SliTaz Forum

gibor

Moderator

Registered: 2011-04-30

Posts: 1,067

Bluetooth driver 4324A-BRCM1032

Hi, I have this bluetooth that works funny. It sends files to android devices but does not receive them (connection failed).

Using other devices (old cell phones) it works both ways.

It is not an internal software problem in slitaz, because if I apply a bluetooth usb stick, everything works fine.

The notebook is a Toshiba Satellite Pro A300, and the integrated peripheral from the label below shows QDS-BRCM1032

tux@slitaz:~$ lspci -nnk | grep -iA3 net; lsusb; hciconfig -a; rfkill list all;

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

hci0:   Type: BR/EDR  Bus: USB

        BD Address: 00:03:7A:98:DA:10  ACL MTU: 1021:6  SCO MTU: 64:1

        DOWN

        RX bytes:467 acl:0 sco:0 events:18 errors:0

        TX bytes:317 acl:0 sco:0 commands:18 errors:0

        Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x79 0x83

        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3

        Link policy: RSWITCH HOLD SNIFF PARK

        Link mode: SLAVE ACCEPT

0: hci0: Bluetooth

        Soft blocked: no

        Hard blocked: no

1: phy0: Wireless LAN

        Soft blocked: no

        Hard blocked: no

https://industrycanada.co/4324A-BRCM1032

https://github.com/winterheart/broadcom-bt-firmware

Is there a firmware somewhere for you to upload it?

I couldn't find it anywhere...

Thanks in advance!