SliTaz Forum
You are not logged in.
Pages: 1
ENGLISH ON THE BOTTOM
Bonjour,
Tout d'abord, je trouve cette distribution très bien. J'étais passé de Slitaz 4.0 à Puppy linux mais je viens de réinstaller Slitaz 5.0 RC2 qui convient parfaitement à mon PC des années 2000 ! Elle est rapide et simple à utiliser avec des logiciels à jours.
Je sollicite votre aide car j'essaie d'utiliser ma carte Tuner DVB-T mais sans succès.
La carte semble bien installée les fichiers dev sont bien présent :
tux@slitaz:/$ ls /dev/dvb/adapter0/
demux0 dvr0 frontend0 net0
Les modules concernant mon tuner sont présents : Cx88_dvb Cx8800 Cx8802 Cx88xx losque je tape la commande lsmod.
J'essaie de lire le périphérique via VLC 2.1.5 mais il m'affiche le message :
En ligne de commande (en rouge) : "no suitable demux module for `dvb-t/ts://frequency=682000000:inversion=0:bandwidth=8:code-rate-hp=:code-rate-lp=:modulation=QAM:transmission=-1:guard=:hierarchy=-1'"
Dans l'interface graphique : "VLC can't recognize the input's format:
The format of 'dvb-t://frequency=538000000:inversion=0:bandwidth=8:code-rate-hp=:code-rate-lp=:modulation=QAM:transmission=-1:guard=:hierarchy=-1' cannot be detected. Have a look at the log for details."
Ceresse parce qu'un module de VLC n'a pas été activé lors de la compilation (le module dvb ?) ?
Ou est ce un problème d'installation de ma part ?
N'étant pas expert, j'ai essayé de télécharger les sources du dernier VLC mais j'ai vite laisser tomber ne sachant pas quelle module activer ! Lorsque je compile il n'y a pas d'interface graphique.
Je souhaiterai avoir une solution sans recompiler VLC si possible !
Quelqu'un pourrait il m'aider ?
Merci
Hello,
Foremost, I find this Distribution very good. I had changed Slitaz 4.0 by Puppy linux but I coming to reinstall Slitaz 5.0 RC2 that is suitable for my computer of 2000's. Speed, Simplicity and up-to-date softwares.
I request your help because I'm trying to use my DVB-T Tuner but without success.
The board seems to be installed, the dev files are presents :
tux@slitaz:/$ ls /dev/dvb/adapter0/
demux0 dvr0 frontend0 net0
The Modules which regarding my tuner are presents : Cx88_dvb Cx8800 Cx8802 Cx88xx when I type the lsmod command.
I try to read the the device with VLC 2.1.5 but it display next message :
In command line (in red) : "no suitable demux module for `dvb-t/ts://frequency=682000000:inversion=0:bandwidth=8:code-rate-hp=:code-rate-lp=:modulation=QAM:transmission=-1:guard=:hierarchy=-1'"
In graphical fixture : "VLC can't recognize the input's format:
The format of 'dvb-t://frequency=538000000:inversion=0:bandwidth=8:code-rate-hp=:code-rate-lp=:modulation=QAM:transmission=-1:guard=:hierarchy=-1' cannot be detected. Have a look at the log for details."
Is it because a VLC module was not activated during compilation (dvb maybe ?) ?
Or is it a problem of installation from myself ?
Is anybody can help me please ? SORRY FOR MY BAD ENGLISH !
Thanks.
Offline
Install w_scan frequency scanning utility.
More info:
https://www.google.com/search?q=w_scan
https://wiki.archlinux.org/index.php/DVB-T
Online
Thanks for your answer but I already have my channels.conf and it works on puppy linux (I have dual boot) with VLC.
Offline
If I try to launch command "vlc dvb://frequency=538000000" as it explain on https://wiki.archlinux.org/index.php/DVB-T, terminal displays this :
tux@slitaz:~ $ vlc dvb://frequency=538000000
VLC media player 2.1.5 Rincewind (revision 2.1.4-49-gdab6cb5)
[0xb5b00cc8] main interface error: no suitable interface module
[0x804b0d0] main libvlc error: interface "globalhotkeys,none" initialization failed
[0x804b0d0] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
[0x8246ce8] dtv access: please recompile vlc 2.1.5
[0x8249aa8] main input error: no suitable demux module for `dvb/ts://frequency=538000000'
Offline
Pages: 1
[ Generated in 0.021 seconds, 7 queries executed - Memory usage: 1.54 MiB (Peak: 1.77 MiB) ]