SliTaz Forum

LXpanel wont load floating point error

(7 posts) (3 voices)

• Started 12 years ago by VERAULT
• Latest reply from VERAULT
• This topic is not resolved

Tags:

No tags yet.

1. 

   VERAULT
   

   offline

   Member

   Whenever I boot my Dell Latitude CPXH laptop with the battery in, LX panel will not load, It givesme a floating point error, I have to boot up the unit and slide in the battery after I boot. Also, if I keep the unit on long enough Lx panel stops working. This also happened on slitaz 3.0, but it is getting very frustrating. Any ideaS?

   Posted 12 years ago #
2. 

   ernia
   

   offline

   Member

   this is a very interesting bug, i doubt to be able to solve it but i'd like to try :-)
   would you post the output of
   dmesg
   and
   lsmod
   while booting with battery in?
   i would like to see the the exact lx panel error text too.

   Posted 12 years ago #
3. 

   Aleksej
   

   offline

   Coder-hobbyist

   Hi VERAULT,

   It's very strange, but you not the first on this forum with this error. I was asked some months ago, but can't find it yet.

   In short words, lxpanel battery applet is incompatible with your hardware. It's weird, I know. And this applet crushed whole lxpanel.

   You need to remove it. If you can, do it with your mouse. If not, edit your config file.

   See this: http://hg.slitaz.org/slitaz-configs/file/0dfc40410c31/rootfs/etc/lxpanel/slitaz/panels/panel
   Lines 126-140 is battery applet, and you need to remove them.

   Where to find this config file? Sorry, I write now from smartphone and have no SliTaz near hands now. System wide config files you find in the /etc/lxpanel/slitaz/panels/panel folder, and your current lxpanel config - somewhere in your home folder, in .config subfolder and deeper. Maybe ~/.config/lxpanel/slitaz/panels.

   You can start your lxpanel in terminal by command:
   lxpanel -p slitaz &
   and stop it by command:
   killall lxpanel

   Posted 12 years ago #
4. 

   VERAULT
   

   offline

   Member

   Ok here are the lsmod and dmesg outputs ernia.

   Aleksej, so my only option is to remove the battery applet? I take it there are no other battery check applets that Slitaz can use? I'm virtually out of luck

   Posted 12 years ago #
5. 

   VERAULT
   

   offline

   Member

   I dont know why but I havent been able to upload files to the forum in a while so I will cut and paste the files here

