[Current version dev thread] - Usage of SliTaz 4.0 / rolling

SliTaz Forum » English Support » Live and installation

[Current version dev thread] - Usage of SliTaz 4.0 / rolling

(621 posts) (14 voices)

Started 2 years ago by shann
Latest reply from shann
This topic is not a support question

Tags:

No tags yet.

« Previous 1…394041 42 Next »

shann

offline
Administrator

Maybe i said win too fast,

Seem segfault appear for commands :/

root@slitaz:/home/slitaz/wok# make
make: *** No targets specified and no makefile found. Stop.
root@slitaz:/home/slitaz/wok# cook glibc-locale
Segmentation fault
sh: 0: unknown operand

nodev aufs
Setup aufs chroot...
Segmentation fault
sh: 0: unknown operand

Cook: glibc-locale 2.34
==================================================================================================================
QA: checking package receipt...
==================================================================================================================

Pack: glibc-locale 2.34-x86_64
==================================================================================================================
Executing: genpkg_rules
* Removing all base files... Done
* Removing locale: cs Done
* Removing locale: de Done
* Removing locale: es Done
* Removing locale: fr Done
* Removing locale: hu Done
* Removing locale: id Done
* Removing locale: it Done
* Removing locale: pt Done
* Removing locale: ru Done
* Removing locale: sl Done
* Removing locale: zh_CN Done
* Removing locale: zh_TW Done
Copying "receipt"... Segmentation fault
Segmentation fault
cat: can't open '/home/slitaz/wok/glibc-locale/taz/glibc-locale-*/files.list': No such file or directory
Summary for: glibc-locale 2.34
==================================================================================================================
Packed : 31.4M
Compressed :
Files : 0
Cook time : 0s
Cook date : 2025-07-25 13:08
Host arch : x86_64
==================================================================================================================

Leaving aufs chroot...
Updating x86_64 chroot environment...
Segmentation fault
Segmentation fault
sh: 0: unknown operand
Segmentation fault
sh: bad number
Package "glibc-locale" blocked.

Posted 3 months ago #
shann

offline
Administrator

Hi,

Seem that below process work (need to ensure that breaking nothing on EeePC and case usage)

1/ rebuild slitaz-toolchain (with remove --disable-initfini-array for binutils)
=> when test glibc-base on current64 chroot segfault for make

2/ rebuild toolchain again with new binutils / gcc fresh packages
=> install glibc-base again on current64 chroot, make happy no segfault

3/ Inside current64 chroot, prepare cook env with cook setup
=> reinstall glibc-base / gcc / binutils from fresh packages

4/ From current64 chroot, try to build package (test with zlib)
=> no segfault see

5/ Last test, try to rebuild glibc and check if segfault when package glibc-*, i blocked glibc-* to ensure no erase.
=> seem no issue or segfault appear when pack glibc-* (except not found for version libs 2.3*.so)

Posted 3 months ago #
shann

offline
Administrator
Test on my EeePC,

All apps seem work correctly.

I update udev/gvfs packages (i don't push new udev / gvfs on mirror), work except issue i see about pcmanfm when disconnect through pcmanfm.

At time i can push udev/gvfs packages on mirror for current64.

Need to check for mass rebuild with glibc 2.34, or at least gvfs/pcmanfm to test if segfault libc.so.6 when disconnect mtp on pcmanfm dissapear or not.

EDIT: i push udev, libgudev, pcmanfm, gvfs new packages on mirror.
For pcmanfm, rebuild it and new change it's french translation for right click ("ouvrir en tant que root", "lancer le diaporama", "définir en tant que fond d'écran")
Attachments
current64_glibc234_eeepc.png (141.6 KB, 130 downloads) 3 months old
Posted 3 months ago #
shann

offline
Administrator

Hi

Just finish to rebuild slitaz-toolchain twice and update chroot current64. Ready for mass rebuild.

(current64) root@eretria:/home/slitaz/wok# cat /usr/share/doc/slitaz/toolchain.txt
SliTaz GNU/Linux toolchain
================================================================================

Build date : 2025-07-30
Architecture : x86_64
Build system : x86_64-slitaz-linux
Host system : x86_64-slitaz-linux

Packages:

* Binutils 2.37
* Linux API headers 5.10.238
* GCC 10.2.0
* Glibc 2.34

Toolchain documentation: http://doc.slitaz.org/en:cookbook:toolchain

================================================================================

(current64) root@eretria:/home/slitaz/wok# /lib/libc.so.6
GNU C Library (GNU libc) stable release version 2.34.
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 10.2.0.
libc ABIs: UNIQUE IFUNC ABSOLUTE
For bug reporting instructions, please see:
<https://www.gnu.org/software/libc/bugs.html>.
(current64) root@eretria:/home/slitaz/wok# make
make: *** No targets specified and no makefile found. Stop.

