SliTaz Forum

Ernst

Member

Registered: 2012-07-28

Posts: 35

Problem with USB Multi-Card-Reader

Hello,

yes for the 3rd time this afternoon... But have another problem. On my compi (Fujitsu Siemens with an

CPU Typ DualCore Intel Pentium E2160, 1800 MHz (9 x 200), Motherboard Name FUJITSU SIEMENS D2317-A2) I have an Multi-Card-Reader installed (connected to one of the internal USB ports). Booting with Windows XP everything is working fine.

Installed SliTaz 4.0 from SliTaz Packages DVD and the MCReader is not recognized. Seems when booting SliTaz "tries to do something with it":

Aug  6 17:57:25 (none) user.err kernel: hub 2-0:1.0: unable to enumerate USB device on port 6

Aug  6 17:57:25 (none) user.info kernel: usb 2-6: new high speed USB device using ehci_hcd and address 40

Aug  6 17:57:25 (none) user.err kernel: hub 2-0:1.0: unable to enumerate USB device on port 6

Aug  6 17:57:25 (none) user.err kernel: hub 2-0:1.0: unable to enumerate USB device on port 6

Aug  6 17:57:25 (none) user.err kernel: hub 2-0:1.0: unable to enumerate USB device on port 6

Aug  6 17:57:25 (none) user.err kernel: hub 2-0:1.0: unable to enumerate USB device on port 6

Aug  6 17:57:25 (none) user.err kernel: hub 2-0:1.0: unable to enumerate USB device on port 6

Aug  6 17:57:26 (none) user.info kernel: usb 2-6: new high speed USB device using ehci_hcd and address 45

Aug  6 17:57:26 (none) user.err kernel: hub 2-0:1.0: unable to enumerate USB device on port 6

Aug  6 17:57:26 (none) user.err kernel: hub 2-0:1.0: unable to enumerate USB device on port 6

Aug  6 17:57:26 (none) user.err kernel: hub 2-0:1.0: unable to enumerate USB device on port 6

Aug  6 17:57:26 (none) user.err kernel: hub 2-0:1.0: unable to enumerate USB device on port 6

Aug  6 17:57:26 (none) user.err kernel: hub 2-0:1.0: unable to enumerate USB device on port 6

Aug  6 17:57:27 (none) user.err kernel: hub 2-0:1.0: unable to enumerate USB device on port 6

Aug  6 17:57:27 (none) user.info kernel: usb 2-6: new high speed USB device using ehci_hcd and address 51

...

endless messages like the above.

Whats wrong what can I do? It would be very helpful for me to have access to this MCReader when in SliTaz.

Regards Ernst