SliTaz Forum
You are not logged in.
Suite Firefox ESR + apulse : un fichier au format .opus est lu.
Mais, c'est bien le seul. :-)
À bientôt.
Offline
Hello,
Thanks je vois pour les ajouter et refaire les isos, en faisant un test de la core64, je viens de voir que j'ai loupé d'ajouter "gnome-themes-standard" pour le thème adwaita 
, ok pour la core.
Oui j'avais noté ce point.
Pour libpci, lié à pciutils qui n'est pas installé
Concernant libEGL / GLX, lié à la version de Mesa, car libEGL lui est présent (libegl-mesa).
Offline
Bonjour Shann,
Vu : merci.
Lors de l'utilisation de TazPanel/Paquets/Administration, je me suis rendu compte que le service DVD de paquets était arrété.
J'ai mis les doigts dans le fichier /var/www/tazpanel/pkgs.cgi afin de retirer cette partie afin qu'elle ne s'affiche plus.
Le TazPanel/Paquets/Administration avant :
[attachment=51778,3423]
Le TazPanel/Paquets/Administration après :
[attachment=51778,3424]
Le fichier pkgs.cgi est joint avec une extension fantoche .txt à supprimer. :-).
Bien sûr, il ne s'agit que d'une proposition à vérifier et à valider, ou à laisser tomber :-).
Bon dimanche.
Amitiés.
Offline
Hello,
Sorry but this week think can't be work correctly on project.
Issue again with my provider (same for box/phone), no internet, no mobile, work with 4G shared pro on-call mobile.
Keep Datas for work and my on-call week.
No ETA at time for recovery services, only infos i have, all antenna down, seem keep one up (in outdoor i receive very poor signal, but can be call), for ffth/adsl, outage NRO/NRA for my city and other around.
Offline
Hi 
Just retrieve fiber connection, and mobile line.
I relaunch build isos, lost connection during process sunday.
@Rantanplan, for Packages DVD service, i think related to cron task i don't see on tank for "current". In fact it's enable for cooking.
Offline
Bonjour Shann,
vu et merci.
Amitiés
Offline
Hi,
Off today, i successfully build webkit2gtk and midori 9.
webkit2gtk required mesa > 9 and gcc >= 7.0.0 (to test i build recent mesa and gcc83/gcc83-lib-base)
midori work but failed for display few sites (log talk about libEGL / swrast).
(midori:9464): GLib-GObject-WARNING **: 12:05:11.491: ../gobject/gbinding.c:469: Unable to convert a value of type gpointer to a value of type CairoSurface
libEGL warning: DRI2: failed to authenticate
libEGL warning: DRI2: failed to open swrast (search paths /usr/lib/dri)
libEGL warning: DRI2: failed to open swrast (search paths /usr/lib/dri)
EGLDisplay Initialization failed: EGL_NOT_INITIALIZED
Cannot create EGL sharing context: invalid display (last error: EGL_SUCCESS)
(midori:9464): GLib-GObject-WARNING **: 12:05:32.760: ../gobject/gbinding.c:469: Unable to convert a value of type gpointer to a value of type CairoSurface
In case i just quick test, need to build this in sanity step and implied to bump in gcc 8.3 at least.
[attachment=51785,3426]
Offline
Hi shann,
[*]F# key twice: maybe due at my hardware? But I can't test it on an other computer at this moment; this is not really a problem for me.
[*][c]packages.list[/c] not downloaded: disappeared with a new rootfs built from the ISO 20231030 (previous was built from 20231016).
[*]background in Xorg: I didn't find; IMO openbox manages only windows; but not important.
[*]I did change the mirror when I saw that [c]tazpkg up[/c] never updated my packages 
[*][c]xorg-xf86-video-nouveau[/c] and [c]xorg-xf86-video-nouveau[/c] compiled fine; still have an error in [c]Xorg.0.log[/c]: [c][drm] Failed to open DRM device for pci:0000:01:00.0: -19[/c] but no matter.
