You are not logged in.
Pages: 1
Well, now I seem to have another issue. I have no audio at all. Output of lspci:
Offline
Try
lsmod | grep snd
are modules loaded?
I believe so.
[c]snd_usb_audio 58602 0
snd_hwdep 3808 1 snd_usb_audio
snd_usbmidi_lib 12433 1 snd_usb_audio
snd_rawmidi 12384 1 snd_usbmidi_lib
snd_seq_device 3757 1 snd_rawmidi
snd_intel8x0 19786 1
snd_ac97_codec 77963 1 snd_intel8x0
ac97_bus 718 1 snd_ac97_codec
snd_pcm 43737 3 snd_usb_audio,snd_intel8x0,snd_ac97_codec
snd_timer 12515 1 snd_pcm
snd 33394 11 snd_usb_audio,snd_hwdep,snd_usbmidi_lib,snd_rawmidi,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 3357 1 snd
snd_page_alloc 4853 2 snd_intel8x0,snd_pcm
[/c]
Offline
Try running alsamixer in a terminal, if you have dual soundcards, F6 will show them, check all columns available, you may just have to raise the volume.
Well here is something. I get audio only on the headphones but not the speakers, which tells me it might very well be the speakers.
Offline
Xoanan,
I have separated columns for speakers and for headphones in the alsa mixer. What in your case?
Offline
Hi,
setmixer was replaced in system.sh by alsa init but I think we need both for first boot.
I'm going to build a test iso with system.sh [c]alsa init && setmixer[/c]
Every computer I've booted with 5.0-rc2 live cd the PCM is muted and the sound levels are too low.
Sorry, I didn't realize this thread was about 4.0
Offline
Pages: 1
[ Generated in 0.017 seconds, 7 queries executed - Memory usage: 1.54 MiB (Peak: 1.77 MiB) ]