Posted 3 months ago #
shann

offline
Administrator

With glibc 2.34, begin mass rebuild and at time i have few packages failed.

texinfo need to be patch https://bugs.gentoo.org/803485
gc need to be bump to 8.0.6, with 7.2g cook failed with multiple definition of 'GC_jmp_buf';
libwrap need to be patch (sys_errlist and sys_nerr calls remove since glibc 2.32), see https://www.linuxquestions.org/questions/slackware-14/slackware-from-scratch-and-x11-4175560702/page49.html#post6154760

Continue to mass rebuild, when finished, i will doing tests on EeePC to ensure all work as expected.

Posted 3 months ago #
gibor

offline
Moderator

Hi, what you state about textinfo puts me in doubt: I have a problem with wget, where there seems to be a mismatch on address resolution. Now with what you are saying I have a doubt that it is a malfunction of the same.
Is there a command to test the correct operation?
Can you test with wget if it performs the download, or if it responds NOT FOUND at the end of the redirects?
-----------------------------------------------------------------------
Ciao, quello che affermi su textinfo mi mette dei dubbi: ho un problema con wget, dove pare che ci sia un disallineamento sulla risoluzione degli indirizzi. Ora con quello che dici mi viene il dubbio che sia un malfunzionamento dello stesso.
C'è un comando per testare il corretto funzionamento?
Puoi provare con wget se esegue il download, o se alla fine dei redirect risponde NOT FOUND?
------------------------------------------------------------------
python3 adups_search_updates.py
[*] Config: {'project': 'bird$sz6737$7.0_EU$MV168$NUU$N5001L_en-US_other', 'version': 'N5001L-EU-MV168-20190118'}
[*] POST Data: key=1D08F54F25DE319EE62E66447DCC139899D6B44CB6BFB1F1EAC6EB069A9ADEED11E0EBE1FBA69FC627EBCDE98D17E5E4E182DDFABD2C8BD994EA6A8CB9ABE1DDFCC60DCA81C1A900A5B9B7BFE1C0F75FF0DC94EB179FF18099A5E2CF5388D189E916E2E5F5FDB997&shaKey=ae039d7b092fd7f60a8b57c84562c3f0c404e1a86ea042dbee7774c797ead35f
[*] POST: https://fota5p.adups.com/otainter-5.0/fota5/detectSchedule.do
[+] Update found!
[Update Info]
Version: N5001L-EU-MV168-20190326
Size: 60.036491 MB
Download URL: http://cloudflare.mayitek.com/ota/root_data02_2/bird_sz/bird_sz6737_7.0/EU_MV168_NUU_N5001L/en-US/other/N5001L-EU-MV168-20190326/N5001L-EU-MV168-20190118-N5001L-EU-MV168-201903261553587021848/update.zip?m=null
MD5 Sum: df4399574a61d8f9b44d7fbce911b73a
wget download
wget http://cloudflare.mayitek.com/ota/root_data02_2/bird_sz/bird_sz6737_7.0/EU_MV168_NUU_N5001L/en-US/other/N5001L-EU-MV168-20190326/N5001L-EU-MV168-20190118-N5001L-EU-MV168-201903261553587021848/update.zip

Posted 3 months ago #
shann

offline
Administrator

Hi gibor,

Not sure if related :

