SliTaz Forum
You are not logged in.
hi all,
i still can not use my internal sd-card-reader. i installed linux-mmc and tried keucr from mojo, but still nothing happens. does anybody knows, how can i activate my multi-card-reader port on my fujitsu-siemens lifebook p7010?
i followed the instructions from http://forum.slitaz.org/topic/error-unable-to-locate-ioapci-for-gsi
The outputs actual are now as follows:
root@slitaz:/home/tux# lsmod
Module Size Used by Tainted: G
sdhci_pci 5245 0
sdhci 12287 1 sdhci_pci
sdio_uart 7919 0
mmc_block 7129 0
tifm_7xx1 3038 0
tifm_core 3181 1 tifm_7xx1
iwmc3200top 3599 0
mmc_core 41741 4 sdhci,sdio_uart,mmc_block,iwmc3200top
keucr 70523 0
michael_mic 1462 4
lib80211_crypt_tkip 6319 1
aes_i586 6816 1
aes_generic 25742 1 aes_i586
lib80211_crypt_ccmp 3397 1
cpufreq_conservative 6384 1
acpi_cpufreq 4333 0
mperf 867 1 acpi_cpufreq
ipw2200 108387 0
libipw 17987 1 ipw2200
cfg80211 99896 2 ipw2200,libipw
rfkill 10682 1 cfg80211
lib80211 2676 4 lib80211_crypt_tkip,lib80211_crypt_ccmp,ipw2200,libipw
pcmcia 24993 0
yenta_socket 16223 0
pcmcia_rsrc 6989 1 yenta_socket
pcmcia_core 8413 3 pcmcia,yenta_socket,pcmcia_rsrc
snd_intel8x0m 8083 0
snd_intel8x0 19786 1
snd_ac97_codec 77963 2 snd_intel8x0m,snd_intel8x0
ac97_bus 718 1 snd_ac97_codec
snd_pcm 43737 3 snd_intel8x0m,snd_intel8x0,snd_ac97_codec
snd_timer 12515 1 snd_pcm
snd 33394 7 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 3357 1 snd
snd_page_alloc 4853 3 snd_intel8x0m,snd_intel8x0,snd_pcm
i915 254040 2
drm_kms_helper 18798 1 i915
drm 111992 3 i915,drm_kms_helper
i2c_algo_bit 3479 1 i915
button 3602 1 i915
i2c_core 12192 4 i915,drm_kms_helper,drm,i2c_algo_bit
video 9783 1 i915
output 1144 1 video
intel_agp 7908 1 i915
intel_gtt 9214 3 i915,intel_agp
agpgart 18221 3 drm,intel_agp,intel_gtt
root@slitaz:/home/tux# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3580] (rev 02)
00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3584] (rev 02)
00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3585] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02)
00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02)
00:1d.0 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03)
00:1d.1 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03)
00:1d.7 USB controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 83)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 03)
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03)
01:0a.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ab)
01:0a.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ab)
01:0a.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 03)
01:0a.3 System peripheral [0880]: Ricoh Co Ltd R5C576 SD Bus Host Adapter [1180:0576] (rev 01)
01:0a.4 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592]
01:0d.0 Network controller [0280]: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection [8086:4223] (rev 05)
thank's in advance ;-)
Offline
as in my other post hope this helps
http://forum.slitaz.org/topic/rolling-multi-card-reader-android-phone-sd-card-proposed-fix#post-20814
Offline
Hi
I have an external multi-card reader and the only way to have it work is compiling the kernel with the option CONFIG_SCSI_MULTI_LUN=y
Have a nice day.
Offline
@yves04
thank's yves04 for your comment but i'm too newbie to compile the kernel myself.
maybe i will wait for the new release 5.0 and hope to get the internal ricoh card reader running with it. i use an usb card reader instead. all other stuff works pretty fine with my lifebook.
Offline
did you try appending
scsi_mod.max_luns=8
to the kernel options in grub or in
echo 8 > /sys/modules/scsi_mod/parameters/max_luns
while slitaz is running ?
Offline
Download attached sdricoh_cs-2.6.37.tazpkg
[c]# tazpkg install sdricoh_cs-2.6.37.tazpkg[/c]
[c]# modprobe sdricoh_cs[/c]
If it works but doesn't auto load on boot add to /etc/rcS.conf LOAD_MODULES=
Offline
@ernia
no, nothing happens by trying this two modes. :-(
@mojo
i did download and install the package and modprobe above, without any success.
do you guys think, that it has to do with the method of using slitaz? before i change anything on my installed version, i test always at the frugal version first. so i didn't try the suggestions on the installed version yet.
Offline
[ Generated in 0.024 seconds, 7 queries executed - Memory usage: 1.55 MiB (Peak: 1.77 MiB) ]