 7UT64UA#ABA uuid: <superuser required> UEFI: AMI v: F.29
    date: 11/02/2022
Battery:
  ID-1: BAT0 charge: 59.3 Wh (100.0%) condition: 59.3/59.3 Wh (100.0%)
    volts: 12.9 min: 11.6 model: HP Primary type: Li-ion serial: <filter>
    status: full cycles: 242
  Device-1: hid-0018:04F3:2992.0001-battery model: ELAN2514:00 04F3:2992
    serial: N/A charge: N/A status: N/A
CPU:
  Info: model: Intel Core i7-10510U bits: 64 type: MT MCP
    arch: Comet/Whiskey Lake note: check gen: core 10 level: v3 note: check
    built: 2018 process: Intel 14nm family: 6 model-id: 0x8E (142)
    stepping: 0xC (12) microcode: 0xFA
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
    L3: 8 MiB desc: 1x8 MiB
  Speed (MHz): avg: 800 min/max: 400/4900 scaling: driver: intel_pstate
    governor: powersave cores: 1: 800 2: 800 3: 800 4: 800 5: 800 6: 800 7: 800
    8: 800 bogomips: 36812
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling mitigation: Microcode
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed mitigation: Enhanced IBRS
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Enhanced / Automatic IBRS, IBPB:
    conditional, RSB filling, PBRSB-eIBRS: SW sequence
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel CometLake-U GT2 [UHD Graphics] vendor: Hewlett-Packard
    driver: i915 v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20
    ports: active: eDP-1 empty: DP-1,DP-2 bus-ID: 00:02.0 chip-ID: 8086:9b41
    class-ID: 0300
  Device-2: NVIDIA GP108M [GeForce MX250] vendor: Hewlett-Packard
    driver: nvidia v: 550.67 alternate: nouveau,nvidia_drm non-free: 545.xx+
    status: current (as of 2024-02; EOL~2026-12-xx) arch: Pascal code: GP10x
    process: TSMC 16nm built: 2016-2021 pcie: gen: 1 speed: 2.5 GT/s lanes: 4
    link-max: gen: 3 speed: 8 GT/s bus-ID: 3b:00.0 chip-ID: 10de:1d13
    class-ID: 0302
  Device-3: Chicony HP Wide Vision FHD Camera driver: uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-5:2 chip-ID: 04f2:b67b
    class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.4
    compositor: kwin_x11 driver: X: loaded: modesetting,nvidia dri: iris
    gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 3840x2160 s-dpi: 220 s-size: 443x249mm (17.44x9.80")
    s-diag: 508mm (20.01")
  Monitor-1: eDP-1 model: AU Optronics 0x30eb built: 2017 res: 3840x2160
    hz: 60 dpi: 284 gamma: 1.2 size: 344x193mm (13.54x7.6") diag: 394mm (15.5")
    ratio: 16:9 modes: 3840x2160
  API: EGL v: 1.5 hw: drv: intel iris drv: nvidia platforms: device: 0
    drv: nvidia device: 1 drv: iris device: 3 drv: swrast surfaceless:
    drv: nvidia x11: drv: iris inactive: gbm,wayland,device-2
  API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: intel mesa
    v: 24.0.4-manjaro1.1.1 glx-v: 1.4 direct-render: yes renderer: Mesa Intel
