SliTaz Forum
You are not logged in.
Hi SliTaz Forum,
A new Cooking have just reach the main mirror! It as a lot of new work and use our fresh and new packages builded on Tank with cookutils. You can find the official announce on the main website:
http://www.slitaz.org/en/#news
Direct download: http://mirror.slitaz.org/iso/cooking/slitaz-cooking.iso
As usual we need your help and feedback to improve it and fix any bugs. Since we use a frozen wok (no update to main and important packages) from a while now and blending iso have been quiet well tested it is the last Cooking before RC series for next stabel 4.0 version.
- Christophe
Offline
Hi:
I have installed the new cooking version and everything was ok.
After rebooting the system i can't do nothing.I just see lines at my monitor,the keyboard does not work...nothing.
This is my lspci:
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82562V-2 10/100 Network Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3600 Series
01:00.1 Audio device: ATI Technologies Inc RV635 Audio device [Radeon HD 3600 Series]
Many times, trying to configure the ATI vga using the slitaz control box ( with the old coking version ) i have the same problem after rebooting the system.
Now i am using the same hardisk in another machine ( with an Intel Corporation 82945G/GZ ) and i have not problem.
How can I make the ATI working?
Sorry about my english.
Thanks a lot.
Arf... Difficult to help with a lspci. So the LiveCD boot ok with everthing working ? But only after install everthings break ? After install you can boot in text mode to access a tty and maybe try to debug that. To boot in text mode you must add an option to kernel command line (in Grub press 'e' to edit a entry) and add the option: screen=text
After booting to text mode you may start by looking to /etc/X11/xorg.conf.d diretory content since the screen and keyboard setting for X are in there. You may also try to lauch 'tazx' in text mode to install Xorg ATI driver and then start Slim or 'startx'.
Offline
Hi Pansko
Frugal + eee : boot well , looks like modules are loaded during boot time ..
.. but no .. no sound and no network working during X session
I've copy paste the bzimage, the vmlinuz and the rootfs.gz in the boot folder
Is it related with the fact that u moved the modules inside the rootfs.gz as
said in your announcement ?
Hi,
the new cooking works well but:
1)there is the same issue of slitaz-blending with X that doesn't work with i915 and without xfree86-intel;
2)i couldn't see at the beginning italian locale option, but maybe it's normal 
Daniele
Offline
Hi,
@moulefrite: Blending was ok no ? Modules was always in rootfs.gz as all the system. Does 'modprobe -l' list your module ? You can use grep to get the name: modprobe -l | grep modname. Also is alsamixer showing you sound card volume (they may be down, I just found a bug about missing /var/lib/alsa, this is where also store the sound card settings ?)
@Daniel: I finaly had to use xorg-server (the light version is nor ready) and if I dont put libdrm Xorg is very slow. But if we user light Xorg without any drm support it will not solve you problem ? We may have to create a new official flavor with all Xorg drivers and mesa ?
For Italian... my bad. I include all translated file but forgot to add glibc it_IT files so localedef can generate locale at boot. Here is the fix: http://hg.slitaz.org/wok/rev/2707984d98ec
- Christophe
Offline
@pankso
if we used xorg without any drm support and without i915 i think there would be no problem, the problem i think is with xorg-server-libdrm-libdrm-intel-i915 and without: mesa,mesa-dri-intel,xorg-xf86-video-intel; i don't know if we used xorg without any drm support, but i can try.
Maybe a new flavor wouldn't be bad, or a ready to use pkg.
ok for italian.
Daniele
Offline
Hi, I had a few problems with intel card, but screen=text, tazx, install intel-driver, slim start fixed that. Now my netbook looking (and working) great!
Problems with nvida card, loads the nouveau driver, unable to fix yet.
Paul
PS: /etc/group missing tux!
Offline
Offline
Hi
I noticed this when downloading mpd, ncmpcpp, etc.
Adding: tux:x:1000: to /etc/group fixes the packages when they install.
Offline
Hi,
Last slitaz and ASUS EEEPC 901...all ok, the booting without problems but just finishing and waiting for the screen first begin... but no screen!!
Only black screen without any cursor blink or any other sign!!
Booting from sd with unetbootin
Help
Hi again:
I am using just the live cd now am i could see few things.
Flash palyer it is not working...after install it.It's asking me about to update it at youtube and at any web using it i can't play the videos.
Playing a video with smplayer there is a gap between the sound and the video.
Pcmanfm does not automount the usb disks.Mounting it it with mountbox works but i can't see the disk at the left panel.
