SliTaz Forum
You are not logged in.
Hi Arun,
yes in the 3.2.40-new.txt the ide issue is fixed - discussion about that is mainly here:
http://forum.slitaz.org/topic/notes-to-new-cooking/page/8 - this is the important link:
https://bugzilla.redhat.com/show_bug.cgi?id=694782
you can ignore the errors on Orphan module - and the errors on "cant open .... linux64"
you cant post txt files, thats a bug of the forum software - can you send the log file on the mailing list and I will put it here...
Offline
Hi Arun
log is attached now - that looks good - only linu64 errors - no
cat: can't open '/home/slitaz/wok/linux-acpi errors
now you should be able to run:
"for i in $(grep 'WANTED="linux"' */receipt | grep -v 64 | cut -d \/ -f 1); do cooker pkg $i; done"
run the command from the wok directory.
you should find all the necessary linux-packages.
the best would be now to make an iso with the new kernel using tazlito and put it online with something like www.box.com or just all the linux-xxx.tazpkgs - so I and others can test....
Thomas
Offline
Hi Arun
log is attached now - that looks good - only linu64 errors - no
cat: can't open '/home/slitaz/wok/linux-acpi errors
now you should be able to run:
"for i in $(grep 'WANTED="linux"' */receipt | grep -v 64 | cut -d \/ -f 1); do cooker pkg $i; done"
run the command from the wok directory.
you should find all the necessary linux-packages.
the best would be now to make an iso with the new kernel using tazlito and put it online with something like www.box.com or just all the linux-xxx.tazpkgs - so I and others can test....
Thomas
Offline
Hi Tom,
Please find the box link for the 3.2.48 kernel packages and log files
https://app.box.com/s/rq6qa6hhlg4bg23fm8hf
Upload is in progress so please try to access after some time.
Offline
box upload is failed somehow so i have compressed all package to a tar.bz2 archive and uploaded at dropbox. Beloe is the link to the folder containing the archive file.
https://www.dropbox.com/sh/0u36oacv453f8n4/og0oynswgG
Offline
I have uploaded the packages after building on kernel version 3.2.40 (with 3.2.40-new.txt config file that has the IDE isue fix) at the following location:
https://app.box.com/s/p2iuvt7azac8gyhav1bi
Offline
thx kapil and arun,
I have downloaded both and will try to make an iso as soon as possible - it can take a while - too much work at the moment
upload the log of 3.2.40 now, because it did not work last time
Thomas
Offline
Hi Arun and Kapil,
I have done isos from both kernels and sorry, I cannot upload, because all the cloud services are blocked where I am working.
And on both isos I get when I run "zcat /proc/config.gz" and I find
# CONFIG_IDE=y
so it is the same as I it is now in rolling - but it must be
# CONFIG_IDE is not set
sorry - I think it was my fault - in the attached file linux.slitaz.config.txt the config for ide is correct - 3.2.40-new.txt was one of my first tests....
it just comes when you answer just in between hundred things to do
Offline
Hi Tom,
OK.. I will use linux.slitaz.config.txt and start a fresh compilation.
Offline
Hi Arun,
just to help you for your decisions - here is the kernel.config from porteus... it has newer kernel
Offline
Hi Tom,
Anyway, here goes the package for 3.2.50 I have compiled:
https://app.box.com/s/jo2jeiqq86vypub3b8d7
It has the modified config, log, packages and the modified patch in it. Check it out.
(I missed the above sample config from you. Somehow I am not receiving the notifications though I have subscribed.)
Offline
I am revisiting the config options by comparing with those from the Porteus config file... so please discard the above package. I will upload the new set of packages in 1 or 2 days.
Offline
[ Generated in 0.018 seconds, 7 queries executed - Memory usage: 1.55 MiB (Peak: 1.77 MiB) ]