SliTaz Forum

Question about 5.0

(33 posts) (7 voices)

• Started 9 years ago by frash23
• Latest reply from alanyih
• This topic is not a support question

Tags:

No tags yet.

1. 

   alanyih
   

   offline

   Administrator

   VGA - Intel i915 ( 1920x1080 )

   i915 310726 2
   video 11362 1 i915
   i2c_algo_bit 4368 1 i915
   drm_kms_helper 21202 1 i915
   drm 154213 2 i915,drm_kms_helper
   intel_agp 10400 1 i915
   i2c_core 15927 4 i915,i2c_algo_bit,drm_kms_helper,drm
   wmi 7235 0
   intel_gtt 11831 3 i915,intel_agp
   agpgart 22932 3 drm,intel_agp,intel_gtt
   button 4167 1 i915

   1.
   tux@slitaz:~$ modinfo i915
   filename: /lib/modules/3.2.53-slitaz64/kernel/drivers/gpu/drm/i915/i915.ko.xz
   license: GPL and additional rights
   description: Intel Graphics
   author: Tungsten Graphics, Inc.
   license: GPL and additional rights
   alias: pci:v00008086d0000016Asv*sd*bc03sc*i*
   [..]

   alias: pci:v00008086d00003577sv*sd*bc03sc*i*
   depends: drm,drm_kms_helper,intel-gtt,i2c-core,video,button,i2c-algo-bit,intel-agp
   intree: Y
   vermagic: 3.2.53-slitaz64 SMP mod_unload
   parm: invert_brightness:Invert backlight brightness (-1 force normal, 0 machine defaults, 1 force inversion), please report PCI device ID, subsystem vendor and subsystem device ID to dri-devel@lists.freedesktop.org, if your machine needs it. It will then be included in an upcoming module version. (int)
   parm: modeset:Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, 1=on, -1=force vga console preference [default]) (int)
   parm: fbpercrtc:int
   parm: panel_ignore_lid:Override lid status (0=autodetect [default], 1=lid open, -1=lid closed) (int)
   parm: powersave:Enable powersavings, fbc, downclocking, etc. (default: true) (int)
   parm: semaphores:Use semaphores for inter-ring sync (default: -1 (use per-chip defaults)) (int)
   parm: i915_enable_rc6:Enable power-saving render C-state 6 (default: -1 (use per-chip default) (int)
   parm: i915_enable_fbc:Enable frame buffer compression for power savings (default: -1 (use per-chip default)) (int)
   parm: lvds_downclock:Use panel (LVDS/eDP) downclocking for power savings (default: false) (int)
   parm: lvds_use_ssc:Use Spread Spectrum Clock with panels [LVDS/eDP] (default: auto from VBT) (int)
   parm: vbt_sdvo_panel_type:Override selection of SDVO panel mode in the VBT (default: auto) (int)
   parm: reset:Attempt GPU resets (default: true) (bool)
   parm: enable_hangcheck:Periodically check GPU activity for detecting hangs. WARNING: Disabling this can cause system wide hangs. (default: true) (bool)

   2.
   tux@slitaz:~$ sudo lspci -v | grep -A 10 VGA
   00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
   Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 4001
   Flags: bus master, fast devsel, latency 0, IRQ 16
   Memory at fe400000 (64-bit, non-prefetchable) [size=4M]
   Memory at d0000000 (64-bit, prefetchable) [size=256M]
   I/O ports at dc00 [size=8]
   Expansion ROM at <unassigned> [disabled]
   Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
   Capabilities: [d0] Power Management version 2
   Capabilities: [a4] PCI Advanced Features
   Kernel driver in use: i915

   3.
   tux@slitaz:~$ dmesg | grep -e i915 -e drm
   [drm] Initialized drm 1.1.0 20060810
   i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
   i915 0000:00:02.0: setting latency timer to 64
   [drm] MTRR allocation failed. Graphics performance may suffer.
   [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
   [drm] Driver supports precise vblank timestamp query.
   fbcon: inteldrmfb (fb0) is primary device
   fb0: inteldrmfb frame buffer device
   drm: registered panic notifier
   [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

   4.
   tux@slitaz:~$ grep -A 10 slitaz64 /var/log/Xorg.0.log
   [ 6.243] Current Operating System: Linux slitaz 3.2.53-slitaz64 #2 SMP Thu Oct 23 19:13:12 Europe 2014 x86_64
   [ 6.243] Kernel command line: root=/dev/sda6 autologin
   [ 6.243] Build Date: 22 March 2013 08:40:16AM
   [ 6.243]
   [ 6.243] Current version of pixman: 0.28.2
   [ 6.243] Before reporting problems, check http://www.slitaz.org/
   to make sure that you have the latest version.
   [ 6.243] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
   [ 6.243] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 25 08:36:56 2014