root@slitaz:~# tazpkg -l |grep glibc
glibc 2.34 meta
glibc-base 2.34 base-system
glibc-dev 2.34 development
glibc-locale 2.34 system-tools
root@slitaz:~# tazpkg -l |grep wget
wget 1.21.3 network
root@slitaz:~# wget http://cloudflare.mayitek.com/ota/root_data02_2/bird_sz/bird_sz6737_7.0/EU_MV168_NUU_N5001L/en-US/other/N5001L-EU-MV168-20190326/N5001L-EU-MV168-20190118-N5001
L-EU-MV168-201903261553587021848/update.zip
--2025-07-30 17:59:33-- http://cloudflare.mayitek.com/ota/root_data02_2/bird_sz/bird_sz6737_7.0/EU_MV168_NUU_N5001L/en-US/other/N5001L-EU-MV168-20190326/N5001L-EU-MV168-20190118-N5001L-EU-MV168-201903261553587021848/update.zip
Resolving cloudflare.mayitek.com... 2606:4700:3110::6812:35cf, 2606:4700:3110::6812:3238, 104.18.50.56, ...
Connecting to cloudflare.mayitek.com|2606:4700:3110::6812:35cf|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: http://fotadown.mayitek.com/ota/root_data02_2/bird_sz/bird_sz6737_7.0/EU_MV168_NUU_N5001L/en-US/other/N5001L-EU-MV168-20190326/N5001L-EU-MV168-20190118-N5001L-EU-MV168-201903261553587021848/update.zip [following]
--2025-07-30 17:59:33-- http://fotadown.mayitek.com/ota/root_data02_2/bird_sz/bird_sz6737_7.0/EU_MV168_NUU_N5001L/en-US/other/N5001L-EU-MV168-20190326/N5001L-EU-MV168-20190118-N5001L-EU-MV168-201903261553587021848/update.zip
Resolving fotadown.mayitek.com... 157.185.128.117, 140.150.22.16
Connecting to fotadown.mayitek.com|157.185.128.117|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: http://43.143.48.199/ota/root_data02_2/bird_sz/bird_sz6737_7.0/EU_MV168_NUU_N5001L/en-US/other/N5001L-EU-MV168-20190326/N5001L-EU-MV168-20190118-N5001L-EU-MV168-201903261553587021848/update.zip [following]
--2025-07-30 17:59:34-- http://43.143.48.199/ota/root_data02_2/bird_sz/bird_sz6737_7.0/EU_MV168_NUU_N5001L/en-US/other/N5001L-EU-MV168-20190326/N5001L-EU-MV168-20190118-N5001L-EU-MV168-201903261553587021848/update.zip
Connecting to 43.143.48.199:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://fota-delta-package-1254102626.cos.ap-shanghai.myqcloud.com/apps/ota/root_data02_2/bird_sz/bird_sz6737_7.0/EU_MV168_NUU_N5001L/en-US/other/N5001L-EU-MV168-20190326/N5001L-EU-MV168-20190118-N5001L-EU-MV168-201903261553587021848/update.zip [following]
--2025-07-30 17:59:35-- http://fota-delta-package-1254102626.cos.ap-shanghai.myqcloud.com/apps/ota/root_data02_2/bird_sz/bird_sz6737_7.0/EU_MV168_NUU_N5001L/en-US/other/N5001L-EU-MV168-20190326/N5001L-EU-MV168-20190118-N5001L-EU-MV168-201903261553587021848/update.zip
Resolving fota-delta-package-1254102626.cos.ap-shanghai.myqcloud.com... 117.68.20.85, 117.68.20.84
Connecting to fota-delta-package-1254102626.cos.ap-shanghai.myqcloud.com|117.68.20.85|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2025-07-30 17:59:35 ERROR 404: Not Found.

If i try url on firefox, receive xml error for object :

<Error>
NoSuchKey
<Message>The specified key does not exist.</Message>
<Resource>
/apps/ota/root_data02_2/bird_sz/bird_sz6737_7.0/EU_MV168_NUU_N5001L/en-US/other/N5001L-EU-MV168-20190326/N5001L-EU-MV168-20190118-N5001L-EU-MV168-201903261553587021848/update.zip
</Resource>
<RequestId>Njg4YTVkZjVfNGIzMDY4MDlfMWU4ZV83NTVhZDI3</RequestId>
<TraceId>
OGVmYzZiMmQzYjA2OWNhODk0NTRkMTBiOWVmMDAxODc0OWRkZjk0ZDM1NmI1M2E2MTRlY2MzZDhmNmI5MWI1OTc5ODg4ODNhM2YxMjhiZjRjM2YxMGJhMzMwMjU5YTg0Y2I4MDFlOGYwMDcyYmMyMGJhNDg3MjNlZTQ5MWRlZWQ=
</TraceId>
</Error>

Now it's py3k need be patched to avoid stuck test with gcc10 https://bugs.python.org/issue38965.

Posted 3 months ago #
gibor

offline
Moderator

Thanks, I didn't encounter any errors during compilation with Python 3. Perhaps the patch was already included, since I use Python 3.13.5, but I'll check the sources.

The download also fails on Android FOTA, so I think support has ended, but this hasn't been reported by the source servers.

Posted 3 months ago #
shann

offline
Administrator

ok, no problem.

For my issue it's not python3 (3.9.22) but py3k (3.7.0).
I recheck required for packages i don't build on current except graphviz that required by imagemagick.
If remind i need to build py3k because graphviz failed to run with python3-dev, on temp chroot i have used to build lfs cross tool, i retry to build graphviz with python3 (3.9.22), seem build ok and imagemagick build also. I think i can don't rebuild it and remove py3k, py3k-dev from current, infact not used in others packages.

