Edit /etc/X11/xorg.conf.d/70-Screen.conf
Add # in front of lines from SubSection=>EndSubSection with Depth 24
Be prepared to undo if the monitor blanks.
Pentium III runs way too slow? - meets requirements, sys-report
(20 posts) (6 voices)- Started 12 years ago by Jon_J
- Latest reply from Jon_J
- This topic is not a support question
-
mojo
offlineKey MasterPosted 12 years ago # -
Jon_J
offlineMemberThat didn't work.. I got it back to the desktop using nano. But Now I'm back loading VESA
When I was running SiS, every time it boots, it loads 1400x1050 resolution, and I have to set it back to 1024x768. It doesn't save the settings.
I think it's time to salvage the drives and send this box to the junkpile.
It's so slow, no one could ever get any work done on it, it may be good for old DOS games or something.Posted 12 years ago # -
marcb
offlineMemberi have this xorg.conf from my old asus laptop, should be useful for your configuration
==========================================================
Section "Monitor"
Identifier "monitor1"
VendorName "Generic"
ModelName "1024x768 @ 70 Hz"
HorizSync 31.5-57.0
VertRefresh 50-70# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSectionSection "Device"
Identifier "device1"
VendorName "Silicon Integrated System"
BoardName "SiS 650"
Driver "sis"
Option "DPMS"
EndSectionSection "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24Subsection "Display"
Depth 8
Virtual 1024 768
EndSubsectionSubsection "Display"
Depth 15
Virtual 1024 768
EndSubsectionSubsection "Display"
Depth 16
Virtual 1024 768
EndSubsectionSubsection "Display"
Depth 24
Virtual 1024 768
EndSubsection
EndSection=====================================================
Posted 12 years ago # -
jp32
offlineMemberDear jon_J
You habe been successful running slitaz with 1366x768 on a dell netbook with
gma 500-chip. Can You just tell me how You did? I have a Acer Spire-One 751 with GMA-500. The greatest pain is using (trying to use) the mousewheel for scrolling in
pdf- or txt-files. Thank You (or other) for help.
jp32Posted 10 years ago # -
Jon_J
offlineMemberREMOVED:
look here for same post:
http://forum.slitaz.org/topic/jp32-gma500-poulsbo-graphicsJon
Posted 10 years ago #
Reply
You must log in to post.