   Dmesg.txt

   pci 0000:00:07.3: PIIX4 devres C PIO at 0850-085f
   pci 0000:00:07.3: PIIX4 devres G PIO at 0280-0287
   pci 0000:00:08.0: [125d:1978] type 0 class 0x000401
   pci 0000:00:08.0: reg 10: [io 0xd800-0xd8ff]
   pci 0000:00:08.0: supports D1 D2
   pci 0000:00:08.0: PME# supported from D1 D2 D3hot
   pci 0000:00:08.0: PME# disabled
   pci 0000:01:00.0: [1002:4c4d] type 0 class 0x000300
   pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
   pci 0000:01:00.0: reg 14: [io 0xec00-0xecff]
   pci 0000:01:00.0: reg 18: [mem 0xfcfff000-0xfcffffff]
   pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
   pci 0000:01:00.0: supports D1 D2
   pci 0000:00:01.0: PCI bridge to [bus 01-01]
   pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
   pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfeffffff]
   pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
   pci_bus 0000:00: on NUMA node 0
   ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
   ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
   ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
   ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
   ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
   ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
   vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
   vgaarb: loaded
   SCSI subsystem initialized
   libata version 3.00 loaded.
   usbcore: registered new interface driver usbfs
   usbcore: registered new interface driver hub
   usbcore: registered new device driver usb
   PCI: Using ACPI for IRQ routing
   PCI: pci_cache_line_size set to 32 bytes
   reserve RAM buffer: 000000000009fc00 - 000000000009ffff
   reserve RAM buffer: 000000000ffdb000 - 000000000fffffff
   Switching to clocksource tsc
   pnp: PnP ACPI init
   ACPI: bus type pnp registered
   pnp 00:00: [mem 0x00000000-0x0009fbff]
   pnp 00:00: [mem 0x0009fc00-0x0009ffff]
   pnp 00:00: [mem 0x000c0000-0x000cffff]
   pnp 00:00: [mem 0x000f0000-0x000fffff]
   pnp 00:00: [mem 0x00100000-0x0ffeffff]
   pnp 00:00: [mem 0x0fff0000-0x0fffffff]
   pnp 00:00: [mem 0xffe00000-0xffffffff]
   pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
   pnp 00:01: [bus 00-ff]
   pnp 00:01: [io 0x0000-0x0cf7 window]
   pnp 00:01: [io 0x0cf8-0x0cff]
   pnp 00:01: [io 0x0d00-0xffff window]
   pnp 00:01: [mem 0x000a0000-0x000bffff window]
   pnp 00:01: [mem 0x000cc000-0x000effff window]
   pnp 00:01: [mem 0x10000000-0xffdfffff window]
   pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
   pnp 00:02: [io 0x0022]
   pnp 00:02: [io 0x0092]
   pnp 00:02: [io 0x00b2]
   pnp 00:02: [io 0x0020-0x0021]
   pnp 00:02: [io 0x00a0-0x00a1]
   pnp 00:02: [irq 2 disabled]
   pnp 00:02: [io 0x04d0-0x04d1]
   pnp 00:02: [io 0x0800-0x0805]
   pnp 00:02: [io 0x0808-0x080f]
   pnp 00:02: [io 0x0854-0x0855]
   pnp 00:02: disabling [io 0x0800-0x0805] because it overlaps 0000:00:07.3 BAR 7 [io 0x0800-0x083f]
   pnp 00:02: disabling [io 0x0808-0x080f] because it overlaps 0000:00:07.3 BAR 7 [io 0x0800-0x083f]
   pnp 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
   pnp 00:03: [io 0x00b3]
   pnp 00:03: [io 0x0806-0x0807]
   pnp 00:03: [io 0x0850-0x0853]
   pnp 00:03: [io 0x0856-0x085f]
   pnp 00:03: [io 0x0810-0x083f]
   pnp 00:03: [io 0x0840-0x084f]
   pnp 00:03: [io 0x0600-0x067f]
   pnp 00:03: [io 0x0680-0x06ff]
   pnp 00:03: disabling [io 0x0806-0x0807] because it overlaps 0000:00:07.3 BAR 7 [io 0x0800-0x083f]
   pnp 00:03: disabling [io 0x0810-0x083f] because it overlaps 0000:00:07.3 BAR 7 [io 0x0800-0x083f]
   pnp 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
   pnp 00:04: [io 0xf000-0xf0fe]
   pnp 00:04: [io 0xf100-0xf1fe]
   pnp 00:04: [io 0xf200-0xf2fe]
   pnp 00:04: [io 0xf400-0xf4fe]
   pnp 00:04: [io 0xf500-0xf5fe]
   pnp 00:04: [io 0xf600-0xf6fe]
   pnp 00:04: [io 0xf800-0xf8fe]
   pnp 00:04: [io 0xf900-0xf9fe]
   pnp 00:04: [io 0xfa00-0xfafe]
   pnp 00:04: [io 0xfc00-0xfcfe]
   pnp 00:04: [io 0xfd00-0xfdfe]
   pnp 00:04: [io 0xfe00-0xfefe]
   pnp 00:04: [mem 0xed000000-0xedffffff]
   pnp 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
   ERROR: Unable to locate IOAPIC for GSI 12
   pnp 00:05: [irq 12]
   pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
   pnp 00:06: [io 0x0060]
   pnp 00:06: [io 0x0064]
   ERROR: Unable to locate IOAPIC for GSI 1
   pnp 00:06: [irq 1]
   pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
   pnp 00:07: [io 0x0070-0x0071]
   ERROR: Unable to locate IOAPIC for GSI 8
   pnp 00:07: [irq 8]
   pnp 00:07: [io 0x0072-0x0077]
   pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
   pnp 00:08: [io 0x0061]
   pnp 00:08: [io 0x0063]
   pnp 00:08: [io 0x0065]
   pnp 00:08: [io 0x0067]
   pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
   pnp 00:09: [io 0x00e0-0x00e1]
   pnp 00:09: [io 0x03f0-0x03f1]
   pnp 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
   pnp 00:0a: [dma 4]
   pnp 00:0a: [io 0x0000-0x000f]
   pnp 00:0a: [io 0x0080-0x008f]
   pnp 00:0a: [io 0x00c0-0x00df]
   pnp 00:0a: [io 0x0010-0x001f]
   pnp 00:0a: [io 0x0090-0x0091]
   pnp 00:0a: [io 0x0093-0x009f]
   pnp 00:0a: Plug and Play ACPI device, IDs PNP0200 (active)
   pnp 00:0b: [io 0x00f0-0x00ff]
   ERROR: Unable to locate IOAPIC for GSI 13
   pnp 00:0b: [irq 13]
   pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
