SliTaz Forum

erdosain9

Member

Registered: 2011-05-10

Posts: 37

Sound Card does not work

Hey.

I have a machine with an integrated sound card (broken) So I put another sound card (pci).

The sound does not work on SliTaz, is it because the machine is taking the card broken?

How do I set up the other card?

Greetings and thanks

This is a bad Google translation

mojo

Administrator

Registered: 2011-03-29

Posts: 2,174

Re: Sound Card does not work

Turn off the audio chipset on the motherboard in the bios.

lspci -nn

Verify you only see one audio device listed.

erdosain9

Member

Registered: 2011-05-10

Posts: 37

Re: Sound Card does not work

Hello!

Now I'm not on that machine. But I'm pretty sure it's this model:

VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio

Greetings and thanks!

erdosain9

Member

Registered: 2011-05-10

Posts: 37

Re: Sound Card does not work

Hey.

I had said, that's the card ... I did lspci-nn

"Multimedia audio controller [0401]: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller [1412:1724] (rev 01)"

What could I do?

mojo

Administrator

Registered: 2011-03-29

Posts: 2,174

Re: Sound Card does not work

What version, slitaz 4.0 or cooking?

If it's cooking sound is broken on all my computers.

Slitaz-4.0 :

alsamixer  => Volume up unmuted.

Post output:

aplay -L

aplay -l

erdosain9

Member

Registered: 2011-05-10

Posts: 37

Re: Sound Card does not work

I think it's 4.0 ... because I installed a while ago and I do not remember...

aplay -L:

null

    Discard all samples (playback) or generate zero samples (capture)

default:CARD=ICE1724

    ICEnsemble ICE1724, ICE1724

    Default Audio Device

front:CARD=ICE1724,DEV=0

    ICEnsemble ICE1724, ICE1724

    Front speakers

surround40:CARD=ICE1724,DEV=0

    ICEnsemble ICE1724, ICE1724

    4.0 Surround output to Front and Rear speakers

surround41:CARD=ICE1724,DEV=0

    ICEnsemble ICE1724, ICE1724

    4.1 Surround output to Front, Rear and Subwoofer speakers

surround50:CARD=ICE1724,DEV=0

    ICEnsemble ICE1724, ICE1724

    5.0 Surround output to Front, Center and Rear speakers

surround51:CARD=ICE1724,DEV=0

    ICEnsemble ICE1724, ICE1724

    5.1 Surround output to Front, Center, Rear and Subwoofer speakers

surround71:CARD=ICE1724,DEV=0

    ICEnsemble ICE1724, ICE1724

    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers

iec958:CARD=ICE1724,DEV=0

    ICEnsemble ICE1724, ICE1724

    IEC958 (S/PDIF) Digital Audio Output

aplay -l

**** List of PLAYBACK Hardware Devices ****

card 0: ICE1724 [ICEnsemble ICE1724], device 0: ICE1724 [ICE1724]

  Subdevices: 1/1

  Subdevice #0: subdevice #0

card 0: ICE1724 [ICEnsemble ICE1724], device 1: ICE1724 IEC958 [ICE1724 IEC958]

  Subdevices: 1/1

  Subdevice #0: subdevice #0

and now what?

erdosain9

Member

Registered: 2011-05-10

Posts: 37

Re: Sound Card does not work

Hi, I just saw and is the cooking version ...

What I can do about it?

Greetings and thanks

mojo

Administrator

Registered: 2011-03-29

Posts: 2,174

Re: Sound Card does not work

Post the output:

uname -a

erdosain9

Member

Registered: 2011-05-10

Posts: 37

Re: Sound Card does not work

This was the result

Linux 6.2.37-SliTaz system # 2 SMP Wed Mar 7 10:36:39 CET 2012 i686 GNU / Linux

And now ...?

mojo

Administrator

Registered: 2011-03-29

Posts: 2,174

Re: Sound Card does not work

Everything looks ok and you've checked alsamixer, unmute.volume levels,speakers ?

Did your sound used to work?

Your now running Stable 4.0:

root@slitaz:/media/disk/boot/packages/software# uname -a

Linux slitaz 2.6.37-slitaz #2 SMP Wed Mar 7 10:36:39 CET 2012 i686 GNU/Linux

cat /etc/slitaz-release

Should say:

4.0

If this says cooking then:

tazpkg set-release 4.0

Check /var/log/tazpkg.log

If you've installed any tazpkgs since April 9 when the cooking repo switch to the new kernel

they could have broken your sound.