Touchscreen does not work

Ceel · 2019-12-14 18:58:49

Hello,

I can't have my touchscreen working in Rolling.

I installed linux-input-touchscreen and had a look at the installed files but no driver related at an Elan touchscreen.

My [c]lsusb[/c]

[c]Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 001 Device 005: ID 04f2:b452 Chicony Electronics Co., Ltd

Bus 001 Device 016: ID 04f3:2022 Elan Microelectronics Corp.

Bus 001 Device 007: ID 1aa6:0201 eFortune Technology Corp.

Bus 001 Device 004: ID 0489:e078 Foxconn / Hon Hai

Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub[/c]

Is there a chance I can do it working?

kultex · 2019-12-16 09:34:55

does it work in next? - in my rootfs linux-input-touchscreen is included. My touch on the Acer works in next

it would be nice to get both dmesg outputs

kultex · 2019-12-16 10:31:55

I hope, this is myy touchscreen and not the touchpad...

EDIT: the elantec might be your touchpad and not the touchscreen

the elantec touchpad is not correct in next

Ceel · 2019-12-16 21:20:20

Yes, the touchscreen works fine in Next; I even don't need to install linux-input-touchscreen. Probably because [c]CONFIG_TOUCHSCREEN_ELAN=m[/c].

Nothing concerning the touchscreen in the .log of Rolling.

In Next, my Xorg.0.log looks like yours; nothing in dsmeg but something very similar in messages.

kultex · 2019-12-17 06:46:25

and it cannot work in rolling, because it is just available from 3.19 and not 3.16

https://cateee.net/lkddb/web-lkddb/TOUCHSCREEN_ELAN.html

you dont see it in the dmesg.log, because it stops to early (no idea why) - run dmesg > dmesg.txt

and you will find it....

SliTaz Forum