not resolved
calixtus06
offlineMember
hello,
One of my very ol laptop pc is a toshiba satellite pro, pentium 4 ( meuh ) 2,80 ghz, hard disk=40 go, 256 ram.
I thought for gparted: 4 go for / , 500 mo for swap and the rest for hom. What do you think about ?
I would like to use smtube to see video, midori to search, abiword to write
Thanks by advance
Nico, newbee from france
calixtus06
offlineMember
(e it overlaps 0000:00:1f.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:08: disabling [io 0x0030-0x0031 disabled] because it overlaps 0000:00:1f.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:08: disabling [io 0x0034-0x0035 disabled] because it overlaps 0000:00:1f.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:08: disabling [io 0x0038-0x0039 disabled] because it overlaps 0000:00:1f.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:08: disabling [io 0x003c-0x003d disabled] because it overlaps 0000:00:1f.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:08: disabling [io 0x0050-0x0053 disabled] because it overlaps 0000:00:1f.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:08: disabling [io 0x0063 disabled] because it overlaps 0000:00:1f.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:08: disabling [io 0x0065 disabled] because it overlaps 0000:00:1f.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:08: disabling [io 0x0072-0x0077 disabled] because it overlaps 0000:00:1f.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:08: disabling [io 0x0090-0x009f disabled] because it overlaps 0000:00:1f.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:08: disabling [io 0x00a4-0x00a5 disabled] because it overlaps 0000:00:1f.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:08: disabling [io 0x00a8-0x00a9 disabled] because it overlaps 0000:00:1f.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:08: disabling [io 0x00ac-0x00ad disabled] because it overlaps 0000:00:1f.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:08: disabling [io 0x00b0-0x00b5 disabled] because it overlaps 0000:00:1f.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:08: disabling [io 0x00b8-0x00b9 disabled] because it overlaps 0000:00:1f.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:08: disabling [io 0x00bc-0x00bd disabled] because it overlaps 0000:00:1f.6 BAR 0 [io 0x0000-0x00ff]
pnp 00:08: disabling [io 0x002e-0x002f disabled] because it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x0062 disabled] because it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x0066 disabled] because it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x0024-0x0025 disabled] because it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x0028-0x0029 disabled] because it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x002c-0x002d disabled] because it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x0030-0x0031 disabled] because it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x0034-0x0035 disabled] because it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x0038-0x0039 disabled] because it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x003c-0x003d disabled] because it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x0050-0x0053 disabled] because it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x0063 disabled] because it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x0065 disabled] because it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
pnp 00:08: disabling [io 0x0072-0x0077 disabled] because it overlaps 0000:00:1f.6 BAR 1 [io 0x0000-0x007f]
system 00:08: [io 0x01e0-0x01ef] has been reserved
system 00:08: [io 0x0480-0x048f] has been reserved
system 00:08: [io 0x0680-0x06ff] has been reserved
system 00:08: [io 0x0800-0x080f] has been reserved
system 00:08: [io 0xd800-0xd87f] could not be reserved
system 00:08: [io 0xd880-0xd89f] has been reserved
system 00:08: [io 0xd8a0-0xd8bf] has been reserved
system 00:08: [io 0xe000-0xe07f] has been reserved
system 00:08: [io 0xe080-0xe0ff] has been reserved
system 00:08: [io 0xe400-0xe47f] has been reserved
