SliTaz Forum

hsuanyeh

Member

Registered: 2011-05-18

Posts: 1

Open-iscsi Error

Hi there!

I booted Slitaz Live CD and installed open-iscsi by entering below command:

  root@slitaz:~# tazpkg get-install open-iscsi

After installation, I tried to find my iSCSI targets using below command:

  root@slitaz:~# iscsid

  root@slitaz:~# iscsiadm -m discovery -t sendtargets -p 192.168.1.6

but get these error messages:

  iscsiadm:  can not connect to iSCSI daemon (111)!

  iscsiadm:  Could not scan /sys/class/iscsi_transport.

  iscsiadm:  Could not scan /sys/class/iscsi_transport.

  iscsiadm:  can not connect to iSCSI daemon (111)!

  iscsiadm:  Cannot perform discovery.  Initiatorname required.

  iscsiadm:  Discovery process to 192.168.1.6:3260 failed to create a discovery session.

  iscsiadm:  Could not perform SendTargets discovery.

I asked this same question with open-iscsi mailing list and one developer suggested that I do

  root@slitaz:~# modprobe iscsi_tcp

before iscsiadm.  I did it by first installing "module-init-tools"

  root@slitaz:~# tazpkg get-install module-init-tools

and then "modprobe iscsi_tcp" gives below error message:

scsi_transport_iscsi: version magic '2.6.37-slitaz SMP mod_unload 386 ' should be '2.6.37-slitaz SMP mod_unload 486 '

WARNING: Error inserting libiscsi (/lib/modules/2.6.37-slitaz/kernel/drivers/scsi/libiscsi.ko.gz): Invalid module format

WARNING: Error inserting libiscsi_tcp (/lib/modules/2.6.37-slitaz/kernel/drivers/scsi/libiscsi_tcp.ko.gz): Invalid module format

FATAL: Error inserting iscsi_tcp (/lib/modules/2.6.37-slitaz/kernel/drivers/scsi/iscsi_tcp.ko.gz): Invalid module format

What could go wrong?  Thanks in advance!