   ERROR: Unable to locate IOAPIC for GSI 6
   pnp 00:0c: [irq 6]
   pnp 00:0c: [io 0x03f2-0x03f5]
   pnp 00:0c: [io 0x03f7]
   pnp 00:0c: [dma 2]
   pnp 00:0c: Plug and Play ACPI device, IDs PNP0700 (active)
   ERROR: Unable to locate IOAPIC for GSI 4
   pnp 00:0d: [irq 4]
   pnp 00:0d: [io 0x03f8-0x03ff]
   pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
   ERROR: Unable to locate IOAPIC for GSI 3
   pnp 00:0e: [irq 3]
   pnp 00:0e: [io 0x02f8-0x02ff]
   pnp 00:0e: [io 0x0280-0x0287]
   pnp 00:0e: [dma 3]
   pnp 00:0e: Plug and Play ACPI device, IDs SMCf010 (active)
   pnp 00:0f: [dma 1]
   ERROR: Unable to locate IOAPIC for GSI 7
   pnp 00:0f: [irq 7]
   pnp 00:0f: [io 0x0378-0x037f]
   pnp 00:0f: [io 0x0778-0x077b]
   pnp 00:0f: Plug and Play ACPI device, IDs PNP0401 (active)
   pnp: PnP ACPI: found 16 devices
   ACPI: ACPI bus type pnp unregistered
   system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
   system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
   system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
   system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
   system 00:00: [mem 0x00100000-0x0ffeffff] could not be reserved
   system 00:00: [mem 0x0fff0000-0x0fffffff] has been reserved
   system 00:00: [mem 0xffe00000-0xffffffff] has been reserved
   system 00:02: [io 0x04d0-0x04d1] has been reserved
   system 00:02: [io 0x0854-0x0855] has been reserved
   system 00:03: [io 0x0850-0x0853] has been reserved
   system 00:03: [io 0x0856-0x085f] has been reserved
   system 00:03: [io 0x0840-0x084f] has been reserved
   system 00:03: [io 0x0600-0x067f] has been reserved
   system 00:03: [io 0x0680-0x06ff] has been reserved
   system 00:04: [io 0xf000-0xf0fe] has been reserved
   system 00:04: [io 0xf100-0xf1fe] has been reserved
   system 00:04: [io 0xf200-0xf2fe] has been reserved
   system 00:04: [io 0xf400-0xf4fe] has been reserved
   system 00:04: [io 0xf500-0xf5fe] has been reserved
   system 00:04: [io 0xf600-0xf6fe] has been reserved
   system 00:04: [io 0xf800-0xf8fe] has been reserved
   system 00:04: [io 0xf900-0xf9fe] has been reserved
   system 00:04: [io 0xfa00-0xfafe] has been reserved
   system 00:04: [io 0xfc00-0xfcfe] has been reserved
   system 00:04: [io 0xfd00-0xfdfe] has been reserved
   system 00:04: [io 0xfe00-0xfefe] has been reserved
   system 00:04: [mem 0xed000000-0xedffffff] has been reserved
   system 00:09: [io 0x03f0-0x03f1] has been reserved
   pci 0000:00:03.0: BAR 9: assigned [mem 0x14000000-0x17ffffff pref]
   pci 0000:00:03.0: BAR 10: assigned [mem 0x18000000-0x1bffffff]
   pci 0000:00:03.1: BAR 9: assigned [mem 0x1c000000-0x1fffffff pref]
   pci 0000:00:03.1: BAR 10: assigned [mem 0x20000000-0x23ffffff]
   pci 0000:00:01.0: BAR 9: assigned [mem 0x10100000-0x101fffff pref]
   pci 0000:00:03.0: BAR 0: assigned [mem 0x10200000-0x10200fff]
   pci 0000:00:03.0: BAR 0: set to [mem 0x10200000-0x10200fff] (PCI address [0x10200000-0x10200fff])
   pci 0000:00:03.1: BAR 0: assigned [mem 0x10201000-0x10201fff]
   pci 0000:00:03.1: BAR 0: set to [mem 0x10201000-0x10201fff] (PCI address [0x10201000-0x10201fff])
   pci 0000:00:03.0: BAR 7: assigned [io 0x1000-0x10ff]
   pci 0000:00:03.0: BAR 8: assigned [io 0x1400-0x14ff]
   pci 0000:00:03.1: BAR 7: assigned [io 0x1800-0x18ff]
   pci 0000:00:03.1: BAR 8: assigned [io 0x1c00-0x1cff]
   pci 0000:01:00.0: BAR 6: assigned [mem 0x10100000-0x1011ffff pref]
   pci 0000:00:01.0: PCI bridge to [bus 01-01]
   pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
   pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfeffffff]
   pci 0000:00:01.0: bridge window [mem 0x10100000-0x101fffff pref]
   pci 0000:00:03.0: CardBus bridge to [bus 02-05]
   pci 0000:00:03.0: bridge window [io 0x1000-0x10ff]
   pci 0000:00:03.0: bridge window [io 0x1400-0x14ff]
   pci 0000:00:03.0: bridge window [mem 0x14000000-0x17ffffff pref]
   pci 0000:00:03.0: bridge window [mem 0x18000000-0x1bffffff]
   pci 0000:00:03.1: CardBus bridge to [bus 06-09]
   pci 0000:00:03.1: bridge window [io 0x1800-0x18ff]
   pci 0000:00:03.1: bridge window [io 0x1c00-0x1cff]
   pci 0000:00:03.1: bridge window [mem 0x1c000000-0x1fffffff pref]
   pci 0000:00:03.1: bridge window [mem 0x20000000-0x23ffffff]
   pci 0000:00:03.0: enabling device (0000 -> 0003)
   ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
   PCI: setting IRQ 11 as level-triggered
   pci 0000:00:03.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
   pci 0000:00:03.1: enabling device (0000 -> 0003)
   pci 0000:00:03.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
   pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
   pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
   pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
   pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfeffffff]
   pci_bus 0000:01: resource 2 [mem 0x10100000-0x101fffff pref]
   pci_bus 0000:02: resource 0 [io 0x1000-0x10ff]
   pci_bus 0000:02: resource 1 [io 0x1400-0x14ff]
   pci_bus 0000:02: resource 2 [mem 0x14000000-0x17ffffff pref]
   pci_bus 0000:02: resource 3 [mem 0x18000000-0x1bffffff]
   pci_bus 0000:06: resource 0 [io 0x1800-0x18ff]
   pci_bus 0000:06: resource 1 [io 0x1c00-0x1cff]
   pci_bus 0000:06: resource 2 [mem 0x1c000000-0x1fffffff pref]