system 00:08: [io 0xe480-0xe4ff] has been reserved
system 00:08: [io 0xe800-0xe87f] has been reserved
system 00:08: [io 0xe880-0xe8ff] has been reserved
system 00:08: [io 0xec00-0xec7f] has been reserved
system 00:08: [io 0xec80-0xecff] has been reserved
system 00:08: [io 0xeeac] has been reserved
system 00:08: [io 0xeeb0-0xeebf] has been reserved
system 00:08: [io 0xeec0-0xeeff] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (disabled)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:1f.0: BAR 7: [io 0xd800-0xd87f] has bogus alignment
pci 0000:00:02.1: BAR 0: assigned [mem 0x10000000-0x17ffffff pref]
pci 0000:00:02.1: BAR 0: set to [mem 0x10000000-0x17ffffff pref] (PCI address [0x10000000-0x17ffffff])
pci 0000:00:02.1: BAR 1: assigned [mem 0x18000000-0x1807ffff]
pci 0000:00:02.1: BAR 1: set to [mem 0x18000000-0x1807ffff] (PCI address [0x18000000-0x1807ffff])
pci 0000:00:1d.7: BAR 0: assigned [mem 0x18080000-0x180803ff]
pci 0000:00:1d.7: BAR 0: set to [mem 0x18080000-0x180803ff] (PCI address [0x18080000-0x180803ff])
pci 0000:00:1f.1: BAR 5: assigned [mem 0x18080400-0x180807ff]
pci 0000:00:1f.1: BAR 5: set to [mem 0x18080400-0x180807ff] (PCI address [0x18080400-0x180807ff])
pci 0000:00:1f.5: BAR 2: assigned [mem 0x18080800-0x180809ff]
pci 0000:00:1f.5: BAR 2: set to [mem 0x18080800-0x180809ff] (PCI address [0x18080800-0x180809ff])
pci 0000:00:1f.5: BAR 0: assigned [io 0x1000-0x10ff]
pci 0000:00:1f.5: BAR 0: set to [io 0x1000-0x10ff] (PCI address [0x1000-0x10ff])
pci 0000:00:1f.5: BAR 3: assigned [mem 0x18080a00-0x18080aff]
pci 0000:00:1f.5: BAR 3: set to [mem 0x18080a00-0x18080aff] (PCI address [0x18080a00-0x18080aff])
pci 0000:00:1f.6: BAR 0: assigned [io 0x1400-0x14ff]
pci 0000:00:1f.6: BAR 0: set to [io 0x1400-0x14ff] (PCI address [0x1400-0x14ff])
pci 0000:00:1f.6: BAR 1: assigned [io 0x1800-0x187f]
pci 0000:00:1f.6: BAR 1: set to [io 0x1800-0x187f] (PCI address [0x1800-0x187f])
pci 0000:00:1f.5: BAR 1: assigned [io 0x1880-0x18bf]
pci 0000:00:1f.5: BAR 1: set to [io 0x1880-0x18bf] (PCI address [0x1880-0x18bf])
pci 0000:00:1d.0: BAR 4: assigned [io 0x18c0-0x18df]
pci 0000:00:1d.0: BAR 4: set to [io 0x18c0-0x18df] (PCI address [0x18c0-0x18df])
pci 0000:00:1d.1: BAR 4: assigned [io 0x18e0-0x18ff]
pci 0000:00:1d.1: BAR 4: set to [io 0x18e0-0x18ff] (PCI address [0x18e0-0x18ff])
pci 0000:00:1e.0: BAR 9: assigned [mem 0x1c000000-0x1fffffff pref]
pci 0000:01:0b.0: BAR 0: assigned [mem 0x20000000-0x20000fff]
pci 0000:01:0b.0: BAR 0: set to [mem 0x20000000-0x20000fff] (PCI address [0x20000000-0x20000fff])
pci 0000:01:0b.0: BAR 10: assigned [mem 0x24000000-0x27ffffff]
pci 0000:01:0b.0: BAR 9: assigned [mem 0x1c000000-0x1fffffff pref]
pci 0000:01:0b.0: BAR 8: assigned [io 0xc000-0xc0ff]
pci 0000:01:0b.0: BAR 7: assigned [io 0xc400-0xc4ff]
pci 0000:01:0b.0: CardBus bridge to [bus 02-02]
pci 0000:01:0b.0: bridge window [io 0xc400-0xc4ff]
pci 0000:01:0b.0: bridge window [io 0xc000-0xc0ff]
pci 0000:01:0b.0: bridge window [mem 0x1c000000-0x1fffffff pref]
pci 0000:01:0b.0: bridge window [mem 0x24000000-0x27ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 01-03]
pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xcfffffff]
pci 0000:00:1e.0: bridge window [mem 0x1c000000-0x1fffffff pref]
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:01:0b.0: enabling device (0000 -> 0003)
pci 0000:01:0b.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xcff00000-0xcfffffff]
pci_bus 0000:01: resource 2 [mem 0x1c000000-0x1fffffff pref]
pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:02: resource 0 [io 0xc400-0xc4ff]
pci_bus 0000:02: resource 1 [io 0xc000-0xc0ff]
pci_bus 0000:02: resource 2 [mem 0x1c000000-0x1fffffff pref]
pci_bus 0000:02: resource 3 [mem 0x24000000-0x27ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 128 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.7: enabling device (0000 -> 0002)
pci 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.7: PCI INT D disabled
pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
....
Freeing initrd memory: 56k freed
Simple Boot Flag at 0x7c set to 0x1
apm: BIOS not found.
