SliTaz Forum
You are not logged in.
hello
hank for the reply
https://paste.fedoraproject.org/paste/KW0E0c8qzQPRuPsn0GJm0A/raw
https://paste.fedoraproject.org/paste/XL6EpGZaAlrW6apIugWtCQ/raw
for next :
WITHOUT screen=text because when i put it, then i cannot launch xorg, it freeze on black screen..
https://paste.fedoraproject.org/paste/FdvR82VyyW1YbxE8BgmX1w
for next bis :
here, with the slitaz next live usb : replace home=.. by screen=text;
firstly falling on shell, logging on root, enabling connection then tazx, selecting intel;
this is the xorg.log at this time :
https://paste.fedoraproject.org/paste/3gBAg4TNAkxM~g4UlBICEg/raw
then, with no modification, logging on tty5 as tux, then entering startx, xorg.log:
https://paste.fedoraproject.org/paste/Lfu7fQea3JpSu61aIwuYmQ/raw
just note :
every time on liveusb i removed now the home= and replaced it by screen=text
for each xorg log report to do, i just cp /var/log/xorg.* /media/usb
because it happen sometimes there are two or three files (dont ask me why, i just seen that)
Offline
next uses modsetting with correct resolution..... it does not use the intel driver
give me the name of the laptop
and give me the output of dmesg - in terminal - you can use next or rolling.....
dmesg > dmesg.txt and you find it in /home/tux
EDIT: and lspci -nn
Offline
you asked;
https://paste.fedoraproject.org/paste/n~d3H~OiqPL5foUuKaFzHQ/raw
https://paste.fedoraproject.org/paste/mh8F6oIggk7iX~y0JxBgbA/raw
Offline
the N2600 has no intel grafic card - it has a PowerVR SGX 545 grafic unit.
its closed source and does not work with intel driver...
it only works with modesetting - in rolling only with 800 x 600 and with next it will work with correct resolution......
https://wiki.archlinux.org/index.php/Intel_GMA_3600
Offline
hi kultex
ty for the reply
so is there a way to keep all settings/data from taz5 for upgrading to next?
is there a way eg to just rename old folders from slitaz 5 and install next on the same partition?
what would be the right idea to avoid terrible mess of migration/reinstallation?
Offline
first you have to check if all programs you need are working - next is in a very early state. I use next with my dell celeron CPU.
I use for intenet palemoon from i-juriy
http://forum.slitaz.org/topic/small-repo-of-my-tazpkgs-маленький-репо-моих-пакетов
and the best way - I do it like this - save the tux folder on usb disk and play it afterwars back - if you use home= then you can use it also in next.....
Offline
i think i will have to try another / partiton for it..
Offline
@kultex : there is no way to take drivers, kernel from next, and to use them with slitaz5?
cause dropbear just doenst want to start, things like this on next..
Offline
ps2 kultex :
there is absolutely noway to force the 1024x600 resolution in taz5?
it would be very useful
Offline
as fare as I know- no way to get the proper resolution before Kernel 3.5
Offline
hi kultex
thank you for the reply
is there a way to install the 3.5 kernel on taz5?
Offline
No you have to wait for next and use in the meantime another Linux
Offline
So summarizing, kernel incompatibility and issue with non-free drivers.
Could all of this have to do with this?
http://forum.slitaz.org/topic/insatlling-nvidia-driver
Tested on latest Slitaz 5.0
Offline
i dont know but if a new linux kernel is asked, it would be a deep pressure to release a new iso with it..
Offline
[ Generated in 0.017 seconds, 7 queries executed - Memory usage: 1.55 MiB (Peak: 1.77 MiB) ]