Trying to download files with tazweb and midori it does not work
Launching midori from terminal i got this:
tux@slitaz:~$ midori
** (midori:24814): WARNING **: Error loading plugin: libaspell.so.15: cannot open shared object file: No such file or directory
** (midori:24814): WARNING **: Error: JSON.parse requires at least one parameter
(midori:24814): GLib-CRITICAL **: g_key_file_load_from_data: assertion `data != NULL' failed
** (midori:24814): WARNING **: No hay ningún archivo de cerficado raíz disponible. Los certificados SSL no se pueden verificar.
with tazweb:
tux@slitaz:~$ tazweb
** (<unknown>:24887): WARNING **: Error loading plugin: libaspell.so.15: cannot open shared object file: No such file or directory
Hi:
Sorry to open a new post,but I can't edit the last one.
Using the live cd i can't get into yahoo gmail or hotmail:
TLS/SSL support not available; install glib-networking
I have try tazx to know it my vga is working or not before to install slitaz to the disk.
xorg-xf86-video-ati (6.14.1) is installed.
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/slitaz:1
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X.Org X Server 1.9.4
Release Date: 2011-02-04
X Protocol Version 11, Revision 0
Build Operating System: SliTaz GNU/Linux
Current Operating System: Linux slitaz 2.6.37-slitaz #2 SMP Sat May 21 19:25:28 CEST 2011 i686
Kernel command line: initrd=/boot/rootfs.gz rw root=/dev/null vga=normal autologin BOOT_IMAGE=/boot/bzImage
Build Date: 23 May 2011 06:28:59PM
Current version of pixman: 0.22.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Tue Jan 2 03:40:31 2007
List of video drivers:
ati
radeon
vesa
(++) Using config file: "/root/xorg.conf.new"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting.
Xorg detected your mouse at device /dev/input/mice.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.
Your xorg.conf file is /root/xorg.conf.new
To test the server, run 'X -config /root/xorg.conf.new'
root@slitaz:~#
Loging out the session i can't go back to sart a new one...frequency not supported.
using the hardinfo app the resolution is 1600 x 1200.
At /etc/X11/xorg.conf.d/50-Monitor.conf i have this:
Section "Monitor"
#DisplaySize 470 270 # mm
Identifier "Monitor0"
VendorName "ACR"
ModelName "V223HQ"
HorizSync 31.0 - 84.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
at screen.conf:
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
At device.conf:
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "CustomEDID" # [<str>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
#Option "NewPLL" # [<bool>]
#Option "ZaphodHeads" # <str>
Identifier "Card0"
Driver "radeon"
BusID "PCI:1:0:0"
EndSection
at module.conf:
Section "Module"
Load "dbe"
Load "dri2"
Load "extmod"
Load "dri"
Load "record"
Load "glx"
EndSection
Even with the livecd sometimes it get freezes before to start.
I hope all of this information could be useful for you.
I am using archlunux now.just waiting to move to slitaz.
I really like your distribution.Amazing.
Thanks a lot.
Hi,
Frugal install on Thinkpad 600e (300MHz P2, neomagic video.) Does not boot into gui (same as 3.0 release & last cooking.) Works fine in command line mode, except tazx does not give any options except quit so I cannot configure the graphics card driver.
Also, trying to run tazinst fails with -m illegal option when using:
[c]tazinst cli -i -t iso -m slitaz-cooking.iso -p /dev/hda5 -f ext4[/c]
tried adding path to filename, same error
Frugal install by overwrite March 2011 cooking. Wow! Finest OS ever. All I ever wanted. Tried them all - Linux & MS. Instant everything. A miracle of perfection. Went to D/L packages. Locked up. Deleted all. Started again. Nothing. Can not locate another March 2011 to D/L & overwrite. Hours later - nothing but a blank screen. But I did experience a few minutes of the finest OS on the planet.
My computer:
Processor : Intel(R) Pentium(R) 4 CPU 2.66GHz
Memory : 252MB (94MB used)
Operating System : Puppy Linux 0.43
User Name : root (root)
Date/Time : Wed 01 Jun 2011 09:51:58 AM GMT+5
-Display-
Resolution : 800x600 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH4 - Intel 82801DB-ICH4
-Input Devices-
AT Translated Set 2 keyboard
ImPS/2 Generic Wheel Mouse
Power Button
Power Button
PC Speaker
-Printers (CUPS)-
CUPS-PDF : <i>Default</i>
-SCSI Disks-
ATA WDC WD1600BEVE-0
HL-DT-ST RW/DVD GCC-4243N
Offline
Update on thinkpad 600e:
tazinst worked using a config file. Continues to fail using cli, -m illegal option
once installed I ran tazx OK. Seems it requires network access, and wireless wasn't setup yet. tazx worked installing the driver but did not modify the xorg.conf.d scripts correctly, same as old cooking. After manually editing /etc/X11/xorg.conf.d/60-Devices.conf to reflect correct video driver and rebooting X worked. Reboot was required because startx didn't work and it was quicker than troubleshooting what was running that was in the way.