    UHD Graphics (CML GT2) device-ID: 8086:9b41 memory: 14.9 GiB unified: yes
  API: Vulkan v: 1.3.279 layers: 5 device: 0 type: discrete-gpu
    name: NVIDIA GeForce MX250 driver: nvidia v: 550.67 device-ID: 10de:1d13
    surfaces: xcb,xlib device: 1 type: integrated-gpu name: Intel UHD
    Graphics (CML GT2) driver: mesa intel v: 24.0.4-manjaro1.1.1
    device-ID: 8086:9b41 surfaces: xcb,xlib
Audio:
  Device-1: Intel Comet Lake PCH-LP cAVS vendor: Hewlett-Packard
    driver: sof-audio-pci-intel-cnl alternate: snd_hda_intel, snd_soc_skl,
    snd_sof_pci_intel_cnl bus-ID: 00:1f.3 chip-ID: 8086:02c8 class-ID: 0401
  API: ALSA v: k6.8.2-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: JACK v: 1.9.22 status: off tools: N/A
  Server-2: PipeWire v: 1.0.4 status: active with: 1: pipewire-pulse
    status: active 2: pipewire-media-session status: active 3: pipewire-alsa
    type: plugin tools: pactl,pw-cat,pw-cli
Network:
  Device-1: Intel Comet Lake PCH-LP CNVi WiFi driver: iwlwifi v: kernel
    bus-ID: 00:14.3 chip-ID: 8086:02f0 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
  Info: services: NetworkManager, systemd-networkd, systemd-timesyncd,
    wpa_supplicant
Drives:
  Local Storage: total: 960.42 GiB used: 251.75 GiB (26.2%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
    model: SSD 970 EVO Plus 1TB size: 931.51 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
    fw-rev: 2B2QEXM7 temp: 40.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 model: USB DISK 3.0 size: 28.91 GiB
    block-size: physical: 512 B logical: 512 B type: USB rev: 3.2 spd: 5 Gb/s
    lanes: 1 mode: 3.2 gen-1x1 tech: N/A serial: <filter> fw-rev: PMAP
    scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
  ID-1: / raw-size: 163 GiB size: 160.13 GiB (98.24%) used: 57.48 GiB (35.9%)
    fs: ext4 dev: /dev/nvme0n1p8 maj-min: 259:8
  ID-2: /boot/efi raw-size: 499 MiB size: 498 MiB (99.80%)
    used: 32.9 MiB (6.6%) fs: vfat dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-3: /home raw-size: 388.57 GiB size: 381.41 GiB (98.16%)
    used: 194.24 GiB (50.9%) fs: ext4 dev: /dev/nvme0n1p7 maj-min: 259:7
Swap:
  Alert: No swap data was found.
Sensors:
  System Temperatures: cpu: 53.0 C pch: 51.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Memory: total: 16 GiB note: est. available: 15.26 GiB used: 5.37 GiB (35.2%)
  Processes: 308 Power: uptime: 22h 20m states: freeze,mem,disk
    suspend: s2idle wakeups: 2 hibernate: platform avail: shutdown, reboot,
    suspend, test_resume image: 6.08 GiB services: org_kde_powerdevil,upowerd
    Init: systemd v: 255 default: graphical tool: systemctl
  Packages: pm: pacman pkgs: 1893 libs: 478 tools: pacaur,pamac,pikaur,yay
    Compilers: clang: 17.0.6 gcc: 13.2.1 Shell: Bash v: 5.2.26
    running-in: alacritty inxi: 3.3.33

