SliTaz Forum
You are not logged in.
slitaz-rolling-core64.iso 2014-Aug-24 03:30:12
No net/ethernet modules?
4. eth0: No such device
tux@slitaz:~$ grep -A 5 network /var/log/boot.log
[..]
ifconfig: SIOCGIFFLAGS: No such device
Starting udhcpc client on: eth0...
udhcpc: SIOCGIFINDEX: No such device
5. linux64-3.2.53
tux@slitaz:~$ ls -l /lib/modules/3.2.53-slitaz64/kernel/drivers/net
total 0
drwxr-xr-x 23 root root 700 Aug 19 10:56 wireless
1.
tux@slitaz:~$ busybox modprobe -l | wc -l
301
tux@slitaz:~$ busybox modprobe -l | grep ethernet
tux@slitaz:~$ busybox modprobe -l | grep phy
tux@slitaz:~$
2. only linux-wireless modules
tux@slitaz:~$ ls -l /lib/modules/3.2.53-slitaz64/kernel/drivers/net/
total 0
drwxr-sr-x 23 root users 700 Aug 22 07:04 wireless
3. modules64.list
http://cook.slitaz.org/cooker.cgi?stuff=linux64/stuff/modules64.list
[..]
drivers/net/ethernet/3com/3c574_cs.ko.xz
drivers/net/ethernet/3com/3c589_cs.ko.xz
drivers/net/ethernet/8390/axnet_cs.ko.xz
drivers/net/arcnet/arcnet.ko.xz
drivers/net/arcnet/com20020.ko.xz
drivers/net/arcnet/com20020_cs.ko.xz
drivers/net/ethernet/fujitsu/fmvj18x_cs.ko.xz
drivers/net/ethernet/amd/nmclan_cs.ko.xz
drivers/net/ethernet/8390/pcnet_cs.ko.xz
drivers/net/ethernet/smsc/smc91c92_cs.ko.xz
drivers/net/ethernet/xircom/xirc2ps_cs.ko.xz
drivers/net/phy/broadcom.ko.xz
drivers/net/phy/cicada.ko.xz
drivers/net/phy/davicom.ko.xz
drivers/net/phy/libphy.ko.xz
drivers/net/phy/lxt.ko.xz
drivers/net/phy/marvell.ko.xz
drivers/net/phy/qsemi.ko.xz
drivers/net/phy/smsc.ko.xz
drivers/net/ethernet/dnet.ko.xz
drivers/net/ethernet/silan/sc92031.ko.xz
drivers/net/ethernet/sis/sis190.ko.xz
drivers/net/ethernet/marvell/skge.ko.xz
drivers/net/ethernet/marvell/sky2.ko.xz
drivers/net/ethernet/adaptec/starfire.ko.xz
drivers/net/ethernet/sun/sungem.ko.xz
drivers/net/sungem_phy.ko.xz
drivers/net/ethernet/sun/sunhme.ko.xz
drivers/net/ethernet/broadcom/tg3.ko.xz
drivers/net/ethernet/dec/tulip/tulip.ko.xz
drivers/net/ethernet/dec/tulip/uli526x.ko.xz
drivers/net/ethernet/3com/typhoon.ko.xz
drivers/net/usb/asix.ko.xz
drivers/net/usb/cdc_ether.ko.xz
drivers/net/usb/cdc_subset.ko.xz
drivers/net/usb/net1080.ko.xz
[..]
Offline
I have tested on this one laptop with Intel Core I3 + dual Grafik (Intel + Nvidia) all 3 rolling versions
1) SliTaz-rolling / 2) SliTaz-rolling-10in1 / 3) SliTaz-rolling-Core64
in Version 1) - I could install intel grafic card with tazx
in Version 2+3) X does not start with installed intel drivers, because there is an error in i915
so the i915 package seems to have a crosscompilation error
may I ask the question - is it really worth all this work on cross compilation?
would it not be more easy to set up an extra wok for 64bit version? Sorry, maybe the question is stupid, but Imust ask it now
Offline
8. Cook summary
http://cook.slitaz.org/cooker.cgi?pkg=linux
Summary for: linux64 3.2.53
Files : 16
Summary for: linux 3.2.53
Files : 337
Cook date : 2014-08-19 10:18
slitaz-rolling-core64.iso 2014-Aug-24 03:30:12
http://forum.slitaz.org/topic/question-about-50/page/2#post-33300
1.
