on last debian, hard drive detect :
root@debian:/home/debian# fdisk -l
Disque /dev/sda : 164.7 Go, 164696555520 octets
255 têtes, 63 secteurs/piste, 20023 cylindres, total 321672960 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x0000e7e0
Périphérique Amorce Début Fin Blocs Id Système
/dev/sda1 * 2048 320102399 160050176 83 Linux
/dev/sda2 320104446 321671167 783361 5 Étendue
/dev/sda5 320104448 321671167 783360 82 partition d'échange Linux / Solaris
root@debian:/home/debian# parted -l
bash: parted : commande introuvable
root@debian:/home/debian# blkid
/dev/sda5: UUID="91c3f88b-020c-46f6-ae32-5aaffd3086db" TYPE="swap"
/dev/sda1: UUID="43109256-51da-43fc-918c-03b0c740b87e" TYPE="ext4"
root@debian:/home/debian# lsmod
Module Size Used by
nls_utf8 12416 0
nls_cp437 12417 0
vfat 17116 0
fat 44497 1 vfat
ext3 134152 0
jbd 47281 1 ext3
nfsd 173890 2
nfs 265921 0
nfs_acl 12463 2 nfs,nfsd
auth_rpcgss 32143 2 nfs,nfsd
fscache 31978 1 nfs
lockd 57277 2 nfs,nfsd
sunrpc 143904 6 lockd,auth_rpcgss,nfs_acl,nfs,nfsd
loop 17810 0
snd_hda_codec_realtek 142274 1
snd_hda_intel 21786 0
snd_hda_codec 63477 2 snd_hda_intel,snd_hda_codec_realtek
snd_hwdep 12943 1 snd_hda_codec
snd_pcm 53461 2 snd_hda_codec,snd_hda_intel
radeon 640791 2
snd_page_alloc 12867 2 snd_pcm,snd_hda_intel
ttm 47786 1 radeon
snd_timer 22356 1 snd_pcm
snd 42722 6 snd_timer,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_realtek
soundcore 12921 1 snd
drm_kms_helper 22738 1 radeon
drm 146387 4 drm_kms_helper,ttm,radeon
i2c_ali15x3 12490 0
i2c_ali1535 12490 0
joydev 17010 0
parport_pc 22036 0
parport 31254 1 parport_pc
evdev 17225 9
serio_raw 12803 0
pcspkr 12515 0
power_supply 13283 1 radeon
i2c_algo_bit 12713 1 radeon
i2c_core 19116 6 i2c_algo_bit,i2c_ali1535,i2c_ali15x3,drm,drm_kms_helper,radeon
processor 27565 0
button 12817 0
shpchp 26717 0
thermal_sys 17752 1 processor
ext4 306996 1
crc16 12327 1 ext4
jbd2 52330 1 ext4
mbcache 12938 2 ext4,ext3
sg 21476 0
sd_mod 35425 3
crc_t10dif 12332 1 sd_mod
sr_mod 17468 0
usbhid 31554 0
cdrom 34813 1 sr_mod
hid 64284 1 usbhid
ata_generic 12439 0
usb_storage 35142 0
floppy 48087 0
ohci_hcd 22059 0
pata_ali 12880 0
sata_uli 12449 2
libata 125014 3 sata_uli,pata_ali,ata_generic
ehci_hcd 35509 0
scsi_mod 135037 5 libata,usb_storage,sr_mod,sd_mod,sg
usbcore 104555 5 ehci_hcd,ohci_hcd,usb_storage,usbhid
skge 35968 0
usb_common 12338 1 usbcore
root@debian:/home/debian# lspci -nnvv
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI Radeon Xpress 200 Host Bridge [1002:5a33] (rev 01)
Subsystem: Elitegroup Computer Systems Device [1019:1b36]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge [1002:5a3f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ff400000-ff4fffff
Prefetchable memory behind bridge: bff00000-dfefffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [b0] Subsystem: Elitegroup Computer Systems Device [1019:1b36]
00:19.0 PCI bridge [0604]: ULi Electronics Inc. M5249 HTT to PCI Bridge [10b9:5249] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR+ <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: ff500000-ff5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR+ <PERR+
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [c0] HyperTransport: MSI Mapping Enable+ Fixed+
00:1c.0 USB controller [0c03]: ULi Electronics Inc. USB 1.1 Controller [10b9:5237] (rev 03) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device [1019:1b36]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 64 (20000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at ff6ff000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:1c.1 USB controller [0c03]: ULi Electronics Inc. USB 1.1 Controller [10b9:5237] (rev 03) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device [1019:1b36]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 64 (20000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at ff6fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:1c.2 USB controller [0c03]: ULi Electronics Inc. USB 1.1 Controller [10b9:5237] (rev 03) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device [1019:1b36]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 64 (20000ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 19
Region 0: Memory at ff6fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:1c.3 USB controller [0c03]: ULi Electronics Inc. USB 2.0 Controller [10b9:5239] (rev 01) (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Device [1019:1b36]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 23
Region 0: Memory at ff6fcc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=0090
Kernel driver in use: ehci_hcd
00:1d.0 Audio device [0403]: ULi Electronics Inc. HD Audio Controller [10b9:5461]
Subsystem: Elitegroup Computer Systems Device [1019:1b36]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 20000ns max)
Interrupt: pin C routed to IRQ 22
Region 0: Memory at ff6f8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_hda_intel
00:1e.0 ISA bridge [0601]: ULi Electronics Inc. PCI to LPC Controller [10b9:1573] (rev 31)
Subsystem: Elitegroup Computer Systems Device [1019:1b36]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 6000ns max)
00:1e.1 Bridge [0680]: ULi Electronics Inc. M7101 Power Management Controller [PMU] [10b9:7101]
Subsystem: Elitegroup Computer Systems Device [1019:1b36]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1f.0 IDE interface [0101]: ULi Electronics Inc. M5229 IDE [10b9:5229] (rev c7) (prog-if 8a [Master SecP PriP])
Subsystem: Elitegroup Computer Systems Device [1019:1b36]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 21
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_ali
00:1f.1 RAID bus controller [0104]: ULi Electronics Inc. ULi 5287 SATA [10b9:5287] (rev 02)
Subsystem: Elitegroup Computer Systems Device [1019:5287]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128, Cache Line Size: 512 bytes
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at ec00 [size=16]
Region 1: I/O ports at e800 [size=8]
Region 2: I/O ports at e400 [size=16]
Region 3: I/O ports at e000 [size=8]
Region 4: I/O ports at dc00 [size=32]
Region 5: Memory at ff6fc800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sata_uli
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RC410 [Radeon Xpress 200] [1002:5a61] (prog-if 00 [VGA controller])
Subsystem: Elitegroup Computer Systems Device [1019:1b36]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at b800 [size=256]
Region 2: Memory at ff4f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at ff4c0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: radeon
02:15.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
Subsystem: Elitegroup Computer Systems Marvell 88E8001 Gigabit Ethernet Controller (ECS) [1019:8001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ff5fc000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at c800 [size=256]
Expansion ROM at ff5c0000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=7 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
Read-only fields:
[PN] Part number: Yukon 88E8001
[EC] Engineering changes: Rev. 1.3
[MN] Manufacture ID: 4d 61 72 76 65 6c 6c
[SN] Serial number: AbCdEfG334454
[CP] Extended capability: 01 10 cc 03
[RV] Reserved: checksum good, 10 byte(s) reserved
Read/write fields:
[RW] Read-write area: 121 byte(s) free
End
Kernel driver in use: skge