   pci_bus 0000:06: resource 3 [mem 0x20000000-0x23ffffff]
   NET: Registered protocol family 2
   IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
   TCP established hash table entries: 8192 (order: 4, 65536 bytes)
   TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
   TCP: Hash tables configured (established 8192 bind 8192)
   TCP reno registered
   UDP hash table entries: 128 (order: 0, 4096 bytes)
   UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
   NET: Registered protocol family 1
   RPC: Registered udp transport module.
   RPC: Registered tcp transport module.
   RPC: Registered tcp NFSv4.1 backchannel transport module.
   pci 0000:00:00.0: Limiting direct PCI/PCI transfers
   pci 0000:01:00.0: Boot video device
   PCI: CLS 32 bytes, default 32
   apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
   apm: overridden by ACPI.
   VFS: Disk quotas dquot_6.5.2
   Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
   fuse init (API version 7.15)
   SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
   SGI XFS Quota Management subsystem
   msgmni has been set to 494
   io scheduler noop registered
   io scheduler deadline registered (default)
   ACPI: AC Adapter [AC] (on-line)
   ACPI: acpi_idle registered with cpuidle
   Marking TSC unstable due to TSC halts in idle
   Switching to clocksource acpi_pm
   Switched to NOHz mode on CPU #0
   thermal LNXTHERM:00: registered as thermal_zone0
   ACPI: Thermal Zone [THM] (34 C)
   isapnp: Scanning for PnP cards...
   isapnp: No Plug & Play device found
   Non-volatile memory driver v1.3
   Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
   serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
   serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
   00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
   ACPI: Battery Slot [BAT0] (battery present)
   brd: module loaded
   ACPI: Battery Slot [BAT1] (battery present)
   loop: module loaded
   Uniform Multi-Platform E-IDE driver
   piix 0000:00:07.1: IDE controller (0x8086:0x7111 rev 0x01)
   piix 0000:00:07.1: not 100% native mode: will probe irqs later
   ide0: BM-DMA at 0x0860-0x0867
   ide1: BM-DMA at 0x0868-0x086f
   Probing IDE interface ide0...
   hda: HITACHI_DK239A-65B, ATA DISK drive
   hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
   hda: UDMA/33 mode selected
   Probing IDE interface ide1...
   ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
   ide1 at 0x170-0x177,0x376 on irq 15
   ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
   ide-gd driver 1.18
   hda: max request size: 128KiB
   hda: 12594960 sectors (6448 MB) w/512KiB Cache, CHS=13328/15/63
   hda: cache flushes not supported
   hda: hda1 hda2
   ide-cd driver 5.00
   e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
   e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
   pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
   e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
   e100: Copyright(c) 1999-2006 Intel Corporation
   ThunderLAN driver v1.15a
   TLAN: 0 devices installed, PCI: 0 EISA: 0
   ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
   PPP generic driver version 2.4.2
   PPP Deflate Compression module registered
   PPP BSD Compression module registered
   PPP MPPE Compression module registered
   NET: Registered protocol family 24
   tun: Universal TUN/TAP device driver, 1.6
   tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
   dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
   winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
   http://www.scyld.com/network/drivers.html
   ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
   ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
   uhci_hcd: USB Universal Host Controller Interface driver
   uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
   uhci_hcd 0000:00:07.2: UHCI Host Controller
   uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
   uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dce0
   hub 1-0:1.0: USB hub found
   hub 1-0:1.0: 2 ports detected
   Initializing USB Mass Storage driver...
   usbcore: registered new interface driver usb-storage
   USB Mass Storage support registered.
   PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
   serio: i8042 KBD port at 0x60,0x64 irq 1
   serio: i8042 AUX port at 0x60,0x64 irq 12
   mice: PS/2 mouse device common for all mice
   input: PC Speaker as /devices/platform/pcspkr/input/input0
   cpuidle: using governor ladder
   cpuidle: using governor menu
   usbcore: registered new interface driver usbhid
   usbhid: USB HID core driver
   TCP cubic registered
   NET: Registered protocol family 17
   NET: Registered protocol family 15
   Using IPI No-Shortcut mode
   input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
   input: DualPoint Stick as /devices/platform/i8042/serio1/input/input2
   input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input3
   EXT4-fs (hda1): mounted filesystem without journal. Opts: (null)
   VFS: Mounted root (ext2 filesystem) readonly on device 3:1.
   Freeing unused kernel memory: 408k freed
   EXT4-fs (hda1): re-mounted. Opts: barrier=1,data=writeback
   EXT4-fs (hda1): re-mounted. Opts: barrier=1,data=writeback
   <30>udevd[671]: starting version 170