tux@slitaz:~$ busybox modprobe -l | wc -l
301
1. linux64-3.2.53 and linux-3.2.53 diff ~36 kernel modules
tux@slitaz:~$ calc 337-301
36
2. i915 depends
tux@slitaz:~$ modinfo i915 | grep depends
depends: drm,drm_kms_helper,intel-gtt,i2c-core,video,button,i2c-algo-bit,intel-agp
3. Module drm,i2c-core,video,button... not found
tux@slitaz:~$ modinfo drm
modinfo: ERROR: Module drm not found.
tux@slitaz:~$ modinfo drm_kms_helper
modinfo: ERROR: Module drm_kms_helper not found.
tux@slitaz:~$ modinfo i2c-core
modinfo: ERROR: Module i2c-core not found.
tux@slitaz:~$ modinfo i2c-algo-bit
modinfo: ERROR: Module i2c-algo-bit not found.
tux@slitaz:~$ modinfo video
modinfo: ERROR: Module video not found.
tux@slitaz:~$ modinfo button
modinfo: ERROR: Module button not found.
tux@slitaz:~$
Offline
6. linux64/files.list
tux@slitaz:~$ cat /var/lib/tazpkg/installed/linux64/files.list
/boot/vmlinuz-3.2.53-slitaz64
[..]
/lib/modules/3.2.53-slitaz64/modules.devname
/lib/modules/3.2.53-slitaz64/kernel/drivers/char/rtc.ko.xz
/lib/modules/3.2.53-slitaz64/kernel/drivers/char/genrtc.ko.xz
/lib/modules/3.2.53-slitaz64/kernel/drivers/ide/ide-cs.ko.xz
/lib/modules/3.2.53-slitaz64/kernel/lib/libcrc32c.ko.xz
/lib/modules/3.2.53-slitaz64/modules.builtin
1. linux64-3.2.53 and linux-3.2.53 diff ~36 kernel modules
tux@slitaz:~$ calc 337-301
36
Should be diff 330 kernel modules
tux@slitaz:~$ calc 334-4
330
1. slitaz-rolling-core64.iso 07-Sep-2014
tux@slitaz:~$ uname -a
Linux slitaz 3.2.53-slitaz64 #2 SMP Tue Aug 19 07:22:20 Europe 2014 x86_64 GNU/Linux
tux@slitaz:~$ busybox modprobe -l | wc -l
301
It includes linux64, linux64-agp, linux64-crypto, linux64-drm, linux64-sound and linux64-wireless.
tux@slitaz:~$ tazpkg list | grep linux64
linux64 3.2.53 base-system
linux64-agp 3.2.53 base-system
linux64-crypto 3.2.53 base-system
linux64-drm 3.2.53 base-system
linux64-sound 3.2.53 base-system
linux64-wireless 3.2.53 base-system
2.
tux@slitaz:~$ grep ko.xz /tmp/linux-3.2.53/files.list | wc -l
334
tux@slitaz:~$ grep ko.xz /var/lib/tazpkg/installed/linux64/files.list | wc -l
4
tux@slitaz:~$ grep ko.xz /var/lib/tazpkg/installed/linux64-agp/files.list | wc -l
5
tux@slitaz:~$ grep ko.xz /var/lib/tazpkg/installed/linux64-crypto/files.list | wc -l
49
tux@slitaz:~$ grep ko.xz /var/lib/tazpkg/installed/linux64-drm/files.list | wc -l
14
tux@slitaz:~$ grep ko.xz /var/lib/tazpkg/installed/linux64-sound/files.list | wc -l
129
tux@slitaz:~$ grep ko.xz /var/lib/tazpkg/installed/linux64-wireless/files.list | wc -l
101
tux@slitaz:~$ calc 301-4-5-49-14-129-101
-1
tux@slitaz:~$
3. duplicate module: rtc.ko.xz
tux@slitaz:~$ grep rtc.ko /var/lib/tazpkg/installed/linux64/files.list
/lib/modules/3.2.53-slitaz64/kernel/drivers/char/rtc.ko.xz
/lib/modules/3.2.53-slitaz64/kernel/drivers/char/genrtc.ko.xz
tux@slitaz:~$ grep rtc.ko /var/lib/tazpkg/installed/linux64-sound/files.list
/lib/modules/3.2.53-slitaz64/kernel/drivers/char/rtc.ko.xz
tux@slitaz:~$
Offline
linux: update config64
1.
