SliTaz Forum

MJ-12

Member

Registered: 2014-04-03

Posts: 4

SliTaz RPi no boot Pi

Ext4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities

Ext4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities

Kernel panic - not syncing: No init found

linea

Administrator

Registered: 2011-03-31

Posts: 70

Re: SliTaz RPi no boot Pi

Hi, I'm getting the same errors as well.

My sdhc card shows up as:

/dev/mmcblk0p1 - fat32 - BOOT - 40MB

/dev/mmcblk0p2 - linux-swap - swap - 450MB

/dev/mmc/blk0p3 - ext4 - rootfs - 6GB

I'm using the slitaz-rpi-base-20140329 install.sh:

SliTaz Raspberry Pi Installation

================================================================================

Before processing please read the SliTaz ARM/RPi installation howto on:

  http://arm.slitaz.org/rpi

SD card disk name (ex sdc): mmcblk0

Mounting: /dev/mmcblk0 partitions... OK

Cleaning: filesystem directories... OK

Installing: boot files...cp: failed to preserve ownership for ‘/media/rpi/boot/bootcode.bin’: Operation not permitted

cp: failed to preserve ownership for ‘/media/rpi/boot/cmdline.txt’: Operation not permitted

cp: failed to preserve ownership for ‘/media/rpi/boot/config.txt’: Operation not permitted

cp: failed to preserve ownership for ‘/media/rpi/boot/fixup.dat’: Operation not permitted

cp: failed to preserve ownership for ‘/media/rpi/boot/kernel.img’: Operation not permitted

cp: failed to preserve ownership for ‘/media/rpi/boot/start.elf’: Operation not permitted

ERROR

Installing: rootfs files... OK

Unmounting: RPi sdcard... OK

================================================================================

Insert the SD card into your Raspberry Pi and boot!

mops

Member

Registered: 2011-06-04

Posts: 45

Re: SliTaz RPi no boot Pi

Hi Paul,

Look on your SD card to the / dev / input which is probably empty ?

so long Joerg