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.17)
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
Btrfs loaded
msgmni has been set to 460
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Fan [FAN] (off)
Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (35 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial 0000:00:1f.6: power state changed by ACPI to D0
serial 0000:00:1f.6: power state changed by ACPI to D0
serial 0000:00:1f.6: enabling device (0000 -> 0001)
serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
serial 0000:00:1f.6: PCI INT B disabled
Non-volatile memory driver v1.3
intel_rng: FWH not detected
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
tlan: ThunderLAN driver v1.17
tlan: 0 devices installed, PCI: 0 EISA: 0
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0x18080000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018e0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
IPv4 over IPv4 tunneling driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 33
RxRPC: Registered security type 2 'rxkad'
Registering the dns_resolver key type
Using IPI No-Shortcut mode
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2016-12-30 10:19:04 UTC (1483093144)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ata2.01: NODEV after polling detection
ata2.00: ATAPI: UJDA750 DVD/CDRW, 1.51, max UDMA/33
ata1.00: ATA-5: HITACHI_DK23FA-40, 00M5A0D0, max UDMA/100
ata1.00: 78140160 sectors, multi 0: LBA
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23FA-4 00M5 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM MATSHITA UJDA750 DVD/CDRW 1.51 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 456k freed
squashfs: version 4.0 (2009/01/31) Phillip Lougher
aufs 3.2-20131104
busybox[883]: segfault at 0 ip 0805830d sp bf9b23e4 error 4 in busybox[8048000+43000]
busybox[884]: segfault at 0 ip 0805830d sp bf821494 error 4 in busybox[8048000+43000]
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input2
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input3
udevd[949]: starting version 182
Create /dev/ram0
Create /dev/ram1
Create /dev/ram10
Create /dev/ram11
Create /dev/ram12
Create /dev/ram13
Create /dev/ram14
Create /dev/ram15
Create /dev/ram2
Create /dev/ram3
Create /dev/ram4
Create /dev/ram5
Create /dev/ram6
Create /dev/ram7
Create /dev/ram8
Create /dev/ram9
Create /dev/sr0
Switching / to tmpfs...
Loading module: squashfs
Switching / to aufs...
Loading module: aufs
Done
Processing: /etc/init.d/rcS...
[0;33mMounting proc filesystem on /proc [0m[ Done
[0;33mMounting devtmpfs filesystem on: /dev [0m[ Done
Starting udev daemon...
Udevadm requesting events from the Kernel...
Udevadm waiting for the event queue to finish...
Remounting rootfs read/write...
Mounting filesystems in fstab...
[0;33mSearching for early boot options... [0m[ Done
[0;33mCleaning up the system... [0m[ Done
[0;33mMounting usbfs filesystem on: /proc/bus/usb [0m[ Done
[0;33mStarting system log daemon: syslogd... [0m[ Done
[0;33mStarting kernel log daemon: klogd... [0m[ Done
Detecting PCI devices Kernel modules...
* Builtin module : ata_piix
* Builtin module : ehci_hcd
* Builtin module : uhci_hcd
Detecting USB devices Kernel modules...
EHCI Host Controller [40G hub
UHCI Host Controller [40G hub
UHCI Host Controller [40G hub
Enable fan control...
[0;33mTriggering udev events: --action=add [0m[ Done
Processing: /etc/init.d/bootopts.sh
Checking for SliTaz cmdline options...
[0;33mConfiguring user and group: tux... [0m[ Done
[0;33mSetting system locale to: fr_FR.UTF-8 [0m[ Done
[0;33mSetting system keymap to: fr-latin1... [0m[ Done
Processing: /etc/init.d/system.sh
[0;33mSetting system locale: fr_FR.UTF-8 [0m[ Done
[0;33mLoading console keymap: fr-latin1 [0m[ Done
Swap memory detected on: /dev/sda2
[0;33mActivating swap memory... [0m[ Done
Starting TazPanel web server on port 82...[ Done
Found hardware: "ICH4" "Analog Devices AD1981B" "AC97a:41445374" "0x1179" "0x0241"
Hardware is initialized using a generic method
Processing: /etc/init.d/network.sh
Loading network settings from /etc/network.conf
[0;33mSetting hostname to: slitaz [0m[ Done
[0;33mConfiguring loopback... [0m[ Done
Starting udhcpc client on: eth0...
udhcpc (v1.23.2) started
Sending discover...
Sending select for 192.168.0.44...
Sending select for 192.168.0.44...
Lease of 192.168.0.44 obtained, lease time 43200
deleting routers
adding dns 192.168.0.254
Processing: /etc/init.d/local.sh
Starting X environment...
[0;33mStarting message bus daemon: DBUS... [0m[ Done
Starting all daemons...
Setting up kernel security rules... [ Done
WARNING: IPtables rules are disabled
[0;33mStarting inetd daemon: inetd... [0m[ Done
[0;33mStarting ntpd daemon: ntpd... [0m[ Done
Welcome to your box)
You must log in to post.
