SliTaz Forum

aniguenni

Member

Registered: 2011-12-18

Posts: 153

Re: SliTaz on ODYS WinPad V10 - no screens found

@Ceel

finally, i could startx by configuring xorg with fbturbo ;-)

Now i have to figure out, how to get all the stuff running such as the wireless module, memory cards, touch screen and other modules. I still keep on testing, because i really want this amazing os running on my ODYS WinPad V10

Ceel

Administrator

Registered: 2011-04-02

Posts: 1,424

Re: SliTaz on ODYS WinPad V10 - no screens found

Hi aniguenni,

Good to know!

I remembered having a computer (Acer Aspire v3 111p) "on boarding" a few years ago and got the problem with [c]iosf_mbi_pci[/c] module too; though this didn't create any troubles to boot SliTaz as well as in frugal as from ISO.

Here is the return of [c]lspci[/c] on this computer:

[c]00:00.0 Host bridge [0600]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register [8086:0f00] (rev 0e)
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0e)
00:13.0 SATA controller [0106]: Intel Corporation Atom Processor E3800 Series SATA AHCI Controller [8086:0f23] (rev 0e)
00:14.0 USB controller [0c03]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series USB xHCI [8086:0f35] (rev 0e)
00:1a.0 Encryption controller [1080]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine [8086:0f18] (rev 0e)
00:1b.0 Audio device [0403]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller [8086:0f04] (rev 0e)
00:1c.0 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 1 [8086:0f48] (rev 0e)
00:1c.1 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 2 [8086:0f4a] (rev 0e)
00:1c.2 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 3 [8086:0f4c] (rev 0e)
00:1d.0 USB controller [0c03]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series USB EHCI [8086:0f34] (rev 0e)
00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit <strong>[8086:0f1c]</strong> (rev 0e)
00:1f.3 SMBus [0c05]: Intel Corporation Atom Processor E3800 Series SMBus Controller [8086:0f12] (rev 0e)
02:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01)
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)[/c]
This was the same SoC than yours. Your computer is not really cooperative...

i don't really understand, if it woud make any difference to boot from hd or from pendrive.

The goal is simply to have a stick that allows to boot frugal installs on your HD without the need to install a distro.

aniguenni

Member

Registered: 2011-12-18

Posts: 153

Re: SliTaz on ODYS WinPad V10 - no screens found

@Ceel

Thanks for your reply. I understand.

Unfortunately the system doesn’t recognise my hd (it’s a built in 32G emmc flash memory).

By now focussing to get the wifi working. But no success to get the module (r8723bs) loaded.

aniguenni

Member

Registered: 2011-12-18

Posts: 153

Re: SliTaz on ODYS WinPad V10 - no screens found

still sticking on get the modules detected. i think, the main thing is the linux kernel 3.16.55, which doesn't detect the bay trail or the cherry trail architecture.

i read sthg about iosf_mbi_pci gets recognized from 3.17.x onwards. maybe this is the main goal?

Now i ask, if anybody knows, how to get a newer linux kernel onto this system without having internet on the running slitaz rolling system?

The slitaz-next iso doesn't start on this uefi :-( and i still don't want to give up this project to get this amazing os running on both of my machines