Thanks
Dan

Posted 7 months ago #

shann

offline
Administrator

Damn,

I build i2c-hid, hid-multitouch, but touchpad won't work.
Retest with boot on Ubuntu to ensure not forget modules, if rmmod i2c-hid, touchpad not move, if modprobe move again.

Concerning your wifi card, think you need ucode for iwlwifi.
On my G7 need iwlwifi-cc-a0-59.ucode, for your card "Intel Comet Lake PCH-LP CNVi WiFi driver" seem need "iwlwifi-QuZ-a0-hr-b0"
https://discussion.fedoraproject.org/t/intel-comet-lake-pch-lp-cnvi-wifi-driver-n-a/78351/5

Not packed, need check for add new firmware package for iwlwifi, but you get them here :)
https://people.slitaz.org/~shann/slitaz-current-stuff/firmware-iwlwifi/

I also rebuild iso, when test wifi see wpa_supplicant failed to run because miss libssl 1.1 and libcrypto 1.1.
Infact think miss to rebuild it on my local wok, and tazlito use local packages in priority of mirror

https://people.slitaz.org/~shann/slitaz-current-stuff/efitest/slitaz-current-core64.iso

Posted 7 months ago #
maybl8

offline
Member

I appreciate all the work you are doing on this.

I look forward to getting an .iso that I can install on a flash drive and have the settings saved and I can update.

I like the idea of a rolling release that I can install once and just update.

Once I can save settings to the flash drive that I install to then I can add drivers that work for my laptop.

Thanks for all the work you are doing on this.
Dan

Posted 7 months ago #
shann

offline
Administrator

Hi Dan,

No problem, thanks :).

I put ubuntu kernel + modules on my usb key, and edit grub to boot them with SliTaz Current.
Touchpad work, in case our Xorg stack / synaptics not root cause.
Need to continue check diff between ubuntu kernel / slitaz kernel and found options that include in kernel to detect touchpad, infact if not forgot, we have same modules load (i2c_hid, hid, hid_multitouch, hid_generic)

For you touchpad, can you please put result of "xinput" ?

In my case, for Ubuntu see at SYNA30B1:00 06CB:Touchpad and PCI ID 06CB:CE07

Technically you can install on usb key but keep in mind that flash wear for write access.
Also at time tazinst don't have support to install grub2 or grub2-efi, also same for separate /boot.

Posted 7 months ago #
shann

offline
Administrator

Hi,

Up linux to 5.10.214 and xorg server patch for april CVEs.
https://lists.x.org/archives/xorg-announce/2024-April/003497.html

For linux 5.10.214, fix issue on paravirt i see previously on 5.10.211 - 5.10.213
On changelog, we can see "x86/paravirt: Fix build due to __text_gen_insn() backport"

Posted 7 months ago #
alanyih

offline
Administrator
Test for core64 on qemu, i don't have xorg launch due of unknown video device.

# qemu-system-x86_64 --help | grep -A1 vga
vga [std|cirrus|vmware|qxl|xenfb|tcx|cg3|virtio|none]
select video card type

----

root@mx1:~# cat /etc/mx-version
MX-23.1_ahs_x64 Libretto October 15, 2023

root@mx1:~# ps m | grep qemu
24279 pts/1 - 1:07 qemu-system-x86_64 -m 2G -enable-kvm -bios OVMF.fd -vga vmware -cdrom slitaz-current-core64.iso
24631 pts/2 - 0:00 grep qemu

root@mx1:~# exit
logout
tux@slitaz:~$ uname -a
Linux slitaz 5.10.210-slitaz64 #2 SMP Mon Mar 18 12:38:59 Europe 2024 x86_64 GNU/Linux

tux@slitaz:~$ blkid
/dev/sr0: BLOCK_SIZE="2048" UUID="2024-03-29-22-05-19-00" LABEL="SliTaz core64" TYPE="iso9660" PTTYPE="PMBR"
/dev/zram0: UUID="fee28e8a-0a5b-4894-9e59-3230b0609c9b" TYPE="swap"
Attachments
qemu-fbdev-mx1.png (75 KB, 105 downloads) 7 months old
Posted 7 months ago #
shann

offline
Administrator

Hi alanyih,

Infact thanks for tips, with -vga vmware it's work :).

Continue to fight with touchpad, go to deep inside kernel module to understand.

Not directly related to touchpad, i put amdgpu as module on kernel, 'black screen' with Xorg, and see on dmesg need amdgpu firmware, with it, Xorg happy and glxgears also ~3300 frames in 5s, ~600 FPS ^^

Posted 7 months ago #
shann

offline
Administrator

\o/

Touchpad work now, don't think to save gentoo forum link.

In case infact due of missing config on kernel inside, below diff between previous config and new.