What I've noticed in justX
[*][c]tazweb[/c] installs
[c]libsoup248[/c] but then claims about [c]libsoup-2.4.so.1[/c] (package [c]libsoup[/c]);
[*][c]libwebkit[/c] but then claims about [c]libwebkitgtk-1.0.so.0[/c] (package [c]webkitgtk[/c]);
[*]gst-plugins-base, but then claims about l and libgstapp-1.0.so.0, [c]libgstfft-1.0.so.0[/c] (package [c]gst-plugins-base-1.0[/c])
and claims also about
[*][c]libsecret-1.so.0[/c] (package [c]libsecret[/c]),
[*][c]libGL.so.1[/c] (package [c]mesa[/c],)
[*][c]libEGL.so.1[/c] (package [c]ligegl-mesa[/c]),
[*][c]libwebp.so.7[/c] (package [c]libwebp[/c]),
[*][c]libatomic.so.1[/c] (package [c]libatomi[/c])
After installing all the missing deps and removing [c]libsoup248[/c], [c]libwebkit[/c] and replacing [c]gstreamer[/c] and [c]gst-plugins-base[/c] with [c]gstreamer-1.0[/c] and [c]gst-plugins-base-1.0[/c], [c]tazweb[/c] works like a charm.
Shouldn't we add some depends in the tazweb receipt? even if I know it's not conventional to use justX to install apps.
[*][c]tazpanel[/c] refuses to work: [c]Could not connect: Connexion refused[/c]
Tested through another web browser (Lynx):
[c]http://127.0.0.1:82/index.cgi?guiuser=root
Looking up 127.0.0.1:82
Making HTTP connection to 127.0.0.1:82
Alert! Unable to connect to remote host
lynx: Can't access startfile http://127.0.0.1:82/index.cgi?guiuser=root[/c]
I don't think it's a problem in tazpanel but rather something missing in my rootfs.
Offline
Hi Ceel,
Normally tazweb has been compiled with libsoup248 / libwebkit and to avoid clash with libsoup / webkitgtk (webkit2gtk soon), each have own path (/usr/libsoup248, /usr/libwebkit).
And tazweb have LD_LIBRARY_PATH to use it.
Need check justX flavor, and how issue appear.
Concerning packages, when build iso, i always push packages in my space :
https://people.slitaz.org/~shann/slitaz-current-stuff/packages
Offline
test with justX,
install tazpanel, tazweb.
tazpanel not running, by default, need start :
[c]/etc/init.d/tazpanel start[/c]
With this command tazweb run :
[c]LD_LIBRARY_PATH=/usr/libsoup248:/usr/libwebkit tazweb[/c]
I adjust .config/slitaz/applications.conf, by default BROWSER set to retawq, change to tazweb, restart xterm, [c]tazpanel[/c] command work as expected.
Offline
Bonjour Shann,
chargé et lancé la build du 20231107 : RAS ou tout est bon à ce point d'avancement. Merci !
À bientôt.
Amitiés à l'équipe de Dév'
Offline
Hi shann,
receipt - mesa.SlackBuild
I begin stuff to ensure we have stable and recent version.
In case i compare current wok versions with Slackware 15.0, because it's more conservative in upgrade and keep security in mind.
For xorg stuff, i check also with 14.2 for proto packages (15.0 have 2021.5 metapackage)
On all packages build on current, we have 1018 it's same version (it's include also only slitaz pkg), 136 remain. Seem good point
40 UPDATED
24 SKIP because need major upgrade as Mesa / Xorg / GCC / Glibc / Kernel
72 need to check
Index of /slackware/slackware-15.0/source/x/mesa
Name Last modified Size Description
Parent Directory -
doinst.sh.gz 2018-12-07 20:28 388
get-mesa.sh 2015-12-11 04:09 720
mesa-21.3.5.tar.xz 2022-01-26 19:56 16M
mesa-21.3.5.tar.xz.sig 2022-01-26 19:56 329
mesa-demos-8.4.0.tar.lz 2018-02-23 09:54 6.9M
mesa.SlackBuild 2022-01-28 21:22 6.9K
mesa.url 2010-10-01 06:23 78
patches-revert/ 2021-03-12 02:31 -
patches/ 2021-10-15 19:57 -
slack-desc 2019-09-25 21:15 814
https://slackware.nl/slackware/slackware-15.0/source/x/mesa/
Offline
Hi,
Normally tazweb has been compiled with libsoup248 / libwebkit and to avoid clash with libsoup / webkitgtk (webkit2gtk soon), each have own path (/usr/libsoup248, /usr/libwebkit).
And tazweb have LD_LIBRARY_PATH to use it.
With this command tazweb run :
LD_LIBRARY_PATH=/usr/libsoup248:/usr/libwebkit tazweb
8.5.2.3. Configuring the Dynamic Loader
By default, the dynamic loader (/lib/ld-linux.so.2) searches through /usr/lib for dynamic libraries that are needed by programs as they are run. However, if there are libraries in directories other than /usr/lib, these need to be added to the /etc/ld.so.conf file in order for the dynamic loader to find them. Two directories that are commonly known to contain additional libraries are /usr/local/lib and /opt/lib, so add those directories to the dynamic loader's search path.
