SliTaz Forum
You are not logged in.
Pages: 1
I was able to boot slitaz live on my Viao S260, but the display does not fill the full screen.
xrandr -q report 800x600 as the maximum resolution.
Is there a driver I should install to use the full display ?
Thank you
Offline
Post the kernel version and graphics chipset manufacturer and product identification output:
Open xterm:
uname -a
lspci -nn | grep -i VGA
Offline
the uname -a command outputs
Linux slitaz 2.6.30.6-slitaz #1 SMP Sun Mar 28 16:39:51 CEST 2010 i686 unknown
The lspci command outputs the following
VGA compatible controller [0300] : ATI Technologies Inc M9+ 5C61 [Radeon Mobility 9200 ]
(AGP)] [1002:5c61] (rev 01)
Offline
The 1002:5c61 RV280 graphics chip use's the radeon driver which is in the xorg-xf86-video-ati-6.9.0.tazpkg
Follow these steps:
Open xterm,su,password:root
#tazpkg get-install linux-agp
#tazhw detect-pci
Use the tazx script which will download/install the ati driver and autoconfigure /etc/X11/xorg.conf
Kill the xserver,Ctrl+Alt+Bkspc,Login root,Password root
#tazx
Choose ati
Reboot
Offline
Pages: 1
[ Generated in 0.016 seconds, 7 queries executed - Memory usage: 1.53 MiB (Peak: 1.77 MiB) ]