SliTaz Forum

USB WiFi not working

(6 posts) (2 voices)

• Started 10 years ago by Rumav
• Latest reply from Rumav
• This topic is not a support question

Tags:

No tags yet.

1. 

   Rumav
   

   offline

   Member

   Hi, I'm a new user of SliTaz 4.0 and linux in general. I'm very happy with this OS, but my problem is my wireless internet connection doesn't work.

   I have a wireless USB TP-LINK TL-WN722N model adapter. I spend several hours searching in google and trying to get it working, downloading usbutils, chipset firmware, modprobe, subox wifibox. I ended with a mess and finally gave up.

   lsusb 0cf3:9271
   https://wikidevi.com/wiki/TP-LINK_TL-WN722N

   If anyone could help me I would be very appreciated.

   Thanks for your time!.

   Posted 10 years ago #
2. 

   sixofeight
   

   offline

   Member

   Hi Rumav
   I have the same chipset and it works flawlessly if you use the
   ar9271.fw (md5sum 2e6f5045ec4c5a42bb93ced242bad0ba ) Firmware File.
   Place it in /lib/firmware/
   Don't take the "htc_" Firmware, won't work.
   EDIT:
   here is the link to the Firmware package
   http://forum.slitaz.org/topic/netgear-wna1100?bb_attachments=22182&bbat=1000

   Posted 10 years ago #
3. 

   Rumav
   

   offline

   Member

   Thank you very much for your reply sixofeight.
   I did what you said, download the firmware package and install it. I went to lib/firmware to make sure the ar9271.fw file were there also.
   But for some reason wifi doesn't work yet.

   My network.conf looks like:

   INTERFACE="wlan0"
   DHCP="yes"
   STATIC="no"
   IP="192.168.1.6"
   NETMASK="255.255.255.0"
   GATEWAY="192.168.1.1"
   DNS_SERVER="192.168.1.1"
   WIFI="yes"
   WIFI_INTERFACE="wlan0"
   WIFI_ESSID="any"
   WIFI_MODE="managed"
   WIFI_KEY=""
   WIFI_KEY_TYPE="none"
   WIFI_IWCONFIG_ARGS=""

   I tried /etc/init.d/network.sh restart command, and this is what appears in console:

   Stopping all interfaces
   ifconfig: SIOCGIFFLAGS: No such device
   ifconfig: SIOCGIFFLAGS: No such device
   Killing all deamons
   killall: udhcpc: no process killed
   wlan0 No such device

   ifconfig: SIOCGIFFLAGS: No such device
   ifconfig: SIOCGIFFLAGS: No such device
   wlan0 is not a wifi interface, changing it.
   Configuring ...lo no wireless extensions.

   dummy0 no wireless extensions.

   eth0 no wireless extensions.

   iwconfig: unknown command "any"
   Starting udhcpc client on: ...
   udhcpc: SIOCGIFFLAGS: No such device

   Usb adapter is well conected to port. I go to the Tazpanel/Network/wireless I press start button and then scan, scan result is empty.

   What should I do?, can you give some advice?, if you need more information please don't hesitate to ask me.

   Thanks for your time and support!.

   ~~~~~~~~~~~~~~~~~ Edit:
   iwconfig output:
   lo no wireless extensions
   dummy0 no wireless extensions
   eth0 no wireless extensions

   lsusb output:
   Bus 001 Device 001: ID 1d6b:0001
   Bus 001 Device 002: ID 0cf3:9271

   Posted 10 years ago #
4. 

   sixofeight
   

   offline

   Member

   Hi
   ok..step by step....
   pull out the usb-wifi > reboot > plug in again > open terminal,
   type ifconfig -a ,do you have a wlan0 ?

   One Question:
   do you have Slitaz installed on a flash-drive or HDD; or do you use a Live-CD?
   because the firmware must be present before the usb-wifi is detected and configured.

   btw.your network.conf is lacking the credentials for your network

   Posted 10 years ago #
5. 

   sixofeight
   

   offline

   Member

   part 2

   If you have a wlan0:
   3 ways to configure your network

   If your network is WPA secured: (doesn't work with WEP )
   go to menu > System Tools > wifi configuration > doubleclick your network
   and put in the key

   or open SliTaz-panel > Network > wireless, you should see some Networks,
   click on your's > under Connection put in your key and click Configure

   or open /etc/network.conf (as root) and edit
   # Wifi connection.
   # Enable/disable wireless connection at boot time.
   WIFI="yes"

   # Wifi interface (iwconfig) and ESSID.
   WIFI_INTERFACE="wlan0"
   WIFI_ESSID="YOUR NETWORK NAME"
   WIFI_MODE="managed"
   WIFI_KEY="YOUR KEY"
   WIFI_KEY_TYPE="WPA OR WEP"
   WPA_DRIVER=""
   WIFI_CHANNEL=""
   WIFI_IWCONFIG_ARGS=""

   after that open a terminal su to root and type /etc/init.d/network.sh start

   btw.If you can't find your network but other ones, open a Terminal and type
   iwlist channel
   to see the available channels.your AP should use one of them.
   (I once had the Problem that my AP was on channel 13 but my usb-wifi gave me
   only the channels 1-11)

   Posted 10 years ago #
6. 

   Rumav
   

   offline

   Member

   Thank you very much sixofeight!, now wifi is working and I can browse the internet.
   It worked at the first time, seem easy, I don't know what I did wrong yesterday :P

   Thanks! <3

   Posted 10 years ago #

RSS feed for this topic

Reply

You must log in to post.