I searched the forum, but couldn't find the solution to my problem.
USB Live Slitaz 4.0
"lspci | grep -i network" outputs
03:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
"ifconfig" outputs
eth0 Link encap:Ethernet HWaddr 00:1B:38:9C:2E:1D
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9127 errors:0 dropped:24 overruns:0 frame:0
TX packets:8206 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9521233 (9.0 MiB) TX bytes:1106566 (1.0 MiB)
Interrupt:18
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
"ifconfig -a" outputs
dummy0 Link encap:Ethernet HWaddr 96:9C:CE:28:6B:FD
BROADCAST NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 00:1B:38:9C:2E:1D
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9134 errors:0 dropped:25 overruns:0 frame:0
TX packets:8206 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9521969 (9.0 MiB) TX bytes:1106566 (1.0 MiB)
Interrupt:18
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 00:1A:73:C5:2F:20
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B
"iwconfig" outputs
lo no wireless extensions.
dummy0 no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Actually, am coming from Windows and really do not have any idea what the above means. Since I was trying to get the wifi connected since two days now, have read in various forum to do the above and hence posting them here for reference.
I tried installing the "b43" drivers with no success.
Also tried "broadcom-wl" with no success.
Liked very much Slitaz, somehow wanted to use it. Please help getting my wifi to work with Slitaz.
Thanks!