Hi,
I bought a new wlan-usb. It seems to be detected:
wlan0 Ralink STA ESSID:"" Nickname:"RT2870STA"
Mode:Auto Frequency=2.462 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
RTS thr:off Fragment thr:off
Encryption key:off
Link Quality=100/100 Signal level:-40 dBm Noise level:-105 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
root@slitaz:~# lsmod
Module Size Used by Tainted: G
rt2800usb 7855 0
rt2800lib 24574 1 rt2800usb
rt2x00usb 5720 1 rt2800usb
rt2x00lib 20851 3 rt2800usb,rt2800lib,rt2x00usb
mac80211 145388 3 rt2800lib,rt2x00usb,rt2x00lib
cfg80211 99896 2 rt2x00lib,mac80211
rfkill 10682 1 cfg80211
rt2870sta 316830 1
root@slitaz:~# lsusb
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 002: ID 05e3:0608
Bus 001 Device 003: ID 148f:3070
- but it does not connect. The configuration seems ok, but the values of /etc/network.conf are not used, somehow.
Any idea?