SliTaz Forum

SliTaz 4.0-RC2 - Feedback

(182 posts) (47 voices)

• Started 12 years ago by pankso
• Latest reply from Anonymous
• This topic is not a support question

Tags:

No tags yet.

1. 

   aniguenni
   

   offline

   Member

   Midori 0.4.4 crashes e.g. with kwick.de as well.
   Better solution for me still is firefox or iron.
   Hopefully the Midori developers get this fixed.

   Posted 12 years ago #
2. 

   michaelbischof
   

   offline

   Member

   @mojo
   ,,I only speak english :-)"
   What I want to talk about is really OT. How can we arrange that? (Chat programs I do not like, though...)

   Posted 12 years ago #
3. 

   mojo
   

   offline

   Key Master

   @aniguenni
   Start midori in xterm.
   When it crash's I get this error:
   midori: cairo-surface.c:1287: cairo_surface_set_device_offset: Assertion `status == CAIRO_STATUS_SUCCESS' failed.
   Aborted

   kwick.de crashes,as well as if I type into the URL or search bar and hit enter.
   Same issue with tazweb since it's somehow libwebkit related.
   Problem only happens on my 2004 AthlonXP computer not a problem on the others.
   There are bug reports on it as well as https sites causing crashes from some midori users.

   Posted 12 years ago #
4. 

   rjarrrpcgp
   

   offline

   Member

   @mojo Maybe your 2004 old schooler is sick. :( (Possibly bad caps O_O)
   I just hope it don't have GSCs!

   Has Midori crashed on weather.com for anybody?

   With the early builds, I bet it would crash when I go to the local forecast section.

   Posted 12 years ago #
5. 

   rd.nmc
   

   offline

   Member

   @mojo: I found on another forum about CAIRO_STATUS_SUCCESS' failed. this issue because libgcrypt 1.5.0. usually occurs when accessing url with password login. and can be solved with a downgrade version of libgcrypt. but, I do not know how.

   Posted 12 years ago #
6. 

   kobra_13
   

   offline

   Member

   when are you going to release slitaz 4.0 Stable (final) ?

   Posted 12 years ago #
7. 

   mojo
   

   offline

   Key Master

   @aniguenni
   Please install this: http://people.slitaz.org/~mojo/packages/libgcrypt-1.4.6.tazpkg
   It fixed all issues on my computer with midori 0.4.4 problems.

   @rd.nmc
   Thanks for the information on downgrading libgcrypt :-)

   Posted 12 years ago #
8. 

   aniguenni
   

   offline

   Member

   @ mojo
   thank you for your assistance. i installed the above. but kwick.de still stucks. after that i did upgrade libgcrypt to 1.5.0 but without any effect. still stucking kwick website. ;-(
   but this is not a major problem. the more important thing is to get my windows programs running such as garmin mapsource. on search engine i read that this will run stable with newer wine version as 1.2.3.

   Posted 12 years ago #
9. 

   tazpider
   

   offline

   Member

   Hi everyone.
   I've tried to run SliTaz on HP 6510b
   No matter which version of 4.0 (RC1, RC2, RC3, rolling isos) I boot, no wireless networks are found.
   Module for iwl3945 is detected and loaded I guess, just no networks visible.

   I'm a beginner, please advice me how should I proceed to get workin wlan0

   P.S. eth0 works fine.
   This hint doesn't work for me http://forum.slitaz.org/topic/no-joy-on-toshibe-tecra-m7-with-iwl3945-wireless#post-4225

   Posted 12 years ago #
10. 

    aniguenni
    

    offline

    Member

    @ tazspider
    maybe because of missing firmware?
    try to install the related firmware iwl3945.
    same problems i have had with my lifebook (module ipw2200). it shows the module after tazhw detect-pci but on dmesg | grep (your module) i got the message, that the firmware is missing. after installing, do the following steps:

    modprobe -r iwl3945
    modprobe iwl 3945
    nano /etc/network.conf
    and change the following:
    WIFI="yes"
    WIFI INTERFACE="eth0"
    put your essid, mode, key and key type into the relevated places and if you have WPA, than don't forget
    WPA-DRIVER="wext"
    after that
    /etc/init.d/network.sh restart

    good luck ;-)

    Posted 12 years ago #
11. 

    tazpider
    

    offline

    Member

    @aniguenni
    Thank you. It works now :)
    Finally I can start testing Slitaz.

    Posted 12 years ago #
12. 

    Darjeeling
    

    offline

    Member

    ----- Boot Options
    What is the difference between "SliTaz Live" and "SliTaz core Live"?

    ----- Group
    In "/etc/group" both, tape and haldaemon have the same group identifier 26. Shouldn't the GID be unique?

    ----- LXpanel
    The panel still disappears when the "Minimize all windows" applet is clicked. Since task manager reports that LXpanel is still running, I guess the panel has itself been "minimized". One way around this is to remove both default panels and to create a new blank panel. The "Minimize all windows" applet works normally in this panel.

    ----- Opera
    After installation, Opera can be started in the "Live" and "Core Live" versions but not in "GTKonly Live", which returns in the terminal "Could not initialize Opera". There seem to be missing dependencies, either in the Opera package or in "GTKonly Live". In the other two Slitaz versions Opera works well until one tries to close it, which brings up an ugly looking Qt box saying:

    It appears another Opera instance is using the same configuration directory because its lock file is active: /home/tux/.opera/lock
    Do you want to start Opera anyway? y/n

    ... at the same time the terminal says:

    opera [crash logging]: Crash log writing failed, error writing to file
    /var/tmp/crash20120321000553.txt! Illegal instruction

    ----- Boot Log: Slitaz Live and Slitaz Core Live
    Starting TazBox configuration...

    XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":1"

    after 3241 requests (3240 known processed) with 0 events remaining.

    error setting MTRR (base = 0xe0000000, size = 0x08000000, type = 1) Invalid argument (22)

    ----- Boot Log: Slitaz GTKonly Live
    Starting TazBox configuration...

    Fatal server error:
    no screens found

    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    Please also check the log file at "/var/log/Xorg.1.log" for additional information.

    Openbox-Message: Failed to open the display from the DISPLAY environment variable.

    (yad:1352): Gtk-WARNING **: cannot open display: :1

    ----- GTKonly: wish list
    - audio should be configured by default
    - boot-up should prompt for keymap and locale
    - GTK/Yad boxes for Tazpkg and Tazlito would be nice

    Posted 12 years ago #
13. 

    Darjeeling
    

    offline

    Member

    I forgot to mention that I was using last night's "slitaz-rolling.iso", 2012-Mar-20 21:14:59.

    Posted 12 years ago #
14. 

    nitrogen_widget
    

    offline

    Member

    Installed RC 3 on an older Dell laptop.
    I have no internet.
    wireless find my router, says it's connected & shows me signal strength but no internet.
    With wired LAN I got nothing.
    Doesn't seem like DHCP is working.

    Any ideas?

    Posted 12 years ago #
15. 

    pankso
    

    offline

    Key Master

    Is it a WEP encrypted wifi ? What is says from cmdline:

    # /etc/init.d/network.sh restart

    Posted 12 years ago #

RSS feed for this topic

Reply »

You must log in to post.