+CONFIG_PINCTRL_AMD=y
+CONFIG_PINCTRL_MCP23S08_I2C=m
+CONFIG_PINCTRL_MCP23S08=m
+CONFIG_PINCTRL_SX150X=y
+CONFIG_PINCTRL_CHERRYVIEW=m
+CONFIG_PINCTRL_LYNXPOINT=m
+CONFIG_PINCTRL_ALDERLAKE=m
+CONFIG_PINCTRL_BROXTON=m
+CONFIG_PINCTRL_CANNONLAKE=m
+CONFIG_PINCTRL_CEDARFORK=m
+CONFIG_PINCTRL_DENVERTON=m
+CONFIG_PINCTRL_ELKHARTLAKE=m
+CONFIG_PINCTRL_EMMITSBURG=m
+CONFIG_PINCTRL_GEMINILAKE=m
+CONFIG_PINCTRL_ICELAKE=m
+CONFIG_PINCTRL_JASPERLAKE=m
+CONFIG_PINCTRL_LAKEFIELD=m
+CONFIG_PINCTRL_LEWISBURG=m
+CONFIG_PINCTRL_SUNRISEPOINT=m
+CONFIG_PINCTRL_TIGERLAKE=m
+CONFIG_MFD_INTEL_LPSS=m
+CONFIG_MFD_INTEL_LPSS_ACPI=m
+CONFIG_MFD_INTEL_LPSS_PCI=m

If understand big miss part is PINCTRL_AMD, infact all other stuff about I2C / HID has already set in my step by step work to have touchpad work.
Big strange it's that with I2C/HID, see device on /sys for SYNA30AF but nothing for 06CB:CE07 (aka touchpad).

Now it's ok

tux@slitaz:~$ uname -a
Linux slitaz 5.15.153-slitaz64 #1 SMP Sat Apr 6 21:18:53 CEST 2024 x86_64 GNU/Linux
tux@slitaz:~$ xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SYNA30AF:00 06CB:CE07 Mouse id=12 [slave pointer (2)]
⎜ ↳ SYNA30AF:00 06CB:CE07 Touchpad id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ HP HD Camera: HP HD Camera id=10 [slave keyboard (3)]
↳ HP HD Camera: HP IR Camera id=11 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=14 [slave keyboard (3)]
↳ Wireless hotkeys id=15 [slave keyboard (3)]
↳ HP WMI hotkeys id=16 [slave keyboard (3)]
tux@slitaz:~$ find /sys | grep drivers.*06CB*
/sys/bus/hid/drivers/hid-multitouch/0018:06CB:CE07.0002
tux@slitaz:~$ find /sys | grep drivers.*SYNA*
/sys/bus/i2c/drivers/i2c_hid_acpi/i2c-SYNA30AF:00

Need to check for add only necessary stuff, maybe i add few modules / built-in unecessary on kernel config.