   5.
   tux@slitaz:~$ grep -A 5 FBDEV\(1 /var/log/Xorg.0.log
   [ 6.324] (**) FBDEV(1): claimed PCI slot 0@0:2:0
   [ 6.324] (II) FBDEV(1): using default device
   [ 6.324] (==) FBDEV(1): Depth 24, (==) framebuffer bpp 32
   [ 6.324] (==) FBDEV(1): RGB weight 888
   [ 6.324] (==) FBDEV(1): Default visual is TrueColor
   [ 6.324] (==) FBDEV(1): Using gamma correction (1.0, 1.0, 1.0)
   [ 6.324] (II) FBDEV(1): hardware: inteldrmfb (video memory: 8100kB)
   [ 6.324] (II) FBDEV(1): checking modes against framebuffer device...
   [ 6.324] (II) FBDEV(1): checking modes against monitor...
   [ 6.324] (--) FBDEV(1): Virtual size is 1920x1080 (pitch 1920)
   [ 6.324] (**) FBDEV(1): Built-in mode "current"
   [ 6.324] (==) FBDEV(1): DPI set to (96, 96)
   [ 6.324] (II) Loading sub module "fb"
   [ 6.324] (II) LoadModule: "fb"
   [ 6.324] (II) Loading /usr/lib/X11/modules/libfb.so
   [ 6.329] (II) Module fb: vendor="X.Org Foundation"
   [ 6.329] compiled for 1.12.1, module version = 1.0.0
   --
   [ 6.329] (**) FBDEV(1): using shadow framebuffer
   [ 6.329] (II) Loading sub module "shadow"
   [ 6.329] (II) LoadModule: "shadow"
   [ 6.329] (II) Loading /usr/lib/X11/modules/libshadow.so
   [ 6.330] (II) Module shadow: vendor="X.Org Foundation"
   [ 6.330] compiled for 1.12.1, module version = 1.1.0

   Posted 9 years ago #
2. 

   alanyih
   

   offline

   Administrator

   Audio - Intel HDA

   snd_hda_codec_idt 47244 1
   snd_hda_intel 20389 4
   snd_hda_codec 56353 2 snd_hda_codec_idt,snd_hda_intel
   snd_hwdep 5117 1 snd_hda_codec
   snd_pcm 57218 3 snd_hda_intel,snd_hda_codec
   snd_page_alloc 5929 2 snd_hda_intel,snd_pcm
   snd_timer 15484 2 snd_pcm
   snd 47500 12 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
   soundcore 4449 1 snd

   1.
   tux@slitaz:~$ modinfo snd_hda_intel
   filename: /lib/modules/3.2.53-slitaz64/kernel/sound/pci/hda/snd-hda-intel.ko.xz
   description: Intel HDA driver
   license: GPL
   alias: pci:v00001022d*sv*sd*bc04sc03i00*
   [..]

   alias: pci:v00008086d00001C20sv*sd*bc*sc*i*
   depends: snd-hda-codec,snd-pcm,snd,snd-page-alloc
   intree: Y
   vermagic: 3.2.53-slitaz64 SMP mod_unload
   parm: index:Index value for Intel HD audio interface. (array of int)
   parm: id:ID string for Intel HD audio interface. (array of charp)
   parm: enable:Enable Intel HD audio interface. (array of bool)
   parm: model:Use the given board model. (array of charp)
   parm: position_fix:DMA pointer read method.(0 = auto, 1 = LPIB, 2 = POSBUF, 3 = VIACOMBO). (array of int)
   parm: bdl_pos_adj:BDL position adjustment offset. (array of int)
   parm: probe_mask:Bitmask to probe codecs (default = -1). (array of int)
   parm: probe_only:Only probing and no codec initialization. (array of int)
   parm: single_cmd:Use single command to communicate with codecs (for debugging only). (bool)
   parm: enable_msi:Enable Message Signaled Interrupt (MSI) (int)
   parm: power_save:Automatic power-saving timeout (in second, 0 = disable). (int)
   parm: power_save_controller:Reset controller in power save mode. (bool)
   parm: align_buffer_size:Force buffer and period sizes to be multiple of 128 bytes. (bool)
   parm: snoop:Enable/disable snooping (bool)

   2.
   tux@slitaz:~$ sudo lspci -v | grep -A 10 Audio
   00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
   Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 4001
   Flags: bus master, fast devsel, latency 0, IRQ 16
   Memory at feaf8000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: [50] Power Management version 2
   Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
   Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
   Capabilities: [100] Virtual Channel
   Capabilities: [130] Root Complex Link
   Kernel driver in use: snd_hda_intel

   3.
   tux@slitaz:~$ dmesg | grep snd
   snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
   snd_hda_intel 0000:00:1b.0: setting latency timer to 64

   Attachments

   1. 20141025-alsamixer-core64.png (48.1 KB, 1,115 downloads) 9 years old

   Posted 9 years ago #
3. 

   alanyih
   

   offline

   Administrator

   CDROM

   1.
   tux@slitaz:~$ dmesg | grep -e hda -e 9660
   hda: PIONEER DVD-RW DVR-K06RS, ATAPI CD/DVD-ROM drive
   hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
   hda: UDMA/33 mode selected
   ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2000kB Cache
   snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
   snd_hda_intel 0000:00:1b.0: setting latency timer to 64
   ISO 9660 Extensions: Microsoft Joliet Level 3
   ISO 9660 Extensions: IEEE_P1282

   2.
   tux@slitaz:~$ mount | grep cdrom
   /dev/hda on /media/cdrom type iso9660 (ro,nosuid,nodev,noexec,relatime)

   3.
   tux@slitaz:~$ cat /media/cdrom/install.sh
   #!/bin/sh
   #

   DIR=$(cd $(dirname $0); pwd)

   [ -d /var/cache/tazpkg ] || mkdir -p /var/cache/tazpkg
   ls -d $DIR/packages/* > /var/lib/tazpkg/mirror
   ln -fs $DIR/packages/*/*.tazpkg /var/cache/tazpkg/
   ln -fs $DIR/packages/*/packages.* /var/lib/tazpkg
   ln -fs $DIR/packages/*/files.list.lzma /var/lib/tazpkg
   [ -d /var/www ] || mkdir -p /var/www
   ln -s $DIR/website /var/www

   Posted 9 years ago #

RSS feed for this topic

Reply

You must log in to post.