SliTaz Forum

Unable to compile the kernel with rolling

(7 posts) (4 voices)

• Started 10 years ago by Ceel
• Latest reply from l.manu
• This topic is not a support question

Tags:

No tags yet.

1. 

   Ceel
   

   offline

   Administrator

   Always the same error when compiling with the last rolling (20140420).
   
make[2]: *** [drivers/block/loop.o] Error 1
make[1]: *** [drivers/block] Error 2
make: *** [drivers] Error 2

   Assuming that the kernel sources couldn't be bugged, I've replaced after patching the /drivers/block/loop.c file with the original and it has worked!

   ... untill

     OBJCOPY arch/x86/boot/compressed/vmlinux.bin
     LZMA    arch/x86/boot/compressed/vmlinux.bin.lzma
   /bin/sh: xz: not found
     HOSTCC  arch/x86/boot/compressed/mkpiggy
     MKPIGGY arch/x86/boot/compressed/piggy.S
   arch/x86/boot/compressed/vmlinux.bin.lzma: No such file or directory
     AS      arch/x86/boot/compressed/piggy.o
   gcc: error: arch/x86/boot/compressed/piggy.S: No such file or directory
   gcc: fatal error: no input files
   compilation terminated.
   make[2]: *** [arch/x86/boot/compressed/piggy.o] Error 1
   make[1]: *** [arch/x86/boot/compressed/vmlinux] Error 2
   make: *** [bzImage] Error 2

   No vmlinux.bin.lzma or piggy.S or piggy.o in /arch/x86/boot/compressed

   Posted 10 years ago #
2. 

   necrophcodr
   

   offline

   Member

   If you read the error messages, you'll notice that it cannot compress the vmlinuz image because it is missing the xz compressor. Install that.

   Posted 10 years ago #
3. 

   Ceel
   

   offline

   Administrator

   Yes you're right necrophcodr,

   but xz is a dependence of liunux-source and is installed when installing linux-source.
   I installed xz-dev to see if it would be ok with it but to night, when running get-linux-source:
   

   
   root@slitaz:/home/tux# get-linux-source
   Connecting to http://ftp.kernel.org (149.20.4.69:21)
   wget: ftp error: Failure writing network stream.
   Connecting to linux-kernel.uio.no (128.39.3.170:80)
   Connecting to linux-kernel.uio.no (128.39.3.170:80)
   Connecting to linux-kernel.uio.no (128.39.3.170:80)
   linux-3.2.53.tar.xz  100% |*******************************| 64063k  0:00:00 ETA
   patching file scripts/package/Makefile
   Hunk #2 FAILED at 152.
   1 out of 2 hunks FAILED -- saving rejects to file scripts/package/Makefile.rej
   Apply linux-diff.u
   patching file arch/x86/vdso/Makefile
   patching file scripts/Makefile.lib
   Apply linux-header.u
   patching file arch/x86/boot/header.S
   Apply linux-freeinitrd.u
   patching file arch/x86/mm/init.c
   patching file init/initramfs.c
   Apply linux-subroot.u
   patching file Documentation/kernel-parameters.txt
   patching file init/do_mounts.c
   Apply linux-CVE-2013-2929.u
   patching file arch/ia64/include/asm/processor.h
   patching file include/linux/binfmts.h
   patching file include/linux/sched.h
   patching file kernel/ptrace.c
   Apply aufs3-base.patch
   patching file fs/namei.c
   Hunk #1 succeeded at 1755 (offset 2 lines).
   patching file fs/splice.c
   Hunk #1 succeeded at 1094 (offset 9 lines).
   Hunk #2 succeeded at 1122 (offset 9 lines).
   patching file include/linux/namei.h
   patching file include/linux/splice.h
   Apply aufs3-standalone.patch
   patching file fs/file_table.c
   patching file fs/inode.c
   patching file fs/namei.c
   Hunk #1 succeeded at 1759 (offset 2 lines).
   patching file fs/namespace.c
   Hunk #1 succeeded at 1507 (offset 1 line).
   patching file fs/notify/group.c
   patching file fs/notify/mark.c
   Hunk #2 succeeded at 192 (offset 2 lines).
   Hunk #3 succeeded at 280 (offset 2 lines).
   Hunk #4 succeeded at 336 (offset 2 lines).
   patching file fs/open.c
   patching file fs/splice.c
   Hunk #1 succeeded at 1118 (offset 9 lines).
   Hunk #2 succeeded at 1145 (offset 9 lines).
   patching file security/commoncap.c
   Hunk #1 succeeded at 981 (offset 6 lines).
   patching file security/device_cgroup.c
   patching file security/security.c
   Apply aufs3-loopback.patch
   patching file drivers/block/loop.c
   Hunk #13 succeeded at 948 (offset 5 lines).
   Hunk #14 succeeded at 958 (offset 5 lines).
   Hunk #15 succeeded at 1006 (offset 5 lines).
   Hunk #16 succeeded at 1027 (offset 5 lines).
   Hunk #17 succeeded at 1070 (offset 7 lines).
   can't find file to patch at input line 189
   Perhaps you used the wrong -p or --strip option?
   The text leading up to this was:
   --------------------------
   |diff --git a/fs/aufs/f_op.c b/fs/aufs/f_op.c
   |index d6318f08b..56555de 100644
   |--- a/fs/aufs/f_op.c
   |+++ b/fs/aufs/f_op.c
   --------------------------
   File to patch: 

   and the system hangs here

   EDIT: get-linux-source properties --> Last modification: 04/28/14 10:01
   Were there some changes in the get-linux-source script?