Posted 3 months ago #
shann

offline
Administrator

Hi,

Mass rebuild in progress, think remain ~100 packages to be build.
Globally all build correctly, sometime issue related to gcc 10 with "multiple definitions" error for few packages, patch available or need to add -fcommon on CFLAGS.

After need to build iso and test to my EeePC to ensure all work as expected before push stuff.
In preliminary test, notice that upgrade glibc 2.31 to 2.34 in place work without issue, same smooth when switch to glibc 2.31 from 2.28.

Posted 3 months ago #
shann

offline
Administrator

Mass rebuild for 1744 packages is done.

three changes reported :
- libpthread-stubs not rebuild, failed to build, seem packages required it can be build without (suspect with new glibc / gcc, not necessary since).
- py3k/py3k-dev removed, only graphviz required and can be build with python3
- gvfs-obexftp removed in 2.36.3

Now it's time to build iso and do tests on EeePC, check if all work as expected in live mode, and if upgrade from installed system smooth or not.

Posted 3 months ago #
gibor

offline
Moderator

Globally all build correctly, sometime issue related to gcc 10 with "multiple definitions" error for few packages, patch available or need to add -fcommon on CFLAGS.

Hi, to correct the error in gcc 10 I also use another method: during compilation, when “multiple definitons” appears, it also appears where the second definition of that argument is. At that point, step by step, you can edit the sources by inserting “extern” in those lines.

Posted 3 months ago #
shann

offline
Administrator

Hi gibor,

Infact if i check patch, for fews add "extern".

For my tests on EeePC it's great.
Upgrade in place on livecd OK
Upgrade in place on hard disk OK

For both it's smooth, we update glibc-base/gcc-lib-base first and all packages after.
Tests i do all default apps work and other also.

I notice little issue but not directly related to new stack, it's for my laptop with amdgpu.
Infact libglvnd installed by default for tazweb required libGL.so.1, but in my case need to be remove clash with mesa, and block glamoregl initialisation

Posted 3 months ago #
shann

offline
Administrator

Hi,

Repo of current64 is up to date now, and iso are rebuild.

https://people.slitaz.org/~shann/slitaz-current64-stuff/slitaz-current64-base64-grub2.iso
https://people.slitaz.org/~shann/slitaz-current64-stuff/slitaz-current64-core64-grub2.iso

Need to update my local current chroot and rebuild packages/iso and push them on mirror.
On tank glibc can't rebuild correctly (i think due of kernel 3.x)

Posted 3 months ago #
gibor

offline
Moderator

Small test for the version of Shann https://people.slitaz.org/~shann/slitaz-current64-stuff/slitaz-current64-core64-grub2.iso used to build a wifi printer server on the usual tablet with Baytrail: first difficulty was missing the hostapd package. Built from source and onward.
Attempted to install firefox, but it was unavailable on the repos. Installed a version of mine that I was already using at 64bit, and it asks me for gtk-3. It is available and I install it with tazpkg normally. On reboot black screen... so after the first few tries I find nothing to do to fix it.
I reset the installation and restart giving up firefox which was superfluous in this case.
Replacing the kernel with my 5.15.0 which already contained what was needed for audio, video, and keys. I also add the full firmware package just so there are no surprises.
Packages: cups, xsane and some scripts the server works fine. It shares printers and scanners in wifi network with a fixed ip.
Congratulations Shann, not bad for a temporary build!

--------------------------------------------------------------------------

Piccolo test per la versione di Shann https://people.slitaz.org/~shann/slitaz-current64-stuff/slitaz-current64-core64-grub2.iso utilizzata per la creazione di un server printer in wifi sul solito tablet con il Baytrail: prima difficoltà mancava il pacchetto hostapd. Costruito dai sorgenti e avanti.
Tentativo di installare firefox, ma risultava non disponibile sui repo. Installato una mia versione che già utilizzavo a 64bit, e mi chiede gtk-3. È disponibile e lo installo con tazpkg normalmente. Al riavvio schermo nero... così dopo i primi tentativi non trovo nulla da fare per risolvere.
Azzero l'installazione e riparto rinunciando a firefox che era superfluo in questo caso.
Sostituzione del kernel con il mio 5.15.0 che conteneva già quello che serviva per l'audio, il video, ed i tasti. Aggiungo pure il pacchetto firmware completo tanto per non avere sorprese.
Pacchetti: cups, xsane ed alcuni script il server funziona bene. Condivide stampanti e scanner in rete wifi con un ip fisso.
Complimenti Shann, non male per essere una build provvisoria!

Posted 2 months ago #

RSS feed for this topic

« Previous 1…394041 42 Next »

Reply »

You must log in to post.

[Current version dev thread] - Usage of SliTaz 4.0 / rolling

Attachments

Reply »