SliTaz Forum

totoetsasoeur

Moderator

Registered: 2011-03-29

Posts: 247

slitaz 4 - lspci => no output

Hi,

I have problem with Ethernet chip on my laptop when using Slitaz 4. When investigating I found that lspci returns nothing...

However everything works fine on slitaz 3. When typing as root on slitaz 3:

[c]#lspci -nn | grep -i eth
Ethernet controller: Intel Corporation 82566MM Gigabit Network ...[/c]
But the same command on slitaz 4, gives no output at all!!

Any hint's welcomed.

mojo

Administrator

Registered: 2011-03-29

Posts: 2,174

Re: slitaz 4 - lspci => no output

# [c]tazpkg -gi pciutils --forced[/c]

# [c]tazpkg -gi pciids --forced[/c]

totoetsasoeur

Moderator

Registered: 2011-03-29

Posts: 247

Re: slitaz 4 - lspci => no output

thx mojo, followed your hints and it works. :-)