once X worked I had trouble with tazpanel. First I struggled with the username/password issue. Once I resolved that I tried to recharge then update. Recharge seemed to work but update failed to download files and showed keycodes rather than characters (e.g. "%2" rather than "/")
last post con't:
tazpkg works fine, upgrades 11 packages fine. Still get tazpkg errors e.g. can't create upgradable-packages.list-processed, still doesn't seem to matter.
After upgrade packages system asking me to choose the sound card on every boot. I am not sure it that happened before upgrading alsa. Still working on solution. Sound does work fine though, just like every distro the ac97 tries to load and fails, but the proper driver does load and works fine.
Still need to test grfxpayload= in grub2. This thinkpad is booting using grub2, but I currently have it configured with the deprecated vga= format as has been required to date. I really hope this feature gets into this version.
Wireless doesn't work. broadcom driver gives unrecognized phy error. Also tried 2 other usb radios, both fail. realtek driver crashes. zd1211rw driver loads but also fails to connect to network. The zw1211rw device is flaky but usually works, the other 2 always work. All 3 work in antiX installed in another partition. Also when wireless is set to yes wired network doesn't work. Interface eth0 becomes listed as a woreless interface and doesn't get configured. Another feature that is really important that slitaz does not have is support for multiple network cards. Even a wired and wireless interface both configured on the same machine causes problems.
tazpkg recharge/upgrade again, 3 more packages. No longer asks to configure sound.
Impressions so far:
The good/great:
Overall seems to feel slightly less responsive than previous cooking but is it just as fast as before. Like the new look, starting to look polished. Tazpanel seems like a good change. No udev errors!!
The bad/ugly:
Wish the password for the tazpanel app would update with the install script at least. support for multiple net interfaces, at least one wired one wireless, but there should be an easy way to have more than one of each. Reconfigure xorg requires network if the gui does not come up. Difficult to configure wireless without gui, so wired network usually required to fix xorg drivers before wireless can be configured, then wired network will no longer work, whether wireless configuration works or not. If wireless fails, must be disabled to reenable wired ethernet.
---
to be continued...
how to install flash:
su
tazpkg get-install get-flash-plugin && get-flash-plugin
http://doc.slitaz.org/en:guides:flash
it seem tazpanel does not execute second get-flash-plugin
also opera install does not work:
mv: cam't rename 'opera-11.50.1027/fs/usr/share/opera/locale': no such file or directory
Offline
Also, trying to run tazinst fails with -m illegal option when using:
tazinst cli -i -t iso -m slitaz-cooking.iso -p /dev/hda5 -f ext4
There's a bug in tazinst usage, the option for Source media is -s, so the command should be:
tazinst cli -i -t iso -s slitaz-cooking.iso -p /dev/hda5 -f ext4
Offline
thanks guys! For me it's an honor to see my work here.
have not been very much at home but now II will startworking on GYK / Openbox . See you soon guys!
Offline
any answer to my asus eeepc 901 start problem?
Thanks
jtouso
"any answer to my asus eeepc 901 start problem?
Thanks"
yep, same on my eee . Either the screen is just black , either it has something messy where you can
just see some horizontal movements of your mouse.
I've always said that a basic xvesa flavor could be the the most compatible way for the first step , than
a optional second step include a Xorg+Configuration-driver with an auto-uninstall of Xvesa
For the problem, I can say that before I done a full Live Usb (which doen't work) I had done before just a replacement of the rootfs.gz with the new one : it leads to have a graphic session but with no modules working
(no sound, no ethernet connection)
Attempted install of wicd to resolve wifi issues. wicd installed but wicd-gtk would not accept any root password (correct one, "root", user password, empty). su to root and wicd-gtk fails with python errors.
still no wifi.
jtouso & moulefrite:
When you boot to black screen usually it is a graphics problem. You may be able to boot the machine with screen=text on kernel command line. Or, can you get to a text console (ctr-alt-f1) from the blank screen? If you can, and you have a network connection, you can then run tazx to change the graphics driver.
Ctrl+alt+f1 don´t have any answer.
Reboot again with screen=text arrives to login but ...how can I connect to internet to run tazx?
May I put any order on kernel command line at the boot ?
[ Generated in 0.018 seconds, 7 queries executed - Memory usage: 1.61 MiB (Peak: 1.77 MiB) ]