SliTaz SliTaz Forum

You are not logged in.

#1 2011-05-14 14:40:02

Guest
Guest

sas 5/i drivers ?

hi

attempting to run a slitaz 3 cooking on a dell t3500 w/ perc 5i SAS controller, last 2.6.37 kernel : disk not found.

with another linux distrib, disk seem to be available through mpt* modules but no luck with slitaz.

could i fild such drivers somewhere for slitaz kernel ?

thanks in advance

#2 2011-05-14 15:42:30

mojo
Administrator
Registered: 2011-03-29
Posts: 2,173

Re: sas 5/i drivers ?

Open terminal:

lspci -nn

Post output so we can identify the hardware.

Online

#3 2011-05-23 16:44:12

Guest
Guest

Re: sas 5/i drivers ?

sorry, could not access the hardware before today

involved SCSI controller is

07:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS [1000:0054] (rev 01)

there is another controller without disks, but SCSI disks are needed for this machine

thank you very much for your support!

complete lspci -nn output :

00:00.0 Host bridge [0600]: Intel Corporation X58 I/O Hub to ESI Port [8086:3405] (rev 13)

00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13)

00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13)

00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13)

00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13)

00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13)

00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13)

00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37]

00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38]

00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39]

00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c]

00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]

00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1 [8086:3a40]

00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 6 [8086:3a4a]

00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34]

00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35]

00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36]

00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a]

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90)

00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]

00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 SATA RAID Controller [8086:2822]

00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]

01:00.0 PCI bridge [0604]: Integrated Device Technology, Inc. PES12N3A PCI Express Switch [111d:8018] (rev 0e)

02:02.0 PCI bridge [0604]: Integrated Device Technology, Inc. PES12N3A PCI Express Switch [111d:8018] (rev 0e)

02:04.0 PCI bridge [0604]: Integrated Device Technology, Inc. PES12N3A PCI Express Switch [111d:8018] (rev 0e)

03:00.0 Ethernet controller [0200]: Intel Corporation 82571EB Gigabit Ethernet Controller (Copper) [8086:10bc] (rev 06)

03:00.1 Ethernet controller [0200]: Intel Corporation 82571EB Gigabit Ethernet Controller (Copper) [8086:10bc] (rev 06)

04:00.0 Ethernet controller [0200]: Intel Corporation 82571EB Gigabit Ethernet Controller (Copper) [8086:10bc] (rev 06)

04:00.1 Ethernet controller [0200]: Intel Corporation 82571EB Gigabit Ethernet Controller (Copper) [8086:10bc] (rev 06)

05:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:06fd] (rev a1)

06:00.0 PCI bridge [0604]: Intel Corporation 6702PXH PCI Express-to-PCI Bridge A [8086:032c] (rev 09)

07:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS [1000:0054] (rev 01)

09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5761 Gigabit Ethernet PCIe [14e4:1681] (rev 10)

#4 2011-05-23 21:52:02

mojo
Administrator
Registered: 2011-03-29
Posts: 2,173

Re: sas 5/i drivers ?

I found 3 Linux Kernel config options for the pci.ids 1000:0054 in the linux kernel driver database.

lkddb pci 1000 0054 .... .... ...... :: CONFIG_FUSION CONFIG_FUSION_SAS CONFIG_I2O

tux@slitaz:~$ uname -a

Linux slitaz 2.6.30.6-slitaz #1 SMP Sun Jan 3 20:16:03 CET 2010 i686 unknown

I got one match on fusion none on sas or I20

tux@slitaz:~$ zcat /proc/config.gz | grep -i fusion

# CONFIG_FUSION is not set

You would have to compile a custom kernel since it is not set.

There is a guide here:

http://doc.slitaz.org/en:guides:kernel

Online

#5 2011-05-26 04:20:01

Guest
Guest

Re: sas 5/i drivers ?

recompiling the kernel did the trick and resolves some other issues with modules architectures

thanks a lot for your link

Registered users online in this topic: 0, guests: 1
[Bot] ClaudeBot

Board footer

Powered by FluxBB
Modified by Visman

[ Generated in 0.027 seconds, 7 queries executed - Memory usage: 1.54 MiB (Peak: 1.77 MiB) ]