wok changeset 17268:0d2eae483216 tip
linux: update config64
http://hg.slitaz.org/wok/rev/0d2eae483216
author Pascal Bellard <pascal.bellard@slitaz.org>
date Thu Oct 23 19:09:03 2014 +0200 (14 hours ago ago)
parents b9fafbaeb4c6
children
files linux/stuff/linux-slitaz.config linux/stuff/linux-slitaz.config64
2.
tux@slitaz:~$ uname -a
Linux slitaz 3.2.53-slitaz64 #2 SMP Thu Oct 23 19:13:12 Europe 2014 x86_64 GNU/Linux
3.
tux@slitaz:~$ lsmod
Module Size Used by Not tainted
ipv6 226737 22
i915 310726 2
video 11362 1 i915
i2c_algo_bit 4368 1 i915
drm_kms_helper 21202 1 i915
drm 154213 2 i915,drm_kms_helper
intel_agp 10400 1 i915
i2c_core 15927 4 i915,i2c_algo_bit,drm_kms_helper,drm
wmi 7235 0
intel_gtt 11831 3 i915,intel_agp
agpgart 22932 3 drm,intel_agp,intel_gtt
button 4167 1 i915
sky2 43332 0
snd_hda_codec_idt 47244 1
snd_hda_intel 20389 4
snd_hda_codec 56353 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 5117 1 snd_hda_codec
snd_pcm 57218 3 snd_hda_intel,snd_hda_codec
snd_page_alloc 5929 2 snd_hda_intel,snd_pcm
snd_timer 15484 2 snd_pcm
snd 47500 12 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 4449 1 snd
4.
tux@slitaz:~$ modinfo sky2
filename: /lib/modules/3.2.53-slitaz64/kernel/drivers/net/ethernet/marvell/sky2.ko.xz
version: 1.30
license: GPL
author: Stephen Hemminger <shemminger@linux-foundation.org>
description: Marvell Yukon 2 Gigabit Ethernet driver
srcversion: 5DDAC670BE11093F69B7FFC
alias: pci:v000011ABd00004381sv*sd*bc*sc*i*
[..]
alias: pci:v00001148d00009E00sv*sd*bc*sc*i*
alias: pci:v00001148d00009000sv*sd*bc*sc*i*
depends:
intree: Y
vermagic: 3.2.53-slitaz64 SMP mod_unload
parm: debug:Debug level (0=none,...,16=all) (int)
parm: copybreak:Receive copy threshold (int)
parm: disable_msi:Disable Message Signaled Interrupt (MSI) (int)
parm: legacy_pme:Legacy power management (int)
5.
tux@slitaz:~$ sudo lspci -v | grep -A 15 Ether
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller (rev 10)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 4001
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
I/O ports at e800 [size=256]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: [48] Power Management version 3
Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [c0] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [130] Device Serial Number fe-9e-bf-ff-xx-xx-xx-xx
Kernel driver in use: sky2
6.
tux@slitaz:~$ dmesg | grep eth
sky2 0000:02:00.0: eth0: addr 00:30:1b:xx:xx:xx
sky2 0000:02:00.0: eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
tux@slitaz:~$
Offline
VGA - Intel i915 ( 1920x1080 )
i915 310726 2
video 11362 1 i915
i2c_algo_bit 4368 1 i915
drm_kms_helper 21202 1 i915
drm 154213 2 i915,drm_kms_helper
intel_agp 10400 1 i915
i2c_core 15927 4 i915,i2c_algo_bit,drm_kms_helper,drm
wmi 7235 0
intel_gtt 11831 3 i915,intel_agp
agpgart 22932 3 drm,intel_agp,intel_gtt
button 4167 1 i915
1.