....
https://www.linuxfromscratch.org/lfs/view/11.2/chapter08/glibc.html#contents-glibc
Offline
Hi,
@Rantanplan, nice to read this.
@Alanyih,
Infact for mesa in first step i don't upgrade it.
For ld.so.conf, i don't sure it's best idea, infact only tazweb need libsoup/libwebkit.
Core apps, others apps depend on it.
I have update toolchain with gcc 8.3.0, glibc 2.28, also bump mesa to 21.3.5, also rebuild kernel with last minor revision 4.19.298.
Rebuild apps in progress.
I also note to build kernel pae
Offline
Hi shann,
[c]/etc/init.d/tazpanel start[/c]... of course
I even didn't think to check it thinking [c]tazpanel[/c] was started after its installation 
Should it a good idea to add it in a [c]post_install()[/c] function in the receipt?
[c]tazweb[/c] runs well without [c]libsoup248[/c] and [c]libwebkit[/c]and without using [c]LD_LIBRARY_PATH[/c]; but frankly I didn't tested it really deeply.
Otherwise, no issue with the apps tested. Just a problem with Cups but not relative to the Current justX ISO. I meet the same issue with Rolling; I need to investigate more.
By the way, [c]libcomerr3[/c] shouldn't provide [c]libcomerr[/c], see this post: https://forum.slitaz.org/topic/is-libcomerr3-correctly-built#post-51095
P.S. I don't use the new ISO to do tests; I update and save regularly my rootfs (built from ISO 20231030) if there are changes. This shouldn't do any differences and I think I remain entirely consistent with your (excellent!) work.
Have a nice day.
Offline
@shann,
Make good use of default search path /usr/lib
Offline
Hi,
@ceel, note for libcomerr3. i updated receipt.
For tazpanel need check for post_install.
Concerning tazweb/tazpanel, issue appear for basic auth.
with new libsoup / webkitgtk, no register root authent and ask for each page, but with legacy webkitgtk/libsoup it's work.
@alanyih, infact, i think keep libsoup248 / libwebkit inside /usr/lib, midori 9.0 unstable on my side, need investigate or switch to other light browser.
At time i not rebuild iso, need finish rebuild remain packages before (~120).
Below, my EeePC with epiphany browser with webkit2gtk, and all updates (glibc 2.28 / gcc 8.3.0 / mesa 21)
Continue to improve and test.
For curious i push all packages in https://people.slitaz.org/~shann/slitaz-current-stuff/packages-incoming/
/////!!!!!!!! WARNING !!!!!!!!!\\\\\\\
Due of new glibc / gcc, FIRST INSTALL glibc-base and gcc-lib-base before use 'tazpkg up'
/////!!!!!!!! WARNING !!!!!!!!!\\\\\\\
[attachment=51798,3428]
Offline
Concerning Midori 9.
Interesting think, (segfault appear when try to clear private data).
If select only history, no segfault
If select Cookie or web cache, segfault appear
Offline
Up with nice news .
For segfault, seem issue already open for midori about clear private data.
Below, midori with video running on my eeepc \o/.
Need find for fix glitch about theme/icons miss.
[attachment=51800,3432]
Offline
Hi,
Test also on my dell x300, little victory, infact blank screen, but i use space to expect run video, it's work during few seconds, due of overload cpu (maybe also ram), "oops page" appear.
Infact, pentium M 1Ghz monocore, 1G ddr, need tweak.
Continue test and improve to ensure work as expected and don't forget anything.
Offline
Hi,
When try to prepare new iso for core64, i found major issue no see before (i set only french keyboard).
Boot, set local fr, issue about i18n_ctype no such file or directory.
menu is french, desktop / apps remain en.
with iso build 20231107 (with gcc 6.3.0 / glibc 2.23), no issue occured
Offline
Hi,
Fix locale issue.
I check glibc/install folder and see we have i18n_ctype file not include in wanted-files.list, i put them, no better, when search again and forum talk about to ensure /usr/share/i18n not exclude but also to reboot.
In my case, i just reinstall glibc-base but not reboot, rebuild iso and test it, locales work .
Offline
Hi shann,
Just switched to packages-incoming, updated my rootfs and... X works!
Did you change something into the kernel? I didn't take time to have a look at it.
So, now I'll be able to test the next Core ISO
Offline
[ Generated in 0.018 seconds, 7 queries executed - Memory usage: 1.6 MiB (Peak: 1.77 MiB) ]