Posted 7 months ago #
shann

offline
Administrator

Hi,

Below global diff between current 5.10.214 and new config for AMDGPU / Touchpad

root@slitaz:/home/slitaz/wok# hg diff linux/stuff |grep '\+CONFIG'
+CONFIG_CC_VERSION_TEXT="x86_64-slitaz-linux-gcc (SliTaz) 6.3.0"
+CONFIG_GCC_VERSION=60300
+CONFIG_IRQ_MSI_IOMMU=y
+CONFIG_X86_AMD_PLATFORM_DEVICE=y
+CONFIG_PM_GENERIC_DOMAINS=y
+CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
+CONFIG_HMM_MIRROR=y
+CONFIG_PCI_ATS=y
+CONFIG_PCI_PRI=y
+CONFIG_PCI_PASID=y
+CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
+CONFIG_MOUSE_PS2_SMBUS=y
+CONFIG_MOUSE_ELAN_I2C=m
+CONFIG_MOUSE_ELAN_I2C_I2C=y
+CONFIG_MOUSE_ELAN_I2C_SMBUS=y
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+CONFIG_MOUSE_SYNAPTICS_USB=m
+CONFIG_I2C=y
+CONFIG_ACPI_I2C_OPREGION=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_REG=m
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_AMD_MP2=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_ISMT=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_SCMI=m
+CONFIG_I2C_DESIGNWARE_CORE=y
+CONFIG_I2C_DESIGNWARE_SLAVE=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_SLAVE=y
+CONFIG_PINCTRL_AMD=y
+CONFIG_PINCTRL_CHERRYVIEW=m
+CONFIG_PINCTRL_LYNXPOINT=m
+CONFIG_PINCTRL_BROXTON=m
+CONFIG_PINCTRL_CANNONLAKE=m
+CONFIG_PINCTRL_CEDARFORK=m
+CONFIG_PINCTRL_DENVERTON=m
+CONFIG_PINCTRL_EMMITSBURG=m
+CONFIG_PINCTRL_GEMINILAKE=m
+CONFIG_PINCTRL_ICELAKE=m
+CONFIG_PINCTRL_JASPERLAKE=m
+CONFIG_PINCTRL_LEWISBURG=m
+CONFIG_PINCTRL_SUNRISEPOINT=m
+CONFIG_PINCTRL_TIGERLAKE=m
+CONFIG_GPIO_AMDPT=m
+CONFIG_GPIO_DWAPB=m
+CONFIG_GPIO_AMD_FCH=m
+CONFIG_SSB_DRIVER_GPIO=y
+CONFIG_BCMA_DRIVER_GPIO=y
+CONFIG_DRM_SCHED=m
+CONFIG_DRM_AMDGPU=m
+CONFIG_DRM_AMDGPU_SI=y
+CONFIG_DRM_AMDGPU_CIK=y
+CONFIG_DRM_AMDGPU_USERPTR=y
+CONFIG_DRM_AMD_ACP=y
+CONFIG_DRM_AMD_DC=y
+CONFIG_DRM_AMD_DC_DCN=y
+CONFIG_DRM_AMD_DC_DCN3_0=y
+CONFIG_DRM_AMD_DC_HDCP=y
+CONFIG_DRM_AMD_DC_SI=y
+CONFIG_SND_SOC_AMD_ACP=m
+CONFIG_SND_SOC_AMD_ACP3x=m
+CONFIG_SND_SOC_AMD_RENOIR=m
+CONFIG_SND_SOC_AMD_RENOIR_MACH=m
+CONFIG_SND_SOC_DMIC=m
+CONFIG_HIDRAW=y
+CONFIG_UHID=m
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_KYE=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_ITE=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_REDRAGON=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=y
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_INTEL_ISH_HID=m
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_IOMMU_DMA=y
+CONFIG_AMD_IOMMU=y
+CONFIG_AMD_IOMMU_V2=m

I launch rebuild it on my local wok to create new iso and test it before push.

In case AMDGPU as kernel mod implied that include firmware-amdgpu, need check final iso size.
Test with vmlinuz and modules-5.10.214.gz (to have modules/firmware) on my EeePC seem no impact/diff with actual 5.10.214.

At least think only need for core64, infact AMDGPU is for Graphics Core Next (GCN) architecture.
Not need to include them on linux / linux-pae.

Posted 7 months ago #
shann

offline
Administrator
Hi,

Below usb key with new iso i tested, compare to actual iso, increase of 10Mo (due of 60Mo for amdgpu).

Need to rebuild iso, infact all stuff done on live, i'm forgot to saved iso after dd on usb and real test.

To not depend of fbefi, need xorg-xf86-video-amdgpu :)
Attachments
hp_g7_with_amdgpu_touchpad.png (252 KB, 115 downloads) 7 months old
Posted 7 months ago #
shann

offline
Administrator
Hi,

I put iso to efitest folder :
https://people.slitaz.org/~shann/slitaz-current-stuff/efitest/slitaz-current-core64.iso

Below test on qemu, yes inside SliTaz with kvm (i build 6.2.0 + pick OVFM.fd from ubuntu 20, embedded version in receipt is too old).
Attachments
slitaz-current_on_qemu.png (234.8 KB, 119 downloads) 7 months old
Posted 7 months ago #

RSS feed for this topic

« Previous 1…345…10 Next »

Reply »

You must log in to post.

UEFI only Laptop - Trouble booting

Attachments

Attachments

Attachments

Attachments

Reply »