Can't boot Slitaz on Dell Optiplex GX110;126MB RAM; 9GB HD

SliTaz Forum » English Support » Live and installation

Can't boot Slitaz on Dell Optiplex GX110;126MB RAM; 9GB HD

(8 posts) (6 voices)

Started 12 years ago by Anonymous
Latest reply from jeliotcranch
This topic is not a support question

Tags:

No tags yet.

Anonymous

offline
Unregistered

I'm a newbie on linux, a windows user perhaps, but can't keep windows on the system so i searched for a different os and found out this distro... base on the comments, this os is good so i downloaded it and burned it... now, i came to booting this on this computer and it boots but..... when the booting ends... first an arrow will appear and within a second, it will vanish and a black screen would appear... I tried waiting the black screen to load< for i don't think that it will not load> but nothing happened.. please help me with this problem...

ps: i'm sorry if i can't understand some terms.. i'm a newbie.. hehe...
-- i tried searching for solutions but can't relate with them...

Posted 12 years ago #
Saipul

offline
Member

try running with stable version http://mirror.slitaz.org/iso/3.0/slitaz-3.0.iso , if you running with cooking version maybe problems with the intel chipset.

Posted 12 years ago #
Trixar_za

offline
Key Master

Your system doesn't have enough RAM to run the default LiveCD (you need atleast 160MB), but you can use one of the loram versions which you can find @ http://mirror.slitaz.org/iso/cooking/flavors/ for cooking or http://mirror.slitaz.org/iso/stable/flavors/ for SliTaz 3.

There is also a guide on them: http://doc.slitaz.org/en:guides:lowramcd

Posted 12 years ago #
laika

offline
Member

Yeah, I tried 3.0 on an old HP laptop with 128mb RAM and 475mHz cpu. It was no go, so I went for the 3.0-base.iso, which is command line only. Maybe I will try a loram version. Thanks, Trixar.

Posted 12 years ago #
Bellard

offline
Key Master

http://mirror.slitaz.org/iso/3.0/flavors/slitaz-3.0-3in1.iso will detect the available RAM and will launch the according flavor (base, justx or core)...
But http://mirror.slitaz.org/iso/3.0/flavors/slitaz-3.0-loram.iso is the best choice with 128M.

Posted 12 years ago #
jeliotcranch

offline
Member

I have the same problem as the OP with Slitaz 3.0 stable on a Dell, 256MB ram, 700MHz celeron proc. It had Windows 98 previously installed and allegedly working, but was wiped with DBAN prior to me receiving it.
I've run MEMTEST for several hours on the ram, went through the complete test many times w/o fail.
I've been able to get a puppy linux version running for a short time, but it "blacks out" after 3-5 minutes. The puplet I was running has about a 170MB footprint.
I'll try the loram version and report back.

Posted 12 years ago #
jeliotcranch

offline
Member

Tried the loram iso suggested above, but same issue. The computer is the Dell Dimension L700cx. It does seem as though there is a hardware incompatibility. Perhaps b/c its a dell?

Posted 12 years ago #
jeliotcranch

offline
Member

finally solved the issue. It boiled down to a very old video driver for the integrated video on the dell board. While I love slitaz for super-smallness, I had to use Puppy linux, the Wary pup LTS, specially designed for OLD equipment. Its a nice desktop, looks good but far from extravagant.

Posted 12 years ago #

RSS feed for this topic

Reply

You must log in to post.