Hi,
I have a Dell XPS 600 (Pentium D 3 Ghz, Nvidia GeForce 6800) with 4 GB of RAM installed. I have one other OS installed, Kubuntu 32 bit, which can use all of my RAM, but when using SliTaz, the Task Manager only sees 2 GB total. The following is my RAM configuration (bank 1 is PC6400U memory, the rest is PC5300U):
----------------
(I run sudo lshw -c memory in Kubuntu or SliTaz)
*-memory
description: System Memory
physical id: 1000
slot: System board or motherboard
size: 4GiB
*-bank:0
description: DIMM DDR Synchronous 533 MHz (1.9 ns)
product: NT1GT64U8HA0BY-37B
vendor: Nanya Technology
physical id: 0
serial: 59AA1E84
slot: DIMM_1
size: 1GiB
width: 64 bits
clock: 533MHz (1.9ns)
*-bank:1
description: DIMM DDR Synchronous 533 MHz (1.9 ns)
product: EBE10UE8ACWA-8G-E
vendor: 7F7FFE0000000000
physical id: 1
serial: CCEF1CA6
slot: DIMM_3
size: 1GiB
width: 64 bits
clock: 533MHz (1.9ns)
*-bank:2
description: DIMM DDR Synchronous 533 MHz (1.9 ns)
product: NT1GT64U8HA0BY-37B
vendor: Nanya Technology
physical id: 2
serial: 10AC1E85
slot: DIMM_2
size: 1GiB
width: 64 bits
clock: 533MHz (1.9ns)
*-bank:3
description: DIMM DDR Synchronous 533 MHz (1.9 ns)
product: HYMP512U64CP8-Y5
vendor: Hynix Semiconductor (Hyundai Electronics)
physical id: 3
serial: 00003267
slot: DIMM_4
size: 1GiB
width: 64 bits
clock: 533MHz (1.9ns)----------------
Is it a kernel issue? If so, should I go compile another kernel?
Many thanks,
- searchfgold