   Posted 12 years ago #
6. 

   VERAULT
   

   offline

   Member

   Module Size Used by Not tainted
   aes_i586 6816 1
   aes_generic 25742 1 aes_i586
   ath5k 111977 0
   ath 9811 1 ath5k
   parport_pc 16061 0
   floppy 41138 0
   video 9783 0
   parport 20983 1 parport_pc
   output 1144 1 video
   intel_agp 7908 1
   button 3602 0
   intel_gtt 9214 1 intel_agp
   agpgart 18221 2 intel_agp,intel_gtt
   mac80211 145388 1 ath5k
   cfg80211 99896 3 ath5k,ath,mac80211
   rfkill 10682 1 cfg80211
   snd_es1968 16540 0
   gameport 5761 1 snd_es1968
   snd_ac97_codec 77963 1 snd_es1968
   ac97_bus 718 1 snd_ac97_codec
   snd_pcm 43737 2 snd_es1968,snd_ac97_codec
   snd_timer 12515 1 snd_pcm
   snd_page_alloc 4853 2 snd_es1968,snd_pcm
   snd_mpu401_uart 3975 1 snd_es1968
   snd_rawmidi 12384 1 snd_mpu401_uart
   snd_seq_device 3757 1 snd_rawmidi
   snd 33394 7 snd_es1968,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
   soundcore 3357 1 snd
   pcmcia 24993 0
   yenta_socket 16223 0
   pcmcia_rsrc 6989 1 yenta_socket
   pcmcia_core 8413 3 pcmcia,yenta_socket,pcmcia_rsrc

   Posted 12 years ago #
7. 

   VERAULT
   

   offline

   Member

   I realize I started this post a few years ago, However I still get this error everytime I add the battery pack into my dell laptop. I have to run the laptop on ac power just to use lxpanel.

   I posted the dmesg.txt, anyone else have an idea?

   Posted 8 years ago #

RSS feed for this topic

Reply

You must log in to post.