   Posted 10 years ago #
4. 

   Ceel
   

   offline

   Administrator

   Hello,

   Back home and wanted to compile the kernel.

   root@slitaz:/usr/src/linux-3.2.53 # make bzImage
   make[1]: Nothing to be done for `relocs'.
     CHK     include/linux/version.h
     CHK     include/generated/utsrelease.h
     CALL    scripts/checksyscalls.sh
     CHK     include/generated/compile.h
     /usr/src/linux-3.2.53/scripts/gen_initramfs_list.sh: Cannot open 'initrd.cpio'
   make[1]: *** [usr/initramfs_data.cpio.lzma] Error 1
   make: *** [usr] Error 2
   root@slitaz:/usr/src/linux-3.2.53 #

   Well, the good thing is I don't have to wait 10 minutes now before having an error...

   What happens with compilation?

   Posted 9 years ago #
5. 

   Bellard
   

   offline

   Key Master

   Try:
   # tazpkg get-install busybox-boot
   # make bzImage

   Posted 9 years ago #
6. 

   Ceel
   

   offline

   Administrator

   Hi Bellard

   Thanks for your help. busybox-boot is installed when installing linux-source.
   I tried tazpkg -gi busybox-boot --forced but problem's still the same.

   I've noticed a problem during tazpkg up -i (from 5.0-rc1) but I don't think it's related to the error I meet:
   .../
   

   
   Connecting to mirror.slitaz.org (46.105.127.17:80)
   dbus-1.6.4.tazpkg    100% |********************************|   178k  0:00:00 ETA
   
   Installation of: dbus
   ================================================================================
   Copying dbus...                                                      [ Done ]
   Extracting dbus...                                                   [ Done ]
   Installing dbus...cp: target '/var/run' is not a directory
                                                                        [ Failed ]
   Removing all tmp files...                                            [ Done ]
   ================================================================================
   dbus (1.6.4) is installed.
   /...

   Yet, /var/run exists.

   Then, if I tazpkg -gi dbus --forced:
dbus-1.6.4 already in the cache: /var/cache/tazpkg/cooking/packages

   Installation of: dbus
   ================================================================================
   Copying dbus...                                                      [ Done ]
   Extracting dbus...                                                   [ Done ]
   Installing dbus...                                                   [ Done ]
   Removing all tmp files...                                            [ Done ]
   ================================================================================
   dbus (1.6.4) is installed.

   root@slitaz:/usr/src/linux-3.2.53 #

   When I tazpkg -gi linux-source after an update, then
   .../
   

   
   Installation of: glibc
   ================================================================================
   Copying glibc...                                                     [ Done ]
   Extracting glibc...                                                  [ Done ]
   Installing glibc...                                                  [ Failed ]
   Removing all tmp files...                                            [ Done ]
   ================================================================================
   glibc (2.14.1) is installed.
   /...
   

   If I try tazpkg -gi glibc --forced:
   glibc-2.14.1 already in the cache: /var/cache/tazpkg/cooking/packages

   Installation of: glibc
   ================================================================================
   Copying glibc...                                                     [ Done ]
   Extracting glibc...                                                  [ Done ]
   Installing glibc...                                                  [ Failed ]
   Removing all tmp files...                                            [ Done ]
   ================================================================================
   glibc (2.14.1) is installed.
   

   root@slitaz:/usr/src/linux-3.2.53 #

   Note there isn't any problem with glibc when I tazpkg -gi linux-source before tazpkg up -i

   Posted 9 years ago #
7. 

   l.manu
   

   offline

   Member

   1) The error /usr/src/linux-3.2.53/scripts/gen_initramfs_list.sh: Cannot open 'initrd.cpio' is happened because CONFIG_INITRAMFS_SOURCE is not empty.
   CONFIG_INITRAMFS_SOURCE is set to initrd.cpio. But initrd.cpio is not present into the directory.

   Try : copy the initrd from /usr/share/boot/initrd (busybox-boot).

   2) The system hangs here :
   --------------------------
   

   |diff --git a/fs/aufs/f_op.c b/fs/aufs/f_op.c
   |index d6318f08b..56555de 100644
   |--- a/fs/aufs/f_op.c
   |+++ b/fs/aufs/f_op.c
   --------------------------
   File to patch:

   because the aufs source is not present into /usr/src/kernel_patches/<aufs source directory>. If you do not need have this feature (AUFS filesystem), you can skip it.

   Posted 9 years ago #

RSS feed for this topic

Reply

You must log in to post.