SliTaz won't boot (after failed attempt to ungrade system)

SliTaz Forum » English Support » Live and installation

SliTaz won't boot (after failed attempt to ungrade system)

(7 posts) (3 voices)

Started 9 years ago by masterforest
Latest reply from Aleksej
This topic is not a support question

Tags:

No tags yet.

masterforest

offline
Member

Hi everyone, SliTaz won't boot. Also, putting a usb stick to switch to lubuntu, the computer recognize the usb device but when you select to boot from there it will do as you selected to boot from disk. It used to make two beep at boot, now it stillmakes two beep but the time between them is longer. This is the message that comes out, also a longer version where the final part is this one anyways. Machine is an Acer Veriton 281

Booting SliTAz GNU/Linux (cooking) (Kernel VMLinuz-2.6.37-SliTaz)
Filesystem type is ext2fs. partition type 0x83
[Linux-bzInage. setup=0x3400. size=0x25d440)
Kernel panic not - not syncing: no init found. Try passing init= option to kernel
see Linux Documentation/init.txt for guidance
Fid: 1. conn: swapper Not tainted 2.6.37-slitaz #2
Call Trace:
[<c1378122>] ? printk+0xf/0x11
[<c1378018>] panic+0x50/0x14b
[<c100119a>] init_post+0x99/0x9e
[<c15078b2>] kernel_init+0x184/0x18e
[<c150772e>] ? kernel_init+0x0/0x18e
[<c1003a76>] kernel_thread_helper+0x6/0x10

Posted 9 years ago #
masterforest

offline
Member

I read swapper not tained
Does this mean I have a chance to save the pc ?

Posted 9 years ago #
masterforest

offline
Member

So this message above is when I try to turn on the computer on the normal option, when selecting the cooking option it goes with a longer mesage that anyway ends like the one above. And now is making just one beep.

Posted 9 years ago #
masterforest

offline
Member

keyboard is unresponsive, every key I push seem not to work (keyborad works fine, tested)

Posted 9 years ago #
masterforest

offline
Member

Really? No one? Thanks for nothing, a great forum, a real community. Keep up w/ the great job on your fabolous efficient flawless OS

Posted 9 years ago #
kultex

offline
Key Master

Hi,

the Laptop should not have any problems to boot linux - there is only a problem with WiFi

http://ubuntuforums.org/showthread.php?t=1997744 - so Lubuntu should boot without any problems

all I can say is, try to boot from internal harddisk

http://doc.slitaz.org/en:guides:frugal

and use RC3 and not stable

Posted 9 years ago #
Aleksej

offline
Coder-hobbyist

Hi masterforest ,

Do you want to hear the answer "I don't know" here?
O.k. I don't know.

What does two beeps means? Or two sparse beeps? Quick search tells me that it may depend on your motherboard BIOS. I don't know it. Really, I hear silence from my netbook at boot time.
Please, search the internet, maybe that beeps means something...

Next. You wrote about failed attempt to upgrade SliTaz and about USB stick. I think you installed SliTaz into that stick, correct me if I wrong. Next, I can guess how you installed SliTaz on stick, but I could be wrong.

I see so called "Kernel panic". Seems you used something like "tazusb writefs" to save your current system into single archive. It is known issue. And I don't know the solution. And seems, two other SliTaz active developers also don't know that. It is o.k. for small "archives" like SliTaz Live USB is; but it is k.o. almost every time for big (or maybe just bigger) "archives" with SliTaz inside packed with many packages. There's no solution, it is a dead end.

That's all. Oh, yes when system get the "Kernel panic" system just freezes, it not listen to keyboard, you can only to switch it off.

I can only suggest you to install SliTaz into your computer's hard disk if you plan to work with it frequently, from day to day. Or make new Live USB, but not upgrade it.

Posted 9 years ago #

RSS feed for this topic

Reply

You must log in to post.