tux@slitaz:~$ modinfo i915
filename: /lib/modules/3.2.53-slitaz64/kernel/drivers/gpu/drm/i915/i915.ko.xz
license: GPL and additional rights
description: Intel Graphics
author: Tungsten Graphics, Inc.
license: GPL and additional rights
alias: pci:v00008086d0000016Asv*sd*bc03sc*i*
[..]
alias: pci:v00008086d00003577sv*sd*bc03sc*i*
depends: drm,drm_kms_helper,intel-gtt,i2c-core,video,button,i2c-algo-bit,intel-agp
intree: Y
vermagic: 3.2.53-slitaz64 SMP mod_unload
parm: invert_brightness:Invert backlight brightness (-1 force normal, 0 machine defaults, 1 force inversion), please report PCI device ID, subsystem vendor and subsystem device ID to dri-devel@lists.freedesktop.org, if your machine needs it. It will then be included in an upcoming module version. (int)
parm: modeset:Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, 1=on, -1=force vga console preference [default]) (int)
parm: fbpercrtc:int
parm: panel_ignore_lid:Override lid status (0=autodetect [default], 1=lid open, -1=lid closed) (int)
parm: powersave:Enable powersavings, fbc, downclocking, etc. (default: true) (int)
parm: semaphores:Use semaphores for inter-ring sync (default: -1 (use per-chip defaults)) (int)
parm: i915_enable_rc6:Enable power-saving render C-state 6 (default: -1 (use per-chip default) (int)
parm: i915_enable_fbc:Enable frame buffer compression for power savings (default: -1 (use per-chip default)) (int)
parm: lvds_downclock:Use panel (LVDS/eDP) downclocking for power savings (default: false) (int)
parm: lvds_use_ssc:Use Spread Spectrum Clock with panels [LVDS/eDP] (default: auto from VBT) (int)
parm: vbt_sdvo_panel_type:Override selection of SDVO panel mode in the VBT (default: auto) (int)
parm: reset:Attempt GPU resets (default: true) (bool)
parm: enable_hangcheck:Periodically check GPU activity for detecting hangs. WARNING: Disabling this can cause system wide hangs. (default: true) (bool)
2.
tux@slitaz:~$ sudo lspci -v | grep -A 10 VGA
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 4001
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fe400000 (64-bit, non-prefetchable) [size=4M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
I/O ports at dc00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: i915
3.
tux@slitaz:~$ dmesg | grep -e i915 -e drm
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
[drm] MTRR allocation failed. Graphics performance may suffer.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
fbcon: inteldrmfb (fb0) is primary device
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
4.
tux@slitaz:~$ grep -A 10 slitaz64 /var/log/Xorg.0.log
[ 6.243] Current Operating System: Linux slitaz 3.2.53-slitaz64 #2 SMP Thu Oct 23 19:13:12 Europe 2014 x86_64
[ 6.243] Kernel command line: root=/dev/sda6 autologin
[ 6.243] Build Date: 22 March 2013 08:40:16AM
[ 6.243]
[ 6.243] Current version of pixman: 0.28.2
[ 6.243] Before reporting problems, check http://www.slitaz.org/
to make sure that you have the latest version.
[ 6.243] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.243] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 25 08:36:56 2014
5.
tux@slitaz:~$ grep -A 5 FBDEV\(1 /var/log/Xorg.0.log
[ 6.324] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[ 6.324] (II) FBDEV(1): using default device
[ 6.324] (==) FBDEV(1): Depth 24, (==) framebuffer bpp 32
[ 6.324] (==) FBDEV(1): RGB weight 888
[ 6.324] (==) FBDEV(1): Default visual is TrueColor
[ 6.324] (==) FBDEV(1): Using gamma correction (1.0, 1.0, 1.0)
[ 6.324] (II) FBDEV(1): hardware: inteldrmfb (video memory: 8100kB)
[ 6.324] (II) FBDEV(1): checking modes against framebuffer device...
[ 6.324] (II) FBDEV(1): checking modes against monitor...
[ 6.324] (--) FBDEV(1): Virtual size is 1920x1080 (pitch 1920)
[ 6.324] (**) FBDEV(1): Built-in mode "current"
[ 6.324] (==) FBDEV(1): DPI set to (96, 96)
[ 6.324] (II) Loading sub module "fb"
[ 6.324] (II) LoadModule: "fb"
[ 6.324] (II) Loading /usr/lib/X11/modules/libfb.so
[ 6.329] (II) Module fb: vendor="X.Org Foundation"
[ 6.329] compiled for 1.12.1, module version = 1.0.0
--
[ 6.329] (**) FBDEV(1): using shadow framebuffer
[ 6.329] (II) Loading sub module "shadow"
[ 6.329] (II) LoadModule: "shadow"
[ 6.329] (II) Loading /usr/lib/X11/modules/libshadow.so
[ 6.330] (II) Module shadow: vendor="X.Org Foundation"
[ 6.330] compiled for 1.12.1, module version = 1.1.0
Offline
Audio - Intel HDA
snd_hda_codec_idt 47244 1
snd_hda_intel 20389 4
snd_hda_codec 56353 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 5117 1 snd_hda_codec
snd_pcm 57218 3 snd_hda_intel,snd_hda_codec
snd_page_alloc 5929 2 snd_hda_intel,snd_pcm
snd_timer 15484 2 snd_pcm
snd 47500 12 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 4449 1 snd
1.
tux@slitaz:~$ modinfo snd_hda_intel
filename: /lib/modules/3.2.53-slitaz64/kernel/sound/pci/hda/snd-hda-intel.ko.xz
description: Intel HDA driver
license: GPL
alias: pci:v00001022d*sv*sd*bc04sc03i00*
[..]
alias: pci:v00008086d00001C20sv*sd*bc*sc*i*
depends: snd-hda-codec,snd-pcm,snd,snd-page-alloc
intree: Y
vermagic: 3.2.53-slitaz64 SMP mod_unload
parm: index:Index value for Intel HD audio interface. (array of int)
parm: id:ID string for Intel HD audio interface. (array of charp)
parm: enable:Enable Intel HD audio interface. (array of bool)
parm: model:Use the given board model. (array of charp)
parm: position_fix:DMA pointer read method.(0 = auto, 1 = LPIB, 2 = POSBUF, 3 = VIACOMBO). (array of int)
parm: bdl_pos_adj:BDL position adjustment offset. (array of int)
parm: probe_mask:Bitmask to probe codecs (default = -1). (array of int)
parm: probe_only:Only probing and no codec initialization. (array of int)
parm: single_cmd:Use single command to communicate with codecs (for debugging only). (bool)
parm: enable_msi:Enable Message Signaled Interrupt (MSI) (int)
parm: power_save:Automatic power-saving timeout (in second, 0 = disable). (int)
parm: power_save_controller:Reset controller in power save mode. (bool)
parm: align_buffer_size:Force buffer and period sizes to be multiple of 128 bytes. (bool)
parm: snoop:Enable/disable snooping (bool)
2.
tux@slitaz:~$ sudo lspci -v | grep -A 10 Audio
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 4001
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at feaf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: snd_hda_intel
3.
tux@slitaz:~$ dmesg | grep snd
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [attachment=34524,1708]
Offline
CDROM
1.
tux@slitaz:~$ dmesg | grep -e hda -e 9660
hda: PIONEER DVD-RW DVR-K06RS, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2000kB Cache
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: IEEE_P1282
2.
tux@slitaz:~$ mount | grep cdrom
/dev/hda on /media/cdrom type iso9660 (ro,nosuid,nodev,noexec,relatime)
3.
tux@slitaz:~$ cat /media/cdrom/install.sh
#!/bin/sh
#
DIR=$(cd $(dirname $0); pwd)
[ -d /var/cache/tazpkg ] || mkdir -p /var/cache/tazpkg
ls -d $DIR/packages/* > /var/lib/tazpkg/mirror
ln -fs $DIR/packages/*/*.tazpkg /var/cache/tazpkg/
ln -fs $DIR/packages/*/packages.* /var/lib/tazpkg
ln -fs $DIR/packages/*/files.list.lzma /var/lib/tazpkg
[ -d /var/www ] || mkdir -p /var/www
ln -s $DIR/website /var/www
Offline
[ Generated in 0.022 seconds, 8 queries executed - Memory usage: 1.59 MiB (Peak